- 10 Aug, 2018 1 commit
-
-
Antonio Nino Diaz authored
The translation library is useful elsewhere. Even though this repository doesn't exercise the EL2 support of the library, it is better to have it here as well to make it easier to maintain. enable_mmu_secure() and enable_mmu_direct() have been deprecated. The functions are still present, but they are behind ERROR_DEPRECATED and they call the new functions enable_mmu_svc_mon() and enable_mmu_direct_svc_mon(). Change-Id: I13ad10cd048d9cc2d55e0fff9a5133671b67dcba Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 03 Aug, 2018 6 commits
-
-
Nariman Poushin authored
Add support for System Guidance for Mobile platform SGM775 Change-Id: I2442a50caae8f597e5e5949cd48f695cf75d9653 Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
-
Deepak Pandey authored
In css platforms where the cpu/cluster management is done by the hardware, software does need to issue certain scmi requests. This patch wraps those scmi calls around the HW_ASSISTED_COHERENCY build option to remove them on platforms that have this hardware support. Change-Id: Ie818e234484ef18549aa7f977aef5c3f0fc26c27 Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
-
Nariman Poushin authored
This omission causes a build error as the definition for arm_tzc_regions_info_t is needed from plat_arm.h Change-Id: I26935ee90d3e36ab6a016ff2c4eee4413df3e4e8 Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
-
Nariman Poushin authored
Change-Id: I278d6876508800abff7aa2480910306a24de5378 Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
-
Chandni Cherukuri authored
The Arm SGI platforms can switch to using SCMI. So enable support for SCMI and remove portions of code that would be unused after switching to SCMI. Change-Id: Ifd9e1c944745f703da5f970b5daf1be2b07ed14e Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
-
Chandni Cherukuri authored
On SGI platforms, the 'CORE_PWRDN_EN' bit of 'CPUPWRCTLR_EL1' register requires an explicit write to clear it for hotplug and idle to function correctly. The reset value of this bit is zero but it still requires this explicit clear to zero. This indicates that this could be a model related issue but for now this issue can be fixed be clearing the CORE_PWRDN_EN in the platform specific reset handler function. Change-Id: I4222930daa9a3abacdace6b7c3f4a5472ac0cb19 Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
-
- 01 Aug, 2018 1 commit
-
-
Daniel Boulby authored
TF won't build since no memory region is specified for when SEPARATE_CODE_AND_RODATA=0 it still relies on the ARM_MAP_BL_RO_DATA region which is never defined for this case. Create memory region combining code and RO data for when the build flag SEPARATE_CODE_AND_RODATA=0 to fix this Change-Id: I6c129eb0833497710cce55e76b8908ce03e0a638 Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
-
- 30 Jul, 2018 1 commit
-
-
Antonio Nino Diaz authored
Fix defects of MISRA C-2012 rules 8.13, 10.1, 10.3, 10.4, 10.8, 11.6, 14.4, 15.7, 17.8, 20.10, 20.12, 21.1 and Directive 4.9. Change-Id: I7ff61e71733908596dbafe2e99d99b4fce9765bd Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 27 Jul, 2018 1 commit
-
-
Kaihua Zhong authored
GPIO_089 connects to PCIE_PERST_N. It needs to be configured as output low. Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com> Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
-
- 26 Jul, 2018 8 commits
-
-
Andrew F. Davis authored
We can enter and exit coherency without any software operations, but HW_ASSISTED_COHERENCY has stronger implications that are causing issues. Until these can be resolved, only use the weaker WARMBOOT_ENABLE_DCACHE_EARLY flag. Signed-off-by: Andrew F. Davis <afd@ti.com>
-
Sughosh Ganu authored
Add the various flags that are required to build the components needed to enable the RAS feature on SGI575 platform. By default, all flags are set to 0, disabling building of all corresponding components. Change-Id: I7f8536fba895043ef6e397cc33ac9126cb572132 Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
Add platform specific changes needed to add support for the RAS feature on SGI575 platform, including adding a mapping for the CPER buffer being used on SGI575 platform. Change-Id: I01a982e283609b5c48661307906346fa2738a43b Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
