GitLab

On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.

In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7

For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617

Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c

Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db

Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee

The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9

The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13

The upcoming refactoring to support the new H616 SoCs will push the A64
build over the edge, by using more than the 48KB of SRAM available.

To reduce the code size, set some libfdt options that aim to reduce
sanity checks (for saving code space):
- ASSUME_LATEST: only allow v17 DTBs (as created by dtc)
- ASSUME_NO_ROLLBACK: don't prepare for failed DT additions
- ASSUME_LIBFDT_ORDER: assume sane ordering, as done by dtc

Change-Id: I12c93ec09e7587c5ae71e54947f817c32ce5fd6d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  nxp lx2160a-aqds: new plat based on soc lx2160a
  NXP lx2160a-rdb: new plat based on SoC lx2160a
  nxp lx2162aqds: new plat based on soc lx2160a
  nxp: errata handling at soc level for lx2160a
  nxp: make file for loading additional ddr image
  nxp: adding support of soc lx2160a
  nxp: deflt hdr files for soc & their platforms
  nxp: platform files for bl2 and bl31 setup
  nxp: warm reset support to retain ddr content
  nxp: nv storage api on platforms
  nxp: supports two mode of trusted board boot
  nxp: fip-handler for additional fip_fuse.bin
  nxp: fip-handler for additional ddr-fip.bin
  nxp: image loader for loading fip image
  nxp: svp & sip smc handling
  nxp: psci platform functions used by lib/psci
  nxp: helper function used by plat & common code
  nxp: add data handler used by bl31
  nxp: adding the driver.mk file
  nxp-tool: for creating pbl file from bl2
  nxp: adding the smmu driver
  nxp: cot using nxp internal and mbedtls
  nxp:driver for crypto h/w accelerator caam
  nxp:add driver support for sd and emmc
  nxp:add qspi driver
  nxp: add flexspi driver support
  nxp: adding gic apis for nxp soc
  nxp: gpio driver support
  nxp: added csu driver
  nxp: driver pmu for nxp soc
  nxp: ddr driver enablement for nxp layerscape soc
  nxp: i2c driver support.
  NXP: Driver for NXP Security Monitor
  NXP: SFP driver support for NXP SoC
  NXP: Interconnect API based on ARM CCN-CCI driver
  NXP: TZC API to configure ddr region
  NXP: Timer API added to enable ARM generic timer
  nxp: add dcfg driver
  nxp:add console driver for nxp platform
  tools: add mechanism to allow platform specific image UUID
  tbbr-cot: conditional definition for the macro
  tbbr-cot: fix the issue of compiling time define
  cert_create: updated tool for platform defined certs, keys & extensions
  tbbr-tools: enable override TRUSTED_KEY_CERT

New NXP platform lx2160a-qds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I500ddbe9e56c4af5f955da6ecbd4ddc5fbe89a12

New NXP platform lx2160a-rdb(Reference Design Board):
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9c10dac9d5e67d44a2d94a7a27812220fdcc6ae3

New NXP platform lx2162aqds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I53bfff85398313082db77c77625cb2d40cd9b1b1

SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd

- NXP SoC lx2160a needs additional ddr_fip.bin.

- There are three types of ddr image that can be created:
  -- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
  -- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
     CoT/secure boot.
  -- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
     CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c

* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
  - soc.def
  - soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
  - soc.c
* platform specific helper functions implemented at:
  - aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
  etc. are implemented at:
  - aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
  - aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8

- Default header files for:
  -- plat/nxp/soc-lxxxx/include/soc.h uses:
	--- soc_default_base_addr.h
        --- soc_default_base_macros.h

  -- plat/nxp/soc-lxxxx/<$PLAT>/platform_def.h uses:
	--- plat_default_def.h: Every macro define can be overidden.

  -- include/common/tbbr/tbbr_img_def.h uses:
	--- plat_tbbr_img_def.h: platform specific new FIP image macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic50003e27e87891be3cd18bdb4e14a1c7272d492

For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017

NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).

As part of first cold boot, DDR training data is stored in NV storage.

As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.

On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d

NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
           retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05

NXP SoC supports two TBB mode:
- MBED_TLS based
  -- ROTK key hash is placed as part of the BL2 binary at section:
     --- .rodata.nxp_rotpk_hash
  -- Supporting non-volatile counter via SFP.
     -- platform function used by TFA common authentication code.

- NXP CSF based
  -- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc

All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
  -- SRK Hash
  -- OTPMK
  -- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1

Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
  first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
  -- include/common/tbbr/tbbr_img_def.h uses:
	--- plat_tbbr_img_def.h: platform specific new FIP image macros.

  -- include/tools/share/firmware_image_package.h uses:
	--- plat_def_fip_uuid.h: platform specific new UUID macros.
	    ---- Added UUID for DDR images to create FIP-DDR.
	    ---- Added UUID for FUSE provisioning images to create FIP-fuse.

  -- include/tools/share/tbbr_oid.h uses:
	--- platform_oid.h: platform specific new OID  macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91

function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9

SMC call handling at EL3 due SIP and SVC calls.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: If86ee43477fc3b6116623928a3299d4e9015df8c

Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9853263ed38fb2a9f04b9dc7d768942e32074719

Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Idafd8b0d94edf3515e8317431274d77289b7a1d0

bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic6c3a173f9f1f7b85244fc4484e247fdbb438b9c

NXP tool to create pbl from bl2 binary:
- RCW is prepended to BL2.bin
- If TRUSTED_BOARD_BOOT=1, pre-append the CSF header
	to be understood by NXP boot-rom.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Iddc7336a045222e2073ddad86358ebc4440b8bcf

NXP SMMU driver API for NXP SoC.
- Currently it supports by-passing SMMU, called only when NXP CAAM
is enabled.
- (TBD) AMQ based SMMU access control: Access Management Qualifiers (AMQ)
  advertised by a bus master for a given transaction.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I23a12928ddedb1a2cf4b396606e35c67e016e331

Chain of trust(CoT) is enabled on NXP SoC in two ways:
- Using MbedTLS, parsing X509 Certificates.
- Using NXP internal method parsing CSF header
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I78fb28516dfcfa667bebf8a1951ffb24bcab8de4

NXP has hardware crypto accelerator called CAAM.
- Work with Job ring
- Jobs are submitted to CAAM in the form of 64 word
  descriptor.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I02bcfce68143b8630e1833a74c4b126972f4323d