GitLab

remove plat_sip_svc.c and plat_psci.c in stratix 10 platform directory
as both has been refactored to common directory for sharing with agilex
platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I395fed66408f536e8fefd637681e742c63621818

This is not conforming C and does not compile with -fno-common.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I6535954cc567d6efa06919069b91e3f50975b073

This was found by compiling with -fno-common:

./build/picopi/release/bl2/imx_snvs.o:(.bss.__packed+0x0): multiple definition of `__packed';
./build/picopi/release/bl2/imx_caam.o:(.bss.__packed+0x0): first defined here

__packed was intended to be the attribute macro from cdefs.h, not an
object of the structure type.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id02fac3f098be2d71c35c6b4a18012515532f32a

This patch adds macros, to define registers required to support GPU
reset, for Tegra194 SoCs.

Change-Id: Ifa7e0161b9e8de695a33856193f500b847a03526
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

This patch fixes the logic to check if the previous bootloader has
disabled access to the TZDRAM configuration registers. The polarity
for the bit was incorrect in the previous check.

Change-Id: I7a0ba4f7b1714997508ece904c0261ca2c901a03
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch introduces the 'plat_enable_console' handler to allow
the platform to enable the right console. Tegra194 platform supports
multiple console, while all the previous platforms support only one
console.

For Tegra194 platforms, the previous bootloader checks the platform
config and sets the uart-id boot parameter, to 0xFE. On seeing this
boot parameter, the platform port uses the proper memory aperture
base address to communicate with the SPE. This functionality is
currently protected by a platform macro, ENABLE_CONSOLE_SPE.

Change-Id: I3972aa376d66bd10d868495f561dc08fe32fcb10
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch introduces a header file for the spe-console driver. This
file currently provides a device struct and a registration function
call for clients.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ic65c056f5bd60871d8a3f44f2c1210035f878799

This patch updates the header, t194_nvg.h, to v6.4. This
gets it in synch with MTS pre-release 2 - cl39748439.

Change-Id: I1093c9f5dea7b7f230b3267c90b54b7f3005ecd7
Signed-off-by: Steven Kao <skao@nvidia.com>

"Strict checking" is a mode where secure world can access
secure-only areas unlike legacy mode where secure world could
access non-secure spaces as well. Secure-only areas are defined
as the TZ-DRAM carveout and any GSC with the CPU_SECURE bit set.
This mode not only helps prevent issues with IO-Coherency but aids
with security as well.

This patch implements the programming sequence required to enable
strict checking mode for Tegra194 SoCs.

Change-Id: Ic2e594f79ec7c5bc1339b509e67c4c62efb9d0c0
Signed-off-by: Dilan Lee <dilee@nvidia.com>

This patch enables the CC6 cluster state for the cluster, if the
current CPU being offlined is the last CPU in the cluster.

Change-Id: I3380a969b534fcd14f9c46433471cc1c2adf6011
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch includes the console driver from individual platform
makefile, to allow future platforms to include consoles of their
choice.

Change-Id: I4c92199717da410c8b5e8d45af67f4345f743dbd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch provides the platform with flexibility to perform custom
steps during TZDRAM setup. Tegra194 platforms checks if the config
registers are locked and TZDRAM setup has already been done by the
previous bootloaders, before setting up the fence.

Change-Id: Ifee7077d4b46a7031c4568934c63e361c53a12e3
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch enables IO coherency for SE clients, SEWR and SERD,
by overriding their platform settings to "normal_coherent".
This setting also converts read/write requests from these SE
clients to Normal type.

Change-Id: I31ad195ad30ecc9ee785e5e84184cda2eea5c45a
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Shravani Dingari <shravanid@nvidia.com>
Signed-off-by: Jeff Tsai <jefft@nvidia.com>

This patch adds support to save the system suspend entry and exit
markers to TZDRAM to help the trampoline code decide if the current
warmboot is actually an exit from System Suspend.

The Tegra194 platform handler sets the system suspend entry marker
before entering SC7 state and the trampoline flips the state back to
system resume, on exiting SC7.

