GitLab

This patch adds support for all three SMMU devices present on the SoC.

The following changes have been done:
    Add SMMU devices to the memory map
    Update register read and write functions

Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Define mc sid and txn override regs and sec cfgs.
Create array for mc sid override regs and sec config that is
used to initialize mc.
Add smmu ctx regs array to hold register values during suspend.

Change-Id: I7b265710a9ec2be7dea050058bce65c614772c78
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.

Change-Id: I3c18eb844963f39f91b5ac45e3709f3354bcda0c
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This reverts commit c41df8fda84b9bc56bbb2347fb902f64b1bb557e

Fake system suspend relies on software running on EL3
to trigger a warm reset.

Revert enabling fake system suspend, as the software
running on El3 is not allowed to trigger a warm reset.

Change-Id: I6035f2a7bcb0a4ad50a62c5bc5239226c625ee5e
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

A small set of misc changes to ensure correctness before the v2.2
release tagging.

Change-Id: I888840b9483ea1a1633d204fbbc0f9594072101e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Removed deprecated interfaces that have been removed from the TF-A
project, updated the deprecated list with new deprecations for v2.2
Release, added upcoming release information, remove mentions of PR from
github.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Change-Id: I2b59d351cde9860ad0dcb6520a8bd2827ad403cf

Giving a bit more background information about the issue tracker
and mailing lists.

Change-Id: I68921d54e3113d348f1e16c685f74d32df2ca19f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I53a7706016539e7de7fdbe87b786d99665bbe1d8

The list of upstream platforms on the index page is growing
quite long, especially with all the FVP variants being listed
individually.

This patch leverages the "Platform Ports" chapter in the docs
table of contents to condense this information. Almost all
platform ports now have documentation, so the table of
contents serves as the list of upstream platforms by itself.

For those upstream platforms that do not have corresponding
documentation, the top-level "Platform Ports" page mentions
them individually. It also mentions each Arm FVP, just as
the index page did before.

Note that there is an in-progress patch that creates new
platform port documentation for the Arm Juno and Arm FVP
platforms, so this list of "other platforms" will soon be
reduced further as those platforms become part of the
table of contents as well.

Change-Id: I6b1eab8cba71a599d85a6e22553a34b07f213268
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The index.rst page is now the primary landing page for the TF-A
documentation. It contains quite a lot of content these days,
including:

- The project purpose and general intro
- A list of functionality
- A list of planned functionality
- A list of supported platforms
- "Getting started" links to other documents
- Contact information for raising issues

This patch creates an "About" chapter in the table
of contents and moves some content there. In order,
the above listed content:

- Stayed where it is. This is the right place for it.
- Moved to About->Features
- Moved to About->Features (in subsection)
- Stayed where it is. Moved in a later patch.
- Was expanded in-place
- Moved to About->Contact

Change-Id: I254bb87560fd09140b9e485cf15246892aa45943
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The WARMBOOT_ENABLE_DCACHE_EARLY allows caches to be turned on early during
the boot. But the xlat_change_mem_attributes_ctx() API did not do the required
cache maintenance after the mmap tables are modified if
WARMBOOT_ENABLE_DCACHE_EARLY is enabled. This meant that when the caches are turned
off during power down, the tables in memory are accessed as part of cache
maintenance for power down, and the tables are not correct at this point which
results in a data abort.
This patch removes the optimization within xlat_change_mem_attributes_ctx()
when WARMBOOT_ENABLE_DCACHE_EARLY is enabled.
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I82de3decba87dd13e9856b5f3620a1c8571c8d87

We would need to update this version for the release but, in fact,
it is not required for our publishing workflow; the hosted version
of the docs uses git commit/tag information in place of these
variables anyway.

Instead of updating the version, just remove these variables
entirely.

Change-Id: I424c4e45786e87604e91c7197b7983579afe4806
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

User guide:
1. Remove obsolete note saying only FVP is supported with AArch32
2. Switch compiler for Juno AArch32 to arm-eabi
3. Mention SOFTWARE folder in Juno Linaro release

Index.rst:
1. Switch default FVP model to Version 11.6 Build 45
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ib47a2ea314e2b8394a20189bf91796de0e17de53

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ia03701e2e37e3a00a501b144960a4a65aedbfde9

The version of the Linaro release that is used for testing was
updated in 35010bb8

 and the user guide was updated with the
correct version, however the version is also mentioned on the
index page and that was missed. Update the index page with the
new version.

We can come back and de-duplicate this content later, to ease
future maintenance.

Change-Id: I3fe83d7a1c59ab8d3ce2b18bcc23e16c93f7af97
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Tidying up a few Sphinx warnings that had built-up over time.
None of these are critical but it cleans up the Sphinx output.

At the same time, fixing some spelling errors that were detected.

Change-Id: I38209e235481eed287f8008c6de9dedd6b12ab2e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I497072575231730a216220f84a6d349a48eaf5e3
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>

The readme.rst file in the project root is the front-page that
is displayed on Github and if viewing the TF-A repository on
git.trustedfirmware.org in the "about" view. It now contains a
small amount of stub content, and directs readers to the
ReadTheDocs documentation via trustedfirmware.org/docs/tf-a.

The Github renderer is displaying the content fine but the cgit
viewer displays some "backlink" errors because some content
substitutions were left in place (terms surrounded by pipe
symbols), e.g. |TF-A|.

This patch removes those substitutions, that are not supported
by cgit, and also updates one heading to clarify where to find
the new docs.

Change-Id: I358451df45b8c99975ba0b6db8ea61253a10560d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

* changes:
  doc: Add guide for building the docs locally
  doc: De-duplicate readme and license files
  doc: Convert internal links to RST format

This new page contains instructions for doing a local
build of the documentation, plus information on the environment
setup that needs to be done beforehand.

Change-Id: If563145ab40639cabbe25d0f62759981a33692c6
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The readme.rst and license.rst files in the project root overlap
with the index.rst and license.rst files in the docs/ folder. We
need to use the latter when building the documentation, as Sphinx
requires all included files to be under a common root. However,
the files in the root are currently used by the cgit and Github
viewers.

Using symlinks in Git presents some difficulties so the best
course of action is likely to leave these files but in stub form.

The license.rst file in the root will simply tell the reader to
refer to docs/license.rst.

The readme.rst file will contain a small amount of content that
is derived from the docs/index.rst file, so that the Github main
page will have something valid to show, but it will also contain
a link to the full documentation on ReadTheDocs.

Change-Id: I6dc46f08777e8d7ecb32ca7afc07a28486c9f77a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Currently links between documents are using the format:

<path/to/><filename>.rst

This was required for services like GitHub because they render each
document in isolation - linking to another document is like linking
to any other file, just provide the full path.

However, with the new approach, the .rst files are only the raw
source for the documents. Once the documents have been rendered
the output is now in another format (HTML in our case) and so,
when linking to another document, the link must point to the
rendered version and not the .rst file.

The RST spec provides a few methods for linking between content.
The parent of this patch enabled the automatic creation of anchors
for document titles - we will use these anchors as the targets for
our links. Additional anchors can be added by hand if needed, on
section and sub-section titles, for example.

An example of this new format, for a document with the title
"Firmware Design" is :ref:`Firmware Design`.

One big advantage of this is that anchors are not dependent on
paths. We can then move documents around, even between directories,
without breaking any links between documents. Links will need to be
updated only if the title of a document changes.

Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703
Signed-off-by: Paul Beesley <paul.beesley@arm.com>