Skip to content

GitLab

Switch branch/tag
  1. 23 Jun, 2020 1 commit
    • Etienne Carriere's avatar
      stm32mp1: use last page of SYSRAM as SCMI shared memory · 0754143a
      Etienne Carriere authored 
      

SCMI shared memory is used to exchange message payloads between
secure SCMI services and non-secure SCMI agents. It is mapped
uncached (device) mainly to conform to existing support in
the Linux kernel. Note that executive messages are mostly short
(few 32bit words) hence not using cache will not penalize much
performances.

Platform stm32mp1 shall configure ETZPC to harden properly the
secure and non-secure areas of the SYSRAM address space, that before
CPU accesses the shared memory when mapped non-secure.

This change defines STM32MP_SEC_SYSRAM_BASE/STM32MP_SEC_SYSRAM_SIZE and
STM32MP_NS_SYSRAM_BASE/STM32MP_NS_SYSRAM_SIZE.

Change-Id: I71ff02a359b9668ae1c5a71b5f102cf3d310f289
Signed-off-by: default avatarEtienne Carriere <etienne.carriere@st.com>
      0754143a
  3. 03 Jun, 2020 1 commit
  5. 01 Jun, 2020 1 commit
    • Etienne Carriere's avatar
      drivers: stm32_reset adapt interface to timeout argument · 45c70e68
      Etienne Carriere authored 
      

Changes stm32mp1 reset driver to API to add a timeout argument
to stm32mp_reset_assert() and stm32mp_reset_deassert() and
a return value.

With a supplied timeout, the functions wait the target reset state
is reached before returning. With a timeout of zero, the functions
simply load target reset state in SoC interface and return without
waiting.

Helper functions stm32mp_reset_set() and stm32mp_reset_release()
use a zero timeout and return without a return code.

This change updates few stm32 drivers and plat/stm32mp1 blé_plat_setup.c
accordingly without any functional change.
functional change.

Change-Id: Ia1a73a15125d3055fd8739c125b70bcb9562c27f
Signed-off-by: default avatarEtienne Carriere <etienne.carriere@st.com>
      45c70e68
  7. 11 May, 2020 2 commits
  9. 28 Apr, 2020 1 commit
    • Andre Przywara's avatar
      plat/stm32: Use generic fdt_read_uint32_array() implementation · 52a616b4
      Andre Przywara authored 
      

The device tree parsing code for the STM32 platform is using its own FDT
helper functions, some of them being rather generic.
In particular the existing fdt_read_uint32_array() implementation is now
almost identical to the new generic code in fdt_wrappers.c, so we can
remove the ST specific version and adjust the existing callers.

Compared to the original ST implementation the new version takes a
pointer to the DTB as the first argument, and also swaps the order of
the number of cells and the pointer.

Change-Id: Id06b0f1ba4db1ad1f733be40e82c34f46638551a
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      52a616b4
  11. 26 Mar, 2020 4 commits
    • Yann Gautier's avatar
      stm32mp1: use stm32mp_get_ddr_ns_size() function · 5813e6ed
      Yann Gautier authored 
      

Instead of using dt_get_ddr_size() and withdrawing the secure and shared
memory areas, use stm32mp_get_ddr_ns_size() function.

Change-Id: I5608fd7873589ea0e1262ba7d2ee3e52b53d9a7d
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      5813e6ed
    • Yann Gautier's avatar
      stm32mp1: set XN attribute for some areas in BL2 · 9c52e69f
      Yann Gautier authored 
      

DTB and BL32 area should not be set as executable in MMU during BL2
execution, hence set those areas as MT_RO_DATA.

Change-Id: I87c47a1e7fda761e541ec98a5b294588384d31db
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      9c52e69f
    • Yann Gautier's avatar
      stm32mp1: dynamically map DDR later and non-cacheable during its test · 84686ba3
      Yann Gautier authored 
      

A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.

The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.

PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.

BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.

Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      84686ba3
    • Yann Gautier's avatar
      stm32mp1: add a function to get non-secure DDR size · e6cc3ccf
      Yann Gautier authored 
      

This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.

Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      e6cc3ccf
  13. 25 Feb, 2020 6 commits
  15. 28 Jan, 2020 1 commit
    • Madhukar Pappireddy's avatar
      Enable -Wredundant-decls warning check · ca661a00
      Madhukar Pappireddy authored 
      

This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.

Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):

IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);

The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.

Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment

static const unsigned long BL2_RO_BASE = BL_CODE_BASE;

Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: default avatarMadhukar Pappireddy <madhukar.pappireddy@arm.com>
      ca661a00
  17. 24 Jan, 2020 1 commit
  19. 20 Jan, 2020 5 commits
  21. 27 Nov, 2019 1 commit
  23. 23 Sep, 2019 1 commit
    • Lionel Debieve's avatar
      stm32mp1: add authentication support for stm32image · 4bdb1a7a
      Lionel Debieve authored 
      

This commit adds authentication binary support for STM32MP1.
It prints the bootrom authentication result if signed
image is used and authenticates the next loaded STM32 images.
It also enables the dynamic translation table support
(PLAT_XLAT_TABLES_DYNAMIC) to use bootrom services.
Signed-off-by: default avatarLionel Debieve <lionel.debieve@st.com>
Change-Id: Iba706519e0dc6b6fae1f3dd498383351f0f75f51
      4bdb1a7a
  25. 20 Sep, 2019 1 commit
  27. 10 Sep, 2019 1 commit
  29. 02 Sep, 2019 7 commits
  31. 01 Aug, 2019 1 commit
    • Julius Werner's avatar
      Replace __ASSEMBLY__ with compiler-builtin __ASSEMBLER__ · d5dfdeb6
      Julius Werner authored 
      

NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.

All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.

Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      d5dfdeb6
  33. 28 Jun, 2019 1 commit
  35. 17 Jun, 2019 4 commits