GitLab

Currently, the tool's makefile override the tool's binary name
which is already been defined in the main makefile.
Hence fix is provided so that the tool's makefile get the tool's
binary name from the main makefile instead of overriding it.

Change-Id: I8af2bd391a96bba2dbcddef711338a94ebf5f038
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

This reverts commit e7d344de.
 This reverts the patch https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/5313 due to a timing issue with the merge.  The merge occurred at the same time as the additional comments and thusly were were not seen until the merge was done.  This reverts the change and additional patches from Alexei will follow to address the concerns expressed in the orignal patch.

Change-Id: Iae5f6403c93ac13ceeda29463883fcd4c437f2b7

Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I4e9fbfcfda4ed4b87d5ece1c609c57c73d617d4c

* changes:
  SPMC: embed secondary core ep info into to SPMC context
  SPMC: manifest changes to support multicore boot
  SPMD: secondary cores PM on and off SPD hooks relayed to SPMC
  SPMD: handle SPMC message to register secondary core entry point
  SPMD: introduce SPMC to SPMD messages
  SPMD: register the SPD PM hooks
  SPMD: add generic SPD PM handlers
  SPMD: enhance SPMC internal boot states
  SPMD: entry point info get helper

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Icdb15b8664fb3467ffd55b44d1f0660457192586

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Icf90c2ccce75257908ba3d4703926041d64b1dd3

Define SPMD PM hooks for warm boot and off events. svc_on_finish handler
enters the SPMC at the entry point defined by the secondary EP register
service. The svc_off handler notifies the SPMC that a physical core is
being turned off through a notification message.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2609a75a0c6ffb9f6313fc09553be2b29a41de59

Upon booting, the SPMC running on the primary core shall register the
secondary core entry points to which a given secondary core being woken
up shall jump to into the SPMC . The current implementation assumes the
SPMC calls a registering service implemented in the SPMD for each core
identified by its MPIDR. This can typically happen in a simple loop
implemented in the early SPMC initialization routines by passing each
core identifier associated with an entry point address and context
information.
This service is implemented on top of a more generic SPMC<=>SPMD
interface using direct request/response message passing as defined by
the FF-A specification.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I1f70163b6b5cee0880bd2004e1fec41e3780ba35

FF-A interface to handle SPMC to SPMD direct messages requests.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Ia707a308c55561a31dcfa86e554ea1c9e23f862a

Change-Id: If88d64c0e3d60accd2638a55f9f3299ec700a8c8
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>

This patch defines and registers the SPMD PM handler hooks.
This is intended to relay boot and PM events to the SPMC.

Change-Id: If5a758d22b8d2152cbbb83a0cad563b5e1c6bd49
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

This patch adds SPMC states used by the SPMD to track SPMC boot phases
specifically on secondary cores.

Change-Id: If97af7352dda7f04a8e46a56892a2aeddcfab91b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

This patch provides a helper to get the entry_point_info
structure used by the boot CPU as it is used to initialise
the SPMC context on secondary CPUs.

Change-Id: I99087dc7a86a7258e545d24a2ff06aa25170f00c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>

* changes:
  doc: Update description for AT speculative workaround
  lib/cpus: Report AT speculative erratum workaround
  Add wrapper for AT instruction

CPU hotplug & cpuidle have some race condition when doing CPU hotplug
stress test. different CPU cores have the chance to access the same
GPC register(A53_AD), so lock is necessary to do exlusive access.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I1296592e05fa78429c3f0fac066951521db755e3

Change-Id: I5362780db422772fd547dc8e68e459109edccdd0
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

* changes:
  plat/allwinner: Only enable DRIVEVBUS if really needed
  plat/allwinner: Use common gicv2.mk

Trace analysis of FVP_Base_AEMv8A model running in
Aarch32 mode with the build options listed below:
TRUSTED_BOARD_BOOT=1 GENERATE_COT=1
ARM_ROTPK_LOCATION=devel_ecdsa KEY_ALG=ecdsa
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_ecdsa.pem
shows that when auth_signature() gets called
71.84% of CPU execution time is spent in memset() function
written in C using single byte write operations,
see lib\libc\memset.c.
This patch replaces C memset() implementation with assembler
version giving the following results:
- for Aarch32 in auth_signature() call memset() CPU time
reduced to 24.84%.
- Number of CPU instructions executed during TF-A
boot stage before start of BL33 in RELEASE builds:
----------------------------------------------
|  Arch   |     C      |  assembler |    %   |
----------------------------------------------
| Aarch32 | 2073275460 | 1487400003 | -28.25 |
| Aarch64 | 2056807158 | 1244898303 | -39.47 |
----------------------------------------------
The patch also replaces memset.c with aarch64/memset.S
in plat\nvidia\tegra\platform.mk.

Change-Id: Ifbf085a2f577a25491e2d28446ee95a4ac891597
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Add information about the third partition so it can be loaded into SPM
when running the tests
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5544e88df391ef294ddf6b5750d468d3e74892b1

Make this more scalable by explicitly checking internal and hardware
states at run_time
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I1c6ed1c1badb3538a93bff3ac5b5189b59cccfa1

* changes:
  plat: imx8m: Correct the imr mask reg offset
  plat: imx8m: Keep A53 PLAT on in wait mode(ret)

The number of gpc imr mask reg & the offset is different
on some SOC, so correct it & replace the magic number with
macro define.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ic701675cdd92e043dcd7f06722f2e871068aec74

Keep A53 PLAT(SCU) power domain on in wait mode(ret).
RBC count only need to be set in PLAT OFF mode, so
change it accordingly.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ie55e25c8210d298506fc4dca7a9653583db45e0c

* changes:
  Tegra: platform: add function to check t194 chip
  Tegra: common: make plat_psci_ops routines static

This patch adds tegra_chipid_is_t194() function to check if it is a
Tegra 194 chip.

Change-Id: I6da6d3a2c9676b748931e42fde1b174cbcb4fd40
Signed-off-by: David Pu <dpu@nvidia.com>

This patch makes Tegra platform psci ops routines to static. These
routines are called by PSCI framework and no external linkage is
necessary. This patch also fixes MISRA C-2012 Rule 8.6 violations.

Change-Id: Idd2381809f76dc0fd578c1c92c0f8eea124f2e88
Signed-off-by: David Pu <dpu@nvidia.com>

Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a