GitLab

This patch groups all the platform configuration macros into
the common platform.mk makefile.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

CSS: Allow system suspend only via PSCI SYSTEM_SUSPEND API

tspd:FWU:Fix usage of SMC_RET0

drivers: ti: uart: remove UART_FCR read-modify-write

fiptool: Support non-decimal --align arguments

lib: stdbool header from the FreeBSD project

Minor refactor of BL2 image load v2

xlat lib: Use mmap_attr_t type consistently

The CSS power management layer previously allowed to suspend system
power domain level via both PSCI CPU_SUSPEND and PSCI SYSTEM_SUSPEND
APIs. System suspend via PSCI CPU_SUSPEND was always problematic to
support because of issues with targeting wakeup interrupts to
suspended cores before the per-cpu GIC initialization is done. This
is not the case for PSCI SYSTEM_SUSPEND API because all the other
cores are expected to be offlined prior to issuing system suspend and
PSCI CPU_ON explicit calls will be made to power them on. Hence the Juno
platform used to downgrade the PSCI CPU_SUSPEND request for system
power domain level to cluster level by overriding the default
`plat_psci_pm_ops` exported by CSS layer.

Given the direction the new CSS platforms are evolving, it is best to
limit the system suspend only via PSCI SYSTEM_SUSPEND API for all
CSS platforms. This patch makes changes to allow system suspend
only via PSCI SYSTEM_SUSPEND API. The override of `plat_psci_ops`
for Juno is removed.

Change-Id: Idb30eaad04890dd46074e9e888caeedc50a4b533
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

An alignment value of 0x4000 is much easier to type than 16384,
so enhance get_image_align() to recognize a 0x prefix for hexadecimals.
Signed-off-by: Andreas Färber <afaerber@suse.de>

This patch removes the code that touched UART_FCR, from
console_core_putc(). The check for whether transmit FIFO is
full is sufficient before writing to UART TX FIFO. In fact
setting UARTFCR_TXCLR immediately after a byte is written to
FIFO might even result in loss of that byte, if UART hasn't
sent that byte out yet.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: smmu: make the context save sequence robust

Add AArch32 support for Juno

Tegra186: Support AARCH32/64 encoding for MCE calls

PSCI: Build option to enable D-Caches early in warmboot

ARM platforms: Add option to use xlat tables lib v1

Add `ENABLE_ASSERTIONS` build option

This patch sanity checks the SMMU context created by the platform
code. The first entry contains the size of the array; which the
driver now verifies before moving on with the save.

This patch also fixes an error in the calculation of the size of
the context that gets copied to TZDRAM.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.

Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
  Loads SP_MIN & BL33 (AArch32 executable)images.
  Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
  at the entrypoint address of SP_MIN, at HI-VECTOR address and
  then request for warm reset in AArch32 state using RMR_EL3.

This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
  HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
  SP_MIN and BL33 AArch32 executable images.

A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.

NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.

Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch adds AArch32 state support for ARM Cortex-A53,
Cortex-A57 and Cortex-A72 MPCore Processor in the CPU specific
operations framework.

NOTE: CPU errata handling code is not present in this patch.

Change-Id: I01eb3e028e40dde37565707ebc99e06e7a0c113d
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

If there is a pending interrupt, it is possible for the AP to come out
of the final WFI before SCP has a chance to act on it.  Prevent this
by disabling the GIC CPU interface before issuing a WFI.

Previously, SCP would not wait on WFI before taking an action but
would shut down the core or system regardless.

Change-Id: Ib0bcf69a515d540ed4f73c11e40ec7c863e39c92
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch modifies both versions of the translation table library
to use the mmap_attr_t type consistently wherever it is manipulating
MT_* attributes variables. It used to use mmap_attr_t or plain integer
types interchangeably, which compiles fine because an enumeration type
can be silently converted to an integer, but which is semantically
incorrect.

This patch removes this assumption by using the abstract type
'mmap_attr_t' all the time.

Change-Id: Id1f099025d2cb962b275bb7e39ad2c4dbb4e366c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Many asserts depend on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.

