GitLab

Some STM32MP1‐based boards, like Seeed Studio’s SoM‐STM32MP157C, have
the SoC connected to the PMIC via I2C2 instead of I2C4 (which is used on
the official ST development boards). This commit brings TF‑A one step
closer to boot on such boards.

The pins used, PH4 and PH5, are described in a new pinctrl node named
“i2c2-0”, AKA phandle “i2c2_pins_a”. These names are identical to their
Linux kernel counterparts (commit
7af08140979a6e7e12b78c93b8625c8d25b084e2).
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Change-Id: Ief6f0a632cfa992dcf3fed95d266ad6a07a96fe0

Some STM32MP1‐based boards, like Seeed Studio’s SoM‐STM32MP157C, have
the SoC connected to the PMIC via I2C2 instead of I2C4 (which is used on
the official ST development boards). This commit brings TF‑A one step
closer to boot on such boards.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Change-Id: Iec9c80f29ce95496e8f1b079b7a23f1914b74901

* changes:
  allwinner: H616: Add reserved-memory node to DT
  allwinner: Add Allwinner H616 SoC support
  allwinner: Add H616 SoC ID
  allwinner: Express memmap more dynamically
  allwinner: Move sunxi_cpu_power_off_self() into platforms
  allwinner: Move SEPARATE_NOBITS_REGION to platforms
  doc: allwinner: Reorder sections, document memory mapping

* changes:
  plat/sgi: allow usage of secure partions on rdn2 platform
  board/rdv1mc: initialize tzc400 controllers
  plat/sgi: allow access to TZC controller on all chips
  plat/sgi: define memory regions for multi-chip platforms
  plat/sgi: allow access to nor2 flash and system registers from s-el0
  plat/sgi: define default list of memory regions for dmc620 tzc
  plat/sgi: improve macros defining cper buffer memory region
  plat/sgi: refactor DMC-620 error handling SMC function id
  plat/sgi: refactor SDEI specific macros

Add the secure partition mmap table and the secure partition boot
information to support secure partitions on RD-N2 platform. In addition
to this, add the required memory region mapping for accessing the
SoC peripherals from the secure partition.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I2c75760d6c8c3da3ff4885599be420e924aeaf3c

* changes:
  stm32mp1: add TZC400 interrupt management
  stm32mp1: use TZC400 macro to describe filters
  tzc400: add support for interrupts

A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.

For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1

On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.

In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7

For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617

Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c

Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db

Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee

The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9

The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13

When the BL31 for the Allwinner H616 runs in DRAM, we need to make sure
we tell the non-secure world about the memory region it uses.

Add a reserved-memory node to the DT, which covers the area that BL31
could occupy. The "no-map" property will prevent OSes from mapping
the area, so there would be no speculative accesses.

Change-Id: I808f3e1a8089da53bbe4fc6435a808e9159831e1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.

The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.

Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Change-Id: I557fd05401e24204952135cf3ca26479a43ad1f1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

In preparation for changing the memory map, express the locations of the
various code and data pieces more dynamically, allowing SoCs to override
the memmap later.
Also prepare for the SCP region to become optional.

No functional change.

Change-Id: I7ac01e309be2f23bde2ac2050d8d5b5e3d6efea2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The code to power the current core off when SCPI is not available is now
different for the two supported SoC families.
To make adding new platforms easier, move sunxi_cpu_power_off_self()
into the SoC directory, so we don't need to carry definitions for both
methods for all SoCs.

On the H6 we just need to trigger the CPUIDLE hardware, so can get rid
of all the code to program the ARISC, which is now only needed for the
A64 version.

Change-Id: Id2a1ac7dcb375e2fd021b441575ce86b4d7edf2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

For the existing SoCs we support, we use SEPARATE_NOBITS_REGION, to move
some parts of the data into separate memory regions (to save on the SRAM
A2 we are loaded into).
For the upcoming H616 platform this is of no concern (we run in DRAM),
so make this flag a platform choice instead.

Change-Id: Ic01d49578c6274660f8f112bd23680d3eca3be7a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installation.

Add some ASCII art about the layout of our virtual memory map, which
uses a non-trivial condensed virtual address space.

