Skip to content

GitLab

Switch branch/tag
  1. 06 Dec, 2017 1 commit
    • Leo Yan's avatar
      Hikey960: Change to use recommended power state id format · fdae60b6
      Leo Yan authored 
      

ARM Power State Coordination Interface (ARM DEN 0022D) chapter
6.5 "Recommended StateID Encoding" defines the state ID which can be
used by platforms. The recommended power states can be presented by
below values; and it divides into three fields, every field has 4 bits
to present power states corresponding to core level, cluster level and
system level.

  0: Run
  1: Standby
  2: Retention
  3: Powerdown

This commit changes to use upper recommended power states definition on
Hikey960; and changes the power state validate function to check the
power state passed from kernel side.
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      fdae60b6
  3. 30 Nov, 2017 1 commit
    • David Cunado's avatar
      Do not enable SVE on pre-v8.2 platforms · 3872fc2d
      David Cunado authored 
      

Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.

This has a minor performance improvement with no functional
impact.

Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      3872fc2d
  5. 01 Nov, 2017 1 commit
  7. 18 Oct, 2017 2 commits
  9. 17 Oct, 2017 1 commit
  11. 13 Sep, 2017 2 commits
  13. 07 Sep, 2017 1 commit
    • Leo Yan's avatar
      Hikey: enable CPU debug module · e246617b
      Leo Yan authored 
      

Every CPU has its own debug module and this module is used by JTAG
debugging and coresight tracing. If without enabling it, it's easily to
introduce lockup issue when we enable debugging features.

This patch is to enable CPU debug module when power on CPU; this allows
connecting to all cores through JTAG and used by kernel coresight
driver.
Signed-off-by: default avatarMatthias Welwarsky <maw@sysgo.com>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      e246617b
  15. 01 Sep, 2017 2 commits
  17. 29 Aug, 2017 2 commits
    • Eleanor Bonnici's avatar
      HiKey: Rename CPUACTRL reg constants · f9a856ba
      Eleanor Bonnici authored 
      

Constants named as *ACTLR* refer in fact to the CPUACTRL_EL1 register.
Since ACTLR and ACTRL_EL1 are different registers this patch renames
these constants for clarity.

Change-Id: I2a9e402dab7b0fcb6e481ee0d8a11eda943ed299
Signed-off-by: default avatarEleanor Bonnici <Eleanor.bonnici@arm.com>
      f9a856ba
    • Leo Yan's avatar
      Hikey: enable watchdog reset · 3506ff11
      Leo Yan authored 
      

At the system boot time we need enable watchdog reset, otherwise after
the watchdog is timeout it cannot reset the SoC. We need set the bit 0
and bit 16 together, the bit 16 is mask bit so after set bit 16 we have
permission to operate bit 0 and bit 0 is watchdog reset enabling bit.
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      3506ff11
  19. 17 Aug, 2017 1 commit
    • Tao Wang's avatar
      Hikey960: fix PSCI suspend stuck issue · 4af7fcb8
      Tao Wang authored 
      

Clear the cpuidle flag when resuming from idle. This flag is set
when entering idle, and if it remains set when resuming, it can
prevent the cluster from powering off during the next system
suspend operation. During system suspend, all CPUs are plugged
out except the last CPU, which is suspended. If any of the
cpuidle flags are set at this point, the last CPU will be stuck
in a WFI loop and will not be powered off.
This problem only occurs during system suspend.
Signed-off-by: default avatarTao Wang <kevin.wangtao@linaro.org>
      4af7fcb8
  21. 15 Aug, 2017 1 commit
    • Julius Werner's avatar
      Add new alignment parameter to func assembler macro · 64726e6d
      Julius Werner authored 
      

Assembler programmers are used to being able to define functions with a
specific aligment with a pattern like this:

    .align X
  myfunction:

However, this pattern is subtly broken when instead of a direct label
like 'myfunction:', you use the 'func myfunction' macro that's standard
in Trusted Firmware. Since the func macro declares a new section for the
function, the .align directive written above it actually applies to the
*previous* section in the assembly file, and the function it was
supposed to apply to is linked with default alignment.

An extreme case can be seen in Rockchip's plat_helpers.S which contains
this code:

  [...]
  endfunc plat_crash_console_putc

  .align 16
  func platform_cpu_warmboot
  [...]

This assembles into the following plat_helpers.o:

  Sections:
  Idx Name                             Size  [...]  Algn
   9 .text.plat_crash_console_putc 00010000  [...]  2**16
  10 .text.platform_cpu_warmboot   00000080  [...]  2**3

As can be seen, the *previous* function actually got the alignment
constraint, and it is also 64KB big even though it contains only two
instructions, because the .align directive at the end of its section
forces the assembler to insert a giant sled of NOPs. The function we
actually wanted to align has the default constraint. This code only
works at all because the linker just happens to put the two functions
right behind each other when linking the final image, and since the end
of plat_crash_console_putc is aligned the start of platform_cpu_warmboot
will also be. But it still wastes almost 64KB of image space
unnecessarily, and it will break under certain circumstances (e.g. if
the plat_crash_console_putc function becomes unused and its section gets
garbage-collected out).