Add a platform specific handler for RAS interrupts and configure the platform RAS interrupts for EL3 handling. The interrupt handler passes control to StandaloneMM code executing in S-EL0, which populates the CPER buffer with relevant error information. The handler subsequently invokes the SDEI client which processes the information in the error information in the CPER buffer. The helper functions plat_sgi_get_ras_ev_map and plat_sgi_get_ras_ev_map_size would be defined for sgi platforms in the subsequent patch, which adds sgi575 specific RAS changes. Change-Id: I490f16c15d9917ac40bdc0441659b92380108d63 Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
The secure partition manager reserves chunks of memory which are used for the S-EL0 StandaloneMM image and the buffers required for communication between the Non-Secure world with the StandaloneMM image. Add the memory chunks to relevant arrays for mapping the regions of memory with corresponding attributes. Change-Id: If371d1afee0a50ca7cacd55e16aeaca949d5062b Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
The SGI platforms need to allocate memory for CPER buffers. These platform buffers would be placed between the shared reserved memory and the per cpu stack memory, thus the need to redefine stack base pointer for these platforms. This patch allows each board in ARM platform to define the PLAT_SP_IMAGE_STACK_BASE. Change-Id: Ib5465448b860ab7ab0f645f7cb278a67acce7be9 Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
Include arm_spm_def.h in the platform_def.h file. Without this inclusion, we get build errors like In file included from services/std_svc/spm/sp_setup.c:12:0: services/std_svc/spm/sp_setup.c: In function 'spm_sp_setup': services/std_svc/spm/sp_setup.c:61:57: error: 'PLAT_SPM_BUF_BASE' undeclared (first use in this function) write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, PLAT_SPM_BUF_BASE); Now that the platform_def.h includes arm_spm_def.h, remove inclusion of platform_def.h in arm_spm_def.h to remove the circular dependency. Change-Id: I5225c8ca33fd8d288849524395e436c3d56daf17 Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
Sughosh Ganu authored
The board_arm_def.h header file needs to be included via the platform definition header. Not doing so, results in a redefinition error of PLAT_ARM_MAX_BL31_SIZE macro, if defined in the platform definition file. Change-Id: I1d178f6e8a6a41461e7fbcab9f6813a2faa2d82b Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
-
- 24 Jul, 2018 13 commits
-
-
Yann Gautier authored
platform.mk is updated to have compilation rules for DTB, stm32image tool, and the concatenation of the 3 binaries. A new linker script and an assembly file are added to manage this. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
The DDR driver is under dual license, BSD and GPLv2. The configuration parameters are taken from device tree. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
If a PMIC companion chip is present on board, it has to be configured for regulators supplies. This check is done with board DT configuration. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Pascal Paillet <p.paillet@st.com>
-
Yann Gautier authored
Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
This will be used by BL33 to get boot device and instance. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
The management of pinctrl nodes of device tree is also added. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
The clock driver is under dual license, BSD and GPLv2. The clock driver uses device tree, so a minimal support for this is added. The required files for driver and DTS files are in include/dt-bindings/. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
-
Yann Gautier authored
STM32MP1 is a microprocessor designed by STMicroelectronics, based on a dual Arm Cortex-A7. It is an Armv7-A platform, using dedicated code from TF-A. STM32MP1 uses BL2 compiled with BL2_AT_EL3. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Pascal Paillet <p.paillet@st.com>
-
Daniel Boulby authored
Change arm_setup_page_tables() to take a variable number of memory regions. Remove coherent memory region from BL1, BL2 and BL2U as their coherent memory region doesn't contain anything and therefore has a size of 0. Add check to ensure this doesn't change without us knowing. Change-Id: I790054e3b20b056dda1043a4a67bd7ac2d6a3bc0 Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
-
Sumit Garg authored