Change-Id: Iaaa79b4366012394e15e4c1b26c212b5efb6ed6a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The upcoming refactoring to support the new H616 SoCs will push the A64
build over the edge, by using more than the 48KB of SRAM available.

To reduce the code size, set some libfdt options that aim to reduce
sanity checks (for saving code space):
- ASSUME_LATEST: only allow v17 DTBs (as created by dtc)
- ASSUME_NO_ROLLBACK: don't prepare for failed DT additions
- ASSUME_LIBFDT_ORDER: assume sane ordering, as done by dtc

Change-Id: I12c93ec09e7587c5ae71e54947f817c32ce5fd6d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Add basic support for Makalu ELP processor core.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1ddbb8dd43326ecb8ff188f6f8fcf239826a93

* changes:
  nxp lx2160a-aqds: new plat based on soc lx2160a
  NXP lx2160a-rdb: new plat based on SoC lx2160a
  nxp lx2162aqds: new plat based on soc lx2160a
  nxp: errata handling at soc level for lx2160a
  nxp: make file for loading additional ddr image
  nxp: adding support of soc lx2160a
  nxp: deflt hdr files for soc & their platforms
  nxp: platform files for bl2 and bl31 setup
  nxp: warm reset support to retain ddr content
  nxp: nv storage api on platforms
  nxp: supports two mode of trusted board boot
  nxp: fip-handler for additional fip_fuse.bin
  nxp: fip-handler for additional ddr-fip.bin
  nxp: image loader for loading fip image
  nxp: svp & sip smc handling
  nxp: psci platform functions used by lib/psci
  nxp: helper function used by plat & common code
  nxp: add data handler used by bl31
  nxp: adding the driver.mk file
  nxp-tool: for creating pbl file from bl2
  nxp: adding the smmu driver
  nxp: cot using nxp internal and mbedtls
  nxp:driver for crypto h/w accelerator caam
  nxp:add driver support for sd and emmc
  nxp:add qspi driver
  nxp: add flexspi driver support
  nxp: adding gic apis for nxp soc
  nxp: gpio driver support
  nxp: added csu driver
  nxp: driver pmu for nxp soc
  nxp: ddr driver enablement for nxp layerscape soc
  nxp: i2c driver support.
  NXP: Driver for NXP Security Monitor
  NXP: SFP driver support for NXP SoC
  NXP: Interconnect API based on ARM CCN-CCI driver
  NXP: TZC API to configure ddr region
  NXP: Timer API added to enable ARM generic timer
  nxp: add dcfg driver
  nxp:add console driver for nxp platform
  tools: add mechanism to allow platform specific image UUID
  tbbr-cot: conditional definition for the macro
  tbbr-cot: fix the issue of compiling time define
  cert_create: updated tool for platform defined certs, keys & extensions
  tbbr-tools: enable override TRUSTED_KEY_CERT

New NXP platform lx2160a-qds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I500ddbe9e56c4af5f955da6ecbd4ddc5fbe89a12

New NXP platform lx2160a-rdb(Reference Design Board):
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9c10dac9d5e67d44a2d94a7a27812220fdcc6ae3

New NXP platform lx2162aqds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I53bfff85398313082db77c77625cb2d40cd9b1b1

SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd

- NXP SoC lx2160a needs additional ddr_fip.bin.

- There are three types of ddr image that can be created:
  -- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
  -- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
     CoT/secure boot.
  -- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
     CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c

* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
  - soc.def
  - soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
  - soc.c
* platform specific helper functions implemented at:
  - aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
  etc. are implemented at:
  - aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
  - aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8

- Default header files for:
  -- plat/nxp/soc-lxxxx/include/soc.h uses:
	--- soc_default_base_addr.h
        --- soc_default_base_macros.h

  -- plat/nxp/soc-lxxxx/<$PLAT>/platform_def.h uses:
	--- plat_default_def.h: Every macro define can be overidden.

  -- include/common/tbbr/tbbr_img_def.h uses:
	--- plat_tbbr_img_def.h: platform specific new FIP image macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic50003e27e87891be3cd18bdb4e14a1c7272d492