Skip to content

GitLab

Switch branch/tag
  1. 23 May, 2017 2 commits
    • Masahiro Yamada's avatar
      FVP,Juno: switch FVP and Juno to use generic TBBR OID header · 232c6b34
      Masahiro Yamada authored 
      

The header tbbr_oid.h contains OIDs obtained by ARM Ltd.
so there is no good reason to use platform_oid.h
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      232c6b34
    • Masahiro Yamada's avatar
      cert: move platform_oid.h to include/tools_share for all platforms · bb41eb7a
      Masahiro Yamada authored 
      

Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).

For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd.  This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.

The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h

Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1.  USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      bb41eb7a
  3. 16 May, 2017 1 commit
  5. 15 May, 2017 1 commit
  7. 12 May, 2017 3 commits
  9. 11 May, 2017 1 commit
  11. 10 May, 2017 3 commits
  13. 04 May, 2017 1 commit
    • Jeenu Viswambharan's avatar
      Introduce ARM SiP service to switch execution state · b10d4499
      Jeenu Viswambharan authored 
      

In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether the lower exception level executes in AArch64 or AArch32 state.
For an exception level to have its execution state changed at run time,
it must request the change by raising a synchronous exception to the
higher exception level.

This patch implements and adds such a provision to the ARM SiP service,
by which an immediate lower exception level can request to switch its
execution state. The execution state is switched if the request is:

  - raised from non-secure world;

  - raised on the primary CPU, before any secondaries are brought online
    with CPU_ON PSCI call;

  - raised from an exception level immediately below EL3: EL2, if
    implemented; otherwise NS EL1.

If successful, the SMC doesn't return to the caller, but to the entry
point supplied with the call. Otherwise, the caller will observe the SMC
returning with STATE_SW_E_DENIED code. If ARM Trusted Firmware is built
for AArch32, the feature is not supported, and the call will always
fail.

For the ARM SiP service:

  - Add SMC function IDs for both AArch32 and AArch64;
  - Increment the SiP service minor version to 2;
  - Adjust the number of supported SiP service calls.

Add documentation for ARM SiP service.

Fixes ARM-software/tf-issues#436

Change-Id: I4347f2d6232e69fbfbe333b340fcd0caed0a4cea
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      b10d4499
  15. 03 May, 2017 1 commit
  17. 02 May, 2017 1 commit
  19. 01 May, 2017 7 commits
  21. 29 Apr, 2017 1 commit
    • Scott Branden's avatar
      Move defines in utils.h to utils_def.h to fix shared header compile issues · 53d9c9c8
      Scott Branden authored 
      

utils.h is included in various header files for the defines in it.
Some of the other header files only contain defines.  This allows the
header files to be shared between host and target builds for shared defines.

Recently types.h has been included in utils.h as well as some function
prototypes.

Because of the inclusion of types.h conflicts exist building host tools
abd these header files now.  To solve this problem,
move the defines to utils_def.h and have this included by utils.h and
change header files to only include utils_def.h and not pick up the new
types.h being introduced.

Fixes ARM-software/tf-issues#461
Signed-off-by: default avatarScott Branden <scott.branden@broadcom.com>

Remove utils_def.h from utils.h

This patch removes utils_def.h from utils.h as it is not required.
And also makes a minor change to ensure Juno platform compiles.

Change-Id: I10cf1fb51e44a8fa6dcec02980354eb9ecc9fa29
      53d9c9c8
  23. 26 Apr, 2017 4 commits
  25. 25 Apr, 2017 1 commit
    • tony.xie's avatar
      rockchip: rk3328: support rk3328 · 0d5ec955
      tony.xie authored 
      
rk3328 is a Quad-core soc and Cortex-a53 inside!
This patch supports the following functions:
1、power up/off cpus
2、suspend/resume cpus
3、suspend/resume system
4、reset system
5、power off system

Change-Id: I60687058d13912c6929293b06fed9c6bc72bdc84
Signed-off-by: default avatartony.xie <tony.xie@rock-chips.com>
      0d5ec955
  27. 24 Apr, 2017 1 commit
    • Soby Mathew's avatar
      CSS: Allow system suspend only via PSCI SYSTEM_SUSPEND API · abd2aba9
      Soby Mathew authored 
      

The CSS power management layer previously allowed to suspend system
power domain level via both PSCI CPU_SUSPEND and PSCI SYSTEM_SUSPEND
APIs. System suspend via PSCI CPU_SUSPEND was always problematic to
support because of issues with targeting wakeup interrupts to
suspended cores before the per-cpu GIC initialization is done. This
is not the case for PSCI SYSTEM_SUSPEND API because all the other
cores are expected to be offlined prior to issuing system suspend and
PSCI CPU_ON explicit calls will be made to power them on. Hence the Juno
platform used to downgrade the PSCI CPU_SUSPEND request for system
power domain level to cluster level by overriding the default
`plat_psci_pm_ops` exported by CSS layer.

Given the direction the new CSS platforms are evolving, it is best to
limit the system suspend only via PSCI SYSTEM_SUSPEND API for all
CSS platforms. This patch makes changes to allow system suspend
only via PSCI SYSTEM_SUSPEND API. The override of `plat_psci_ops`
for Juno is removed.

Change-Id: Idb30eaad04890dd46074e9e888caeedc50a4b533
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      abd2aba9
  29. 21 Apr, 2017 1 commit
  31. 20 Apr, 2017 4 commits
    • Yatharth Kochar's avatar
      AArch32: Add SP_MIN support for JUNO · 6f249345
      Yatharth Kochar authored 
      

This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.

Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: default avatarYatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: default avatardp-arm <dimitris.papastamos@arm.com>
      6f249345
    • Yatharth Kochar's avatar
      Changes to support execution in AArch32 state for JUNO · 07570d59
      Yatharth Kochar authored 
      

Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
  Loads SP_MIN & BL33 (AArch32 executable)images.
  Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
  at the entrypoint address of SP_MIN, at HI-VECTOR address and
  then request for warm reset in AArch32 state using RMR_EL3.

This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
  HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
  SP_MIN and BL33 AArch32 executable images.

A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.

NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.

Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: default avatarYatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: default avatardp-arm <dimitris.papastamos@arm.com>
      07570d59
    • dp-arm's avatar
      css: Ensure PSCI system off/reset is not interrupted · 0498343a
      dp-arm authored 
      

If there is a pending interrupt, it is possible for the AP to come out
of the final WFI before SCP has a chance to act on it.  Prevent this
by disabling the GIC CPU interface before issuing a WFI.

Previously, SCP would not wait on WFI before taking an action but
would shut down the core or system regardless.

Change-Id: Ib0bcf69a515d540ed4f73c11e40ec7c863e39c92
Signed-off-by: default avatardp-arm <dimitris.papastamos@arm.com>
      0498343a
    • Antonio Nino Diaz's avatar
      Remove build option `ASM_ASSERTION` · 044bb2fa
      Antonio Nino Diaz authored 
      

The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.

All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.

ASM_ASSERTION has been removed from the user guide.

Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      044bb2fa
  33. 19 Apr, 2017 2 commits
  35. 17 Apr, 2017 1 commit
  37. 13 Apr, 2017 4 commits