GitLab

Pass DTB containing DRAM layout from BL2 to BL33 via register x3, so
that the BL33 can simply consume it and get accurate DRAM layout info.
BL33 is in most usecases U-Boot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Use array of start-size tuples for the DRAM banks and call single
function which iterates over this array to report the DRAM info.
This is in preparation for expanding this to generate FDT for the
next stage.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Print the DRAM configuration only after the DRAM was initialized. This
will be useful when deduplicating code populating FDT passed to U-Boot,
since it will contain the same macros as bl2_advertise_dram_size().
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Make the DRAM configuration debug print consistent for all supported SoCs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

There is nothing preventing H3 older than v3.0 from printing the
DRAM configuration, just like v3.0 and newer. Drop the check and
let all H3 revisions print DRAM configuration in BL2.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

RCAR_DRAM_DDR3L_MEMCONF = 2 means E3 with 1GBx4 memory configuration.
Add debug print for this configuration for completeness sake.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Just move the DRAM layout information into separate function,
no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

tzc380: Fix some asserts

This driver can be compiled in release builds, but GCC generates warnings
for some comparisons and that prevents the firmware from being built in
debug builds.

Change-Id: Ic52e1b4a11896ecf086864fbe2b5bfc143ec9b1b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add NXP i.MX8MQ basic support 

i.MX8MQ is new SOC of NXP's i.MX8M family based on
A53. It can provide industry-leading audio, voice
and video processing for applications that scale
from consumer home audio to industrial building
automation and mobile computers

this patchset add the basic supoort to boot up
the 4 X A53. more feature will be added later.
Signed-off-by: Bai Ping <ping.bai@nxp.com>

hikey960: initialize EDMAC and channels

plat/arm/sgi: Use platform specific functions to get platform ids

Update code with latest changes from Marvell LSP 18.12

Sync the platform code version with current Marvell LSP.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Very rarely, during cpuidle operations the following error
is seen: "PM MSG Trigger Timeout".
This is caused by slow handling of message interrutps
in the PM FW running on CM3 (under heavy PM operation load).

This is not a real issue, so we extend the timeout to
avoid the error prints.

Change-Id: I92fd6f2ff1ddf208b216c123880ded28a00b6e0e
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/59670

Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>

Add static configuration for SFI+ 10Gbps interface on SERDES
Lane 4.
This is just a copy of Lane 2 static values, not optimized.
Board-to-board iperf test shows up to 6Gbps transfer speed.

Change-Id: I024d2ac132f7fa6c342a64367f3dca2123a27e97
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>

Add description for memory layouts used by EspressoBin v7 (DDR4)

Change-Id: I199d8b52580b26e560f14b503a6e99d32de4f284
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/61279

Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>

- Number of open power switches for CPUs should be three
  and now two.

- This patch updates the value of open power switches from
  0xfd (two power-switches) to 0xfc (three power-switches).

Change-Id: I2783ab7f04bbbb6da78eeedcabe4636f9a774512
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Add support for SVC test builds for tuning AVS values.
Update the SVC procedure and add EEPROM access.
Add support for AP807 AVS values (10 bits wide).
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

- Update CPU frequency on AP807 to 2GHz for SAR 0x0.
- Increase AVS to 0.88V for 2GHz clock

Change-Id: Ic945b682ab2f8543e34294bfc56c3eae2c5e0c8e
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

In Armada 8K DB boards, PCIe initialization can be executed only once
because PCIe reset performed during chip power on and it cannot be
executed via GPIO later.
This means that power on can be executed only once, when it's called
from the bootloader.
Power on:
	Read bit 21 of the mode, it marks if the caller is
	the bootloader or the Linux Kernel.
Power off:
	Check if the comphy was already configured to PCIe, if yes,
	check if the caller is bootloader, if both conditions are true
	(PCIe mode and called by Linux) - skip the power-off.

In addition, fix incorrect documentation describing mode fields -
PCIe width is 3 bits, not 2.

NOTE: with this patch, please use LK4.14.76 (LK4.4.120 may not work
with it).

Change-Id: I4b929011f97a0a1869a51ba378687e78b3eca4ff
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Do not power off the CPU1 since there is no way to wake it up
(wake-up is causing CPU0 reset as well duo to HW bug). Quote from errata
Ref #13 [In power saving mode, both cores must be powered off]:
"When Core 0 is on and Core 1 is in power-off state, a Core 1
wake-up resets Core 0 as well and puts Core 0 back to ROM".

To overcome described HW bug instead of powering the CPU off, let it
reach WFI instruction, which is invoked by generic psci_do_cpu_off
function after platform handler finishes. This will put the core in low
power state and give a chance to wake it up.

Before this change, after running secondary kernel via kexec, only one
core was up, now both cores are up.

Change-Id: I87f144867550728055d9b8a2edb84a14539acab7
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Extended phy selector configuration about XFI1 mode.

Change-Id: I1309770bbb5fdbfb0127b6f12ee78974d1d6b19f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Add tzc380 support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bai Ping <ping.bai@nxp.com>

Add support to implement multi-threaded platforms for SGI

Add two new functions 'plat_arm_sgi_get_platform_id' and
'plat_arm_sgi_get_config_id' which will be implemented by all the
SGI platforms. These functions can be used to determine the part
number and configuration id of the SGI platforms.

In BL2, these functions are used to populate the 'system-id' node.
In BL31, these functions are used to populate the 'sgi_plat_info_t'
structure with the part number and configuration id of the platform.

Change-Id: I3bacda933527724a3b4074ad4ed5b53a81ea4689
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

remove weak implemention of 'plat_arm_psci_override_pm_ops'

This is needed to utilize the DMA controller on the hikey960
Signed-off-by: Ryan Grachek <ryan@edited.us>

Initial Spectre V1 mitigations (CVE-2017-5753).

Rm emmc delay

ccn: Introduce API to set and read value of node register

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.

For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.

Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

EHF and RAS documentation

romlib: Add juno support for romlib

romlib: Allow patching of romlib functions

For platforms with multi-threaded CPUs, the number of power domains
supported would be more than the value currently defined by
PLAT_MAX_PWR_LVL. So move the PLAT_MAX_PWR_LVL macro to platform
specific code and let the platform define the number of power domain
levels.

Change-Id: I21c0682e62b397860b2999031a0c9c5ce0d28eed
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

To support platforms which are based on multi-threaded CPUs, override
the weak implementation of plat_arm_get_cpu_pe_count function to return
the number of threads supported by the CPU used in the platform.

Change-Id: Ia680773f1277b17e2d3d2414d87943dcece33e89
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

For platforms using multi-threaded CPUs, there can be upto four
platform power domain levels. At present, there are three platform
power domain levels that are defined for the CSS platforms. Define a
fourth level 'ARM_PWR_LVL3' as well to provide support for an
additional platform power domain level.

Change-Id: I40cc17a10f4690a560776f504364fd7277a7e72a
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

The CSS_SYSTEM_PWR_DMN_LVL macro that defines the system power domain
level is fixed at ARM_PWR_LVL2 for all CSS platforms. However, the
system power domain level can be different for CSS platforms that
use multi-threaded CPUs.

So, in preparation towards adding support for platforms that use
multi-threaded CPUs, refactor the definition of CSS_SYSTEM_PWR_DMN_LVL
such that CSS_SYSTEM_PWR_DMN_LVL is uniquely defined for each of the
CSS platform.

Change-Id: Ia837b13f6865e71da01780993c048b45b7f36d85
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>