GitLab

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Ib327bda239bb5163c60764bae90b0739589dcf66

* changes:
  driver: brcm: add RNG driver
  plat/brcm: Define RNG base address

Getting the actual size of a DTB blob is useful beyond the Raspberry Pi
port, so let's move this helper to a common header.

Change-Id: Ia5be46e9353ca859a1e5ad9e3c057a322dfe22e2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  plat: imx8mp: Add the basic support for i.MX8MP
  plat: imx8m: Move the gpc hw reg to a separate header file

This patch cleans up MISRA C violations in the IO driver files.  Some
things did not make sense to fix or would require sweeping changes
but the simple issues have been resolved.

Defects Fixed

File                        Line Rule
drivers/io/io_fip.c         39   MISRA C-2012 Rule 5.6 (required)
drivers/io/io_fip.c         52   MISRA C-2012 Rule 8.9 (advisory)
drivers/io/io_fip.c         60   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_fip.c         285  MISRA C-2012 Rule 8.9 (advisory)
drivers/io/io_fip.c         336  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_fip.c         340  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_fip.c         342  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_memmap.c      30   MISRA C-2012 Rule 5.6 (required)
drivers/io/io_memmap.c      32   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_memmap.c      85   MISRA C-2012 Rule 11.8 (required)
drivers/io/io_semihosting.c 66   MISRA C-2012 Rule 11.8 (required)
drivers/io/io_storage.c     73   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_storage.c     116  MISRA C-2012 Rule 13.4 (advisory)
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9b1b2b684588d4eaab674ed4ed04f3950dd21f4

* changes:
  arm_fpga: Predefine DTB and BL33 load addresses
  arm_fpga: Add Klein and Matterhorn support
  arm_fpga: Support more CPU clusters

This patch redefines 'true' and 'false' definitions in
'include/lib/libc/stdbool.h' to fix defect reported by
MISRA C-2012 Rule 10.1
"The expression \"0\" of non-boolean essential type is
being interpreted as a boolean value for the operator \"? :\"."

Change-Id: Ie1b16e5826e5427cc272bd753e15d4d283e1ee4c
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.

To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06cd39dbefaf492682d9bbb0c82b950dd31fb416

Merge "Add myself and Andre Przywara as code owners for the Arm FPGA platform port" into integration

Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I490d7e4d49bd9f5a62d343a264a1e14c2066ceca

Change-Id: I4f5efcd7638a25c317382b51f05e6b9aa283d068
Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>

* changes:
  plat: marvell: armada: mcbin: squash several IO windows into one
  plat: marvell: armada: fix BL32 extra parameters usage
  drivers: marvell: Fix the LLC SRAM driver
  plat: marvell: armada: a8k: change CCU LLC SRAM mapping
  plat: marvell: armada: adjust trusted DRAM size to match OP-TEE OS
  drivers: marvell: mg_conf_cm3: pass comphy lane number to AP FW
  plat: marvell: armada: move mg conf related code to appropriate driver
  marvell: comphy: start AP FW when comphy AP mode selected
  drivers: marvell: mg_conf_cm3: add basic driver
  tools: doimage: change the binary image alignment to 16
  tools: doimage: migrate to mbedtls v2.8 APIs

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I6d3949a971fada5a086b788dbe274f8451fcfc0d

BL2 size gets increased due to the libfdt library update and 
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1

Fixed build failure by increasing BL2 image size limit by 4Kb.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

- Fix the line address macro
- LLC invalidate and enable before ways lock for allocation
- Add support for limited SRAM size allocation
- Add SRAM RW test function

Change-Id: I1867ece3047566ddd7931bd7472e1f47fb42c8d4
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Since the AP process can be enabled on different setups, the information
about used comphy lane should be passed to AP FW. For instance:
- A8K development board uses comphy lane 2 for eth 0
- cn913x development board uses comphy lane 4 for eth 0

Change-Id: Icf001fb3eea4d9c24c09384e49844ecaf8655ad2
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>