Change-Id: I29d73f1693c89ebc8d19d7abb1df1e460eb5558e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to get the SMMU context's offset
and uses another helper function to get the CPU trampoline offset.
These helper functions are used by the System Suspend entry sequence
to save the SMMU context and CPU reset handler to TZDRAM.

Change-Id: I95e2862fe37ccad00fa48ec165c6e4024df01147
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch cleans up all references to the Tegra186 family of SoCs.

Change-Id: Ife892caba5f2523debacedf8ec465289def9afd0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The MCE driver checks the NVG interface version during boot and
disaplys the hardware and software versions on the console. The
software version is being displayed as zero.

This patch updates the prints to use the real NVG header version
instead.

Change-Id: I8e9d2e6c43a59a8a6d5ca7aa8153b940fce86709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch does the following:
- cstate_info variable is used to pass on requested cstate to mce
- Currently, cg_cstate is encoded using 2 bits(bits 8, 9) in cstate_info
- cg_cstate values can range from 0 to 7, with 7 representing cg7
- Thus, cg_cstate is to be encoded using 3 bits (val: 0-7)
- Fix this, as per ISS and ensure bits 8, 9, 10 are used

Change-Id: Idff207e2a88b2f4654e4a956c27054bf5e8f69bb
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch adds the driver, to implement the programming sequence to
save/restore hardware context, during System Suspend/Resume.

Change-Id: If851a81cd4e699b58a0055d0be7f145759792ee9
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Jeff Tsai <jefft@nvidia.com>

This patch renames all the secure scratch registers to reflect
their usage.

This is a list of all the macros being renamed:

- SECURE_SCRATCH_RSV44_* -> SCRATCH_BOOT_PARAMS_ADDR_*
- SECURE_SCRATCH_RSV97 -> SCRATCH_SECURE_BOOTP_FCFG
- SECURE_SCRATCH_RSV99_* -> SCRATCH_SMMU_TABLE_ADDR_*
- SECURE_SCRATCH_RSV109_* -> SCRATCH_RESET_VECTOR_*

Change-Id: I838ece3da39bc4be8f349782e99bac777755fa39
Signed-off-by: Steven Kao <skao@nvidia.com>

Rule 8.4, A compatible declaration shall be visible when an object
  or function with external linkage is defined.

Add function delaration to the header file.
Add suffix U to the unsigned constant define.

Change-Id: I54eba913a5fa38e4fdf3655931dc421d9510c691
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch cleans up the mce driver files to remove all the unsupported
functionality. The MCE/NVG interface is not restricted to the EL3 space,
so clients can issue commands to the MCE firmware directly.

Change-Id: Idcebc42f31805f9c1abe1c1edc17850151aca11d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sanity checks the target cluster value, during core power on,
by comparing it against the maximum number of clusters supported by the
platform.

Reported by: Rohit Khanna <rokhanna@nvidia.com>

Change-Id: I556ce17a58271cc119c86fae0a4d34267f08b338
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

Fix invalid use of function pointer [Rule 1.3]

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

convert object type to match the type of function parameters
[Rule 10.3]

Force operands of an operator to the same type category [Rule 10.4]

Fix implicit widening of composite assignment [Rule 10.6]

Fixed if statement conditional to be essentially boolean [Rule 14.4]

Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]

Voided non c-library functions whose return types are not used
[Rule 17.7]

Change-Id: I65a2b33e59aebb7746bd31544c79d57c3d5678c5
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]

Fix variable essential type doesn't match [Rule 10.3]

Added curly braces ({}) around if/while statements in order to
  make them compound [Rule 15.6]

Voided non c-library functions whose return types are not used
  [Rule 17.7]

Change-Id: Iaae2ecaba3caf1469c44910d4e6aed0661597a51
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

There is a possibility that once we have checked that the GPU is
in reset, some component can get still it out of reset.
This patch removes the check register macro.

Change-Id: Idbbba36f97e37c7db64ab9e42848a040ccd05acd
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds MC registers and macros to allow CPU to access
TZRAM.