Change-Id: I6406674788aa7e1ad7c23d86ce94482ad3c382bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.

All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.

ASM_ASSERTION has been removed from the user guide.

Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SMC_RET0 should only be used when the SMC code works as a function that
returns void. If the code of the SMC uses SMC_RET1 to return a value to
signify success and doesn't return anything in case of an error (or the
other way around) SMC_RET1 should always be used to return clearly
identifiable values.

This patch fixes two cases in which the code used SMC_RET0 instead of
SMC_RET1.

It also introduces the define SMC_OK to use when an SMC must return a
value to tell that it succeeded, the same way as SMC_UNK is used in case
of failure.

Change-Id: Ie4278b51559e4262aced13bbde4e844023270582
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Tegra: smmu: fix the size used to save context

This patch pulls the stdbool.h header file from the FreeBSD
project. The platforms require this header to fix many MISRA
defects among other things.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the size used to save the context, when the
device enters System Suspend.

Reported by: David Cunado
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Previously, get_next_bl_params_from_mem_params_desc() populated arg0
in the EL3 runtime entrypoint with a bl_params_t pointer. This is the
responsibility of the generic LOAD_IMAGE_V2 framework instead of the
descriptor-based image loading utility functions. Therefore this patch
moves that code to bl2_load_images().

Also, this patch moves the code that flushes the bl_params structure to
flush_bl_params_desc(), together with the other descriptor-based image
loading flushing code.

Change-Id: I4541e3f50e3878dde7cf89e9e8f31fe0b173fb9d
Signed-off-by: Dan Handley <dan.handley@arm.com>

Add the new build option `ENABLE_ASSERTIONS` that controls whether or
not assert functions are compiled out. It defaults to 1 for debug builds
and to 0 for release builds.

Additionally, a following patch will be done to allow this build option
to hide auxiliary code used for the checks done in an `assert()`. This
code is is currently under the DEBUG build flag.

Assert messages are now only printed if LOG_LEVEL >= LOG_LEVEL_INFO,
which is the default for debug builds.

This patch also updates the User Guide.

Change-Id: I1401530b56bab25561bb0f274529f1d12c5263bc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch introduces a build option to enable D-cache early on the CPU
after warm boot. This is applicable for platforms which do not require
interconnect programming to enable cache coherency (eg: single cluster
platforms). If this option is enabled, then warm boot path enables
D-caches immediately after enabling MMU.

Fixes ARM-Software/tf-issues#456

Change-Id: I44c8787d116d7217837ced3bcf0b1d3441c8d80e
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

ARM platforms have migrated to the translation tables library v2.
However, for testing purposes, it can be useful to temporarily switch
back to the old version.

This patch introduces the option `ARM_XLAT_TABLES_LIB_V1`, that switches
to v1 of the library when is set to 1. By default, it is 0, so that ARM
platforms use the new version unless specifically stated.

Updated User Guide.

Change-Id: I53d3c8dd97706f6af9c6fca0364a88ef341efd31
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

C files shouldn't be included into others. This file only contains some
macros and functions that can be made `static inline`, so it is ok to
convert it into a header file.

This is the only occurrence of a C file being included in another one in
the codebase instead of using a header, other occurrences are a way of
achieving backwards-compatibility.

Functions therein have been qualified as `inline`.

Change-Id: I88fe300f6d85a7f0740ef14c9cb8fa54849218e6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

On Tegra systems, there are multiple software components that
require to interact with MCE. The components can either be 32-bit
or 64-bit payloads. This patch supports MCE SMC functions ID for
AARCH32 and AARCH64 architectures to support such clients.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Replace tf_printf occurrences with ERROR

Tegra186 platform support v6

Build: add generic way to include SCP_BL2 into FIP image

Tegra: memctrl_v1: enable 'xlat_table_v2' library

Not having U or ULL as a suffix for these enums causes
a lot of unnecessary MISRA issues. This patch adds U or
ULL suffix to these common enums to reduce number of
MISRA issues.
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>