There's no real way to fix this with the existing func macro. Code like

 func myfunc
 .align X

happens to do the right thing, but is still not really correct code
(because the function label is inserted before the .align directive, so
the assembler is technically allowed to insert padding at the beginning
of the function which would then get executed as instructions if the
function was called). Therefore, this patch adds a new parameter with a
default value to the func macro that allows overriding its alignment.

Also fix up all existing instances of this dangerous antipattern.

Change-Id: I5696a07e2fde896f21e0e83644c95b7b6ac79a10
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      64726e6d
  23. 26 Jul, 2017 1 commit
    • Leo Yan's avatar
      hikey: Disable VBUS_DET interrupt for PMIC · c9e8774c
      Leo Yan authored 
      

After disconnect Jumper pin 1-2 in J15 header, the signal VBUS_DET is to
be pulled down to low level. This will assert the interrupt signal in
PMIC and trigger IRQ in GIC; the asserted signal from VBUS_DET is level
triggered and kernel reports the warning for unhooked interrupt handling;
and VBUS_DET stays with low level, this triggers IRQ storm in kernel.

This patch is to disable interrupt for VBUS_DET in PMIC, this can
dismiss the verbose log and IRQ storm after kernel booting.

[   40.835279] irq 57: nobody cared (try booting with the "irqpoll" option)
[   40.842075] CPU: 0 PID: 980 Comm: irq/57-hi655x-p Not tainted 4.4.77-568944-g576a0114dec8-dirty #667
[   40.851303] Hardware name: HiKey Development Board (DT)
[   40.856580] Call trace:
[   40.859060] [<ffffff800808c4cc>] dump_backtrace+0x0/0x1e0
[   40.864516] [<ffffff800808c8ac>] show_stack+0x20/0x28
[   40.869622] [<ffffff80084b9688>] dump_stack+0xa8/0xe0
[   40.874729] [<ffffff800812dd5c>] __report_bad_irq+0x40/0xec
[   40.880360] [<ffffff800812e0bc>] note_interrupt+0x1e4/0x2d8
[   40.885992] [<ffffff800812b11c>] handle_irq_event_percpu+0xd8/0x268
[   40.892324] [<ffffff800812b2f8>] handle_irq_event+0x4c/0x7c
[   40.897955] [<ffffff800812ecbc>] handle_level_irq+0xcc/0x178
[   40.903672] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[   40.909481] [<ffffff80085074c8>] pl061_irq_handler+0xa8/0x124
[   40.915286] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[   40.921092] [<ffffff800812a820>] __handle_domain_irq+0x90/0xf8
[   40.926985] [<ffffff8008082620>] gic_handle_irq+0x58/0xa8
Signed-off-by: default avatarDmitry Shmidt <dimitrysh@google.com>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      c9e8774c
  25. 14 Jul, 2017 2 commits
    • Jorge Ramirez-Ortiz's avatar
      Poplar: Initial commit for Poplar E-96Boards · e35d0edb
      Jorge Ramirez-Ortiz authored 
      The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.

SOC  Hisilicon Hi3798CV200
CPU  Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB  Two USB 2.0 ports One USB 3.0 ports
CONSOLE  USB-micro port for console support
ETHERNET  1 GBe Ethernet
PCIE  One PCIe 2.0 interfaces
JTAG  8-Pin JTAG
EXPANSION INTERFACE  Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI  802.11AC 2*2 with Bluetooth
CONNECTORS  One connector for Smart Card One connector for TSI

The platform boot sequence is as follows:
    l-loader --> arm_trusted_firmware --> u-boot

Repositories:
 - https://github.com/Linaro/poplar-l-loader.git
 - https://github.com/Linaro/poplar-u-boot.git



U-Boot is also upstream in the project's master branch.

Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).

Build Line:
make CROSS_COMPILE=aarch64-linux-gnu-  all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin
Signed-off-by: default avatarJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Tested-by: default avatarJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: default avatarLeo Yan <leo.yan@linaro.org>
Tested-by: default avatarAlex Elder <elder@linaro.org>
      e35d0edb
    • Isla Mitchell's avatar
      Fix order of remaining platform #includes · ee1ebbd1
      Isla Mitchell authored 
      

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.

Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: default avatarIsla Mitchell <isla.mitchell@arm.com>
      ee1ebbd1
  27. 12 Jul, 2017 5 commits
  29. 11 Jul, 2017 1 commit
  31. 10 Jul, 2017 1 commit
  33. 20 Jun, 2017 1 commit
  35. 19 Jun, 2017 1 commit
    • Leo Yan's avatar
      plat: Hikey960: fix the CPU hotplug · 0aedca71
      Leo Yan authored 
      

In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.

This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: default avatarTao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      0aedca71
  37. 15 Jun, 2017 1 commit
  39. 14 Jun, 2017 1 commit
  41. 13 Jun, 2017 1 commit
  43. 07 Jun, 2017 4 commits
  45. 31 May, 2017 4 commits
  47. 24 May, 2017 2 commits