Change-Id: I46da526aa760c89714f8898591981bb6cfb29237
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch increases the MAX_MMAP_REGIONS value to 30 from 25 to
allow addition of more MMU mappings.

Change-Id: I5c758c432f5cc77299608e25ba2fd92c3822379d
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch updates t194_nvg.h to v6.1 and does not issue NVG
commands for unsupported platforms.

Change-Id: I506b594a70a3651d01a412ab79b3c8919b1d66f1
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch updates the cache ops to use system registers in
order to trigger cache flush/clean operations.

Change-Id: I888abad22f22b8a33c7193b991fad8c4a78030d0
Signed-off-by: Steven Kao <skao@nvidia.com>

Introduce platform handlers to reprogram the MSS settings.

Change-Id: Ibb9a5457d1bad9ecccea619d69a62bed3bf7d861
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the total number of CPU clusters and number
of cores per cluster, in the platform makefile.

Change-Id: I569ebc1bb794ecab09a1043511b3d936bf450428
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch corrects the TEGRA_CAR_RESET_BASE macro value to
0x20000000 from 0x200000000.

Change-Id: Iba25394ea99237df85395c39059926c5a8b26a84
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds masks for the TZDRAM base/size registers.

Change-Id: I5f688793be8cace28d2aa2d177a295e4faffd666
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

This patch updates the wake mask and wake time to indicate to the
mce/mts that the cpu is powering down. Wake time is set to highest
possible value and wake mask is set to zero.

Change-Id: Ic5abf15e7b98f911def6aa610d300b0668cd287e
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>

T194 XUSB has support for XUSB virtualization. It will have one
physical function (PF) and four Virtual function (VF)

There were below two SIDs for XUSB until T186.
1) #define TEGRA_SID_XUSB_HOST    0x1bU
2) #define TEGRA_SID_XUSB_DEV    0x1cU

We have below four new SIDs added for VF(s)
3) #define TEGRA_SID_XUSB_VF0    0x5dU
4) #define TEGRA_SID_XUSB_VF1    0x5eU
5) #define TEGRA_SID_XUSB_VF2    0x5fU
6) #define TEGRA_SID_XUSB_VF3    0x60U

When virtualization is enabled then we have to disable SID override
and program above SIDs in below newly added SID registers in XUSB
PADCTL MMIO space. These registers are TZ protected and so need to
be done in ATF.
a) #define XUSB_PADCTL_HOST_AXI_STREAMID_PF_0 (0x136cU)
b) #define XUSB_PADCTL_DEV_AXI_STREAMID_PF_0  (0x139cU)
c) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_0 (0x1370U)
d) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_1 (0x1374U)
e) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_2 (0x1378U)
f) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_3 (0x137cU)

This change disables SID override and programs XUSB SIDs in
above registers to support both virtualization and non-virtualization.

Change-Id: I38213a72999e933c44c5392441f91034d3b47a39
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

This patch adds proper checks for the cpu c-stats. It checks both
cpu id and stat id before sending the nvg request to ccplex.

Change-Id: I732957d1e10d6ce6cffb2c6f5963ca614aadd948
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>

Need to use bitwise & instead of condition &&.

Change-Id: I8f70aac95d116188ba972f3d38b02e1d3dd32acb
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

The FPGA configuration is encoded in the high byte of
MISCREG_EMU_REVID. Configs GPU and MAX (encoded as
2 and 3) support the ISO SMMU, while BASE (encoded as 1)
does not. This patch implements this encoding and returns
the proper number of SMMU instances.

Change-Id: I024286b6091120c7602f63065d20ce48bcfd13fe
Signed-off-by: Steven Kao <skao@nvidia.com>

System suspend sequence involves initializing the SMMU
as a part of the system suspend exit, which is currently
not present for Tegra194 platform.

Thus call tegra_smmu_init() as a part of system suspend
exit.

Change-Id: I3086301743019e05a40fd221372e7f8713f286ae
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>