GitLab

When the source code says 'SMCC' it is talking about the SMC Calling
Convention. The correct acronym is SMCCC. This affects a few definitions
and file names.

Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S)
but the old files have been kept for compatibility, they include the
new ones with an ERROR_DEPRECATED guard.

Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Release v1.5: Update minor version number to 5

Update readme.rst for v1.5 release

Update user guide

Following Out of Box testing for v1.5 release:

    Update host OS version to Ubuntu 16.04
    Clarify configuration files needed for checkpatch
    Add note on using Linaro precompiled binaries

Change-Id: Ia4ae61e01128ddff1a288972ddf84b79370fa52c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

Change-Id: Id9bd0c20a5af4f41269a51a675018dcc59e93f6c
Signed-off-by: Dan Handley <dan.handley@arm.com>

Change-Id: Ib215150272acc2ecec43f9b69624ebbbd5d7492d
Signed-off-by: David Cunado <david.cunado@arm.com>

Docs: Update various for v1.5 release

The CI has been updated to run tests against the AEMv8-A RevC
model, FVP_Base_RevC-2xAEMv8A, which is available from the Fast
Model releases on Connected Community [1].

Additionally, the CI now also includes the Cortex-A55x4, Cortex-A75x4
and Cortex-A55x4-A75x4 Base models.

[1] https://developer.arm.com/products/system-design/fixed-virtual-platforms



Change-Id: I57806f3b2a8121211490a7aa0089dcae566d8635
Signed-off-by: David Cunado <david.cunado@arm.com>

Updated change-log.rst with summary of changes since
release v1.4.

Change-Id: I56b5a30d13a5a7099942535cbaeff0e2a5c5804e
Signed-off-by: David Cunado <david.cunado@arm.com>

Update Arm Trusted Firmware references in the upstream documents to
Trusted Firmware-A (TF-A). This is for consistency with and
disambiguation from Trusted Firmware-M (TF-M).

Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A.

Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22
Signed-off-by: Dan Handley <dan.handley@arm.com>
Signed-off-by: David Cunado <david.cunado@arm.com>

Docs: Update design guide for dynamic config

FVP AArch32: Fix flash access in BL32 for mem_protect

The FVP platform port for SP_MIN (BL32) didn't map the flash memory
in BL32 for stroring the mem_protect enable state information leading
to synchronous exception. The patch fixes it by adding the region to
the BL32 mmap tables.

Change-Id: I37eec83c3e1ea43d1b5504d3683eebc32a57eadf
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

Implement support for v1.2 of firmware interfaces spec (ARM DEN 0070A)

When querying `SMCCC_ARCH_WORKAROUND_1` through `SMCCC_ARCH_FEATURES`,
return either:
  * -1 to indicate the PE on which `SMCCC_ARCH_FEATURES` is called
    requires firmware mitigation for CVE-2017-5715 but the mitigation
    is not compiled in.
  * 0 to indicate that firmware mitigation is required, or
  * 1 to indicate that no firmware mitigation is required.

This patch complies with v1.2 of the firmware interfaces
specification (ARM DEN 0070A).

Change-Id: Ibc32d6620efdac6c340758ec502d95554a55f02a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

If the CSV2 field reads as 1 then branch targets trained in one
context cannot affect speculative execution in a different context.
In that case skip the workaround on Cortex A72 and A73.

Change-Id: Ide24fb6efc77c548e4296295adc38dca87d042ee
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This patch updates the `firmware-design.rst` document for
changes in ARM-TF for supporting dynamic configuration features
as presented in `Secure Firmware BoF SFO'17`[1].

The patch also updates the user-guide for 2 build options for FVP
pertaining to dynamic config.

[1] https://www.slideshare.net/linaroorg/bof-device-tree-and-secure-firmware-bof-sfo17310



Change-Id: Ic099cf41e7f1a98718c39854e6286d884011d445
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Juno: Fixes for firmware update

hikey: migrate to BL2_EL3

Previously, Juno used to depend on the SSC_GPRETN register to inform
about the reset syndrome. This method was removed when SCP migrated
to the SDS framework. But even the SDS framework doesn't report the
reset syndrome correctly and hence Juno failed to enter Firmware
update mode if BL2 authentication failed.

In addition to that, the error code populated in V2M_SYS_NVFLAGS register
does not seem to be retained any more on Juno across resets. This could
be down to the motherboard firmware not doing the necessary to preserve
the value.

Hence this patch modifies the Juno platform to use the same mechanism to
trigger firmware update as FVP which is to corrupt the FIP TOC on
authentication failure. The implementation in `fvp_err.c` is made common
for ARM platforms and is moved to the new `arm_err.c` file in
plat/arm/common folder. The BL1 and BL2 mmap table entries for Juno
are modified to allow write to the Flash memory address.

Change-Id: Ica7d49a3e8a46a90efd4cf340f19fda3b549e945
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Fix build with clang on hikey

This issue was detected when testing FWU on Juno. The Timer
`timer_ops` was not being initialized before being used by
the SDS driver on Juno. This patch adds the call to
`generic_delay_timer_init()` during bl2u_early_platform_setup().
This is done generically for all ARM platforms because the
cost involved is minimal.

Change-Id: I349cf0bd1db68406eb2298b65f9c729f792cabdc
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Trusty fixes

bl2-el3: Fix bl32 lr_svc used for bl33 entry address

plat/hisilicon/hikey/hikey_bl1_setup.c:565:47:
error: value size does not match register size specified by the
constraint and modifier [-Werror,-Wasm-operand-widths]
        __asm__ volatile ("mrs  %0, cpacr_el1" : "=r"(data));
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

plat/hisilicon/hikey960/drivers/pwrc/hisi_pwrc.c:290:20:
error: unused function 'hisi_pdc_set_intmask' [-Werror,-Wunused-function]
static inline void hisi_pdc_set_intmask(void *pdc_base_addr,
                   ^
1 error generated.
Makefile:605: recipe for target 'build/hikey960/release/bl31/hisi_pwrc.o' failed
make: *** [build/hikey960/release/bl31/hisi_pwrc.o] Error 1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Change-Id: Ibfb75145e3a31ae2106eedfbe4a91c2e31bb9f2a

When using BL2_EL3, we need to ensure that lr_svc is
properly given to bl32 as it was previously made by bl1.

Fixes ARM-Software/tf-issues#562
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Dynamic cfg: Do not populate args if already initialized

This patch modifies the common utility function
`populate_next_bl_params_config()` to only modify the entrypoint arguments
to an executable image only if they are not initialized earlier.
This issue was detected while testing Optee on ARM platforms which needed
the current arguments to be preserved in the absence of corresponding
config files.

Change-Id: I1e3fb4be8176fc173959e72442396dd33a99a316
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: David Cunado <david.cunado@arm.com>

qemu: Support SEPARATE_CODE_AND_RODATA

qemu: Accessing UART1 causes a data abort

Create hikey960_bl_common.c to store duplication initialization
code in both BL1 and BL2.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

It's unnecessary to call platform driver initialization in image
load driver. We could make bl2_platform_setup() to executing
just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC),
replace BL1 by BL2_EL3 in normal boot mode.

When flush images in recovery mode, keep to use BL1.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop
LOAD_IMAGE v1 to simplify code.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in
DRAM, it's overlapped with MAP_DDR.

Since TSP_MEM is always configured in DRAM case, it means
MAP_OPTEE_PAGEABLE is always disabled. Just remove it.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

The main difference between HiKey960 v1 hardware and HiKey960 v2
hardware is on UART console.

But the function of detecting boardid dumps message before console
ready. So fix it by removing those messages.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>