OP-TEE loading is optional on Developerbox controlled via SCP firmware. To check if OP-TEE is loaded or not, we use DRAM1 region info passed by SCP firmware. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
-
Jeenu Viswambharan authored
This also gets rid of MISRA violations for Rule 8.3 and 8.4. Change-Id: I45bba011b16f90953dd4b260fcd58381f978eedc Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Antonio Nino Diaz authored
Fix violations of MISRA C-2012 Rules 10.1, 10.3, 13.3, 14.4, 17.7 and 17.8. Change-Id: I6c9725e428b5752f1d80684ec29cb6c52a5c0c2d Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 22 Jul, 2018 1 commit
-
-
Haojian Zhuang authored
BL1 is used in recovery mode on HiKey. The TBB implementation on HiKey is in BL2. It means that user need to build ATF BL2 with TBB and ATF BL1 with non-TBB. It's inconvenient. So include TBB in BL1, too. Signed-off-by: Teddy Reed <teddy@prosauce.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
-
- 20 Jul, 2018 1 commit
-
-
Antonio Nino Diaz authored
Also change header guards to fix defects of MISRA C-2012 Rule 21.1. Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57 Acked-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 19 Jul, 2018 3 commits
-
-
Jeenu Viswambharan authored
External Aborts while executing in EL3 is fatal in nature. This patch allows for the platform to define a handler for External Aborts received while executing in EL3. A default implementation is added which falls back to platform unhandled exception. Change-Id: I466f2c8113a33870f2c7d2d8f2bf20437d9fd354 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
Double fault is when the PE receives another error whilst one is being handled. To detect double fault condition, a per-CPU flag is introduced to track the status of error handling. The flag is checked/modified while temporarily masking external aborts on the PE. This patch routes double faults to a separate platform-defined handler. Change-Id: I70e9b7ba4c817273c55a0af978d9755ff32cc702 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
Uncontainable errors are the most severe form of errors, which typically mean that the system state can't be trusted any more. This further means that normal error recovery process can't be followed, and an orderly shutdown of the system is often desirable. This patch allows for the platform to define a handler for Uncontainable errors received. Due to the nature of Uncontainable error, the handler is expected to initiate an orderly shutdown of the system, and therefore is not expected to return. A default implementation is added which falls back to platform unhandled exception. Also fix ras_arch.h header guards. Change-Id: I072e336a391a0b382e77e627eb9e40729d488b55 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
- 18 Jul, 2018 3 commits
-
-
Konstantin Porotchkin authored
Add support for A8K platform boards Change-Id: Ife025d930d2ab6cabbc13bbe19b2273cc1c938c8 Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
-
Konstantin Porotchkin authored
Add common Marvell ARMADA platform components. This patch also includes common components for Marvell ARMADA 8K platforms. Change-Id: I42192fdc6525a42e46b3ac2ad63c83db9bcbfeaf Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
-
Antonio Nino Diaz authored
Define the values as unsigned int or unsigned long long based on the actual size of the register. This prevents subtle issues caused by having a type that is too small. For example: #define OPTION_ENABLE 0x3 #define OPTION_SHIFT 32 uint64_t mask = OPTION_ENABLE << OPTION_SHIFT; Because OPTION_ENABLE fits in an int, the value is considered an int. This means that, after shifting it 32 places to the left, the final result is 0. The correct way to define the values is: #define OPTION_ENABLE ULL(0x3) #define OPTION_SHIFT U(32) In this case, the compiler is forced to use a 64 bit value from the start, so shifting it 32 places to the left results in the expected value. Change-Id: Ieaf2ffc2d8caa48c622db011f2aef549e713e019 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 16 Jul, 2018 1 commit
-
-
Antonio Nino Diaz authored
The Non-secure DRAM region shouldn't be protected in the range specified in the Linux command line with memmap. This change also increases the size of the Secure DRAM region. Change-Id: I306e9e443a84b834c99739f54a534a3ca3be2424 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-