GitLab

First put Makefile variables definition, then definitions for each feature,
then C flags, then source files, then compilation rules.

Change-Id: I238115ea2fe4ebafccd2135979814c27932c34e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>

To simplify the rule that creates the concatenated binary, use ASFLAGS
instead of adding all paths in the AS command line. This allows a better
management if a binary is not present.

Change-Id: Ic8b4566e7dedc6f55be355a92e3b214cef138d9b
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The previous proprietary version was not correctly handling dependencies.
Using MAKE_LD from make_helpers files now correctly handles that.
The generated linker script is the same as before.

Change-Id: Iccfd8dc3fffa7a33e73b184b72e0dfd5d26bc9c9
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Coverity raised an eyebrow over our GICR frame size calculation:
========
    CID 362942:  Integer handling issues  (OVERFLOW_BEFORE_WIDEN)
Potentially overflowing expression "nr_cores * gicr_frame_size" with type
"unsigned int" (32 bits, unsigned) is evaluated using 32-bit arithmetic,
and then used in a context that expects an expression of type "uint64_t"
(64 bits, unsigned).
========

Even with a GICv4 (256KB frame size) we need 16384 cores to overflow
32-bit, so it's not a practical issue.

But it's also easy to fix, so let's just do that: cast gicr_frame_size
to an unsigned 64-bit integer, so that the multiplication is done in the
64-bit realm.

Change-Id: Iad10e19b9e58d5fbf9d13205fbcef0aac5ae48af
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  Rename Neoverse Zeus to Neoverse V1
  Rename Cortex Hercules AE to Cortex 78 AE

Only define arm_get_rotpk_info_regs if ROTPK is in registers,
i.e. (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_REGS_ID). This will
allow platform build without definition of TZ_PUB_KEY_HASH_BASE
if dedicated registers for ROTPK are not available on the platform.

Change-Id: I74ee2d5007f5d876a031a1efca20ebee2dede0c7
Signed-off-by: Usama Arif <usama.arif@arm.com>

* changes:
  docs: marvell: update mv_ddr branch
  plat: marvell: armada: a3k: rename the UART images archive
  plat: marvell: armada: a3k: allow image load to RAM address 0
  marvell: comphy: cp110: add support for USB comphy polarity invert
  marvell: comphy: cp110: add support for SATA comphy polarity invert
  marvell: comphy: cp110: implement erratum IPCE_COMPHY-1353
  drivers: marvell: mochi: Update AP incoming masters secure level
  plat: marvell: armada: add ccu window for workaround errata-id 3033912
  plat: marvell: ap806: implement workaround for errata-id FE-4265711

Change-Id: Ieb411e2f8092fa82062e619305b680673a8f184f
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Change-Id: Ic0ca51a855660509264ff0d084c068e1421ad09a
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Now that the BLE image sources (mv_ddr) are updated, reflect
the proper branch in the Armada build howto.

Change-Id: I959d1343d0dfdd681c7e39bdcaed9b36aaddfca1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Add *.bin extension to UART recovery images archive name.
Such naming will cause the UART recovery images to be copied to the
Buildroot output folder upon flash image build.

Change-Id: I6992df1ab2ded725bed58e5baf245ae92c4cb289
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Marvell uses RAM address 0x0 for loading BL33 stage images.
When ATF is built with DEBUG=1, its IO subsystem fails on
assert checking the destination RAM address != 0.
This patch adds PLAT_ALLOW_ZERO_ADDR_COPY to A3K platform
allowing to bypass the above check in debug mode.

Change-Id: I687e35cb2e9dc3166bdaa81b3904c20b784c5c6a
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The polarity inversion for USB was not tested due to lack of hw design
which requires it. Currently all supported boards doesn't require USB
phy polarity inversion, therefore COMPHY_POLARITY_NO_INVERT is set for
all boards. Enable the option for the ones that need it.

Change-Id: Ia5f2ee313a93962e94963e2dd8a759ef6d9da369
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The cp110 comphy has ability to invert RX and/or TX polarity. Polarity
depends on board design. Currently all supported boards doesn't require
SATA phy polarity invert, therefore COMPHY_POLARITY_NO_INVERT is set for
all boards.

Change-Id: Ifd0bc6aaf8a76a0928132b197422f3193cf020d5
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

According to erratum IPCE_COMPHY-1353 the TX_IDLE bit should
be toggled in addition to the XFI/SFI PHY reset.

Change-Id: Idd2c2abfcb2f960caa01e6d69db524c2e4734f50
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Do not force non-secure access level for PIDI masters when LLC_SRAM
is enabled. The EIP197 is located on CP0 and need to access secure
SRAM in AP LLC. This requires EIP197 DMA to have AXPROT[1]=0 and not
changed when forwarded to address decoding tables.

Change-Id: I8962db94a124350c14220ba6d0364d294ae4664a
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Added ccu window to allow access to addresses
in the range [0xf100_0000, 0xf1ff_ffff].

Change-Id: I63ee68338d674114d01cd627198dc907653493e8
Signed-off-by: Alex Leibovich <alexl@marvell.com>

ERRATA ID: FE-4265711 - Incorrect CNTVAL reading

CNTVAL reflects the global system counter value in binary format.
Due to this erratum, the CNTVAL value presented to the processor
may be incorrect for several clock cycles.

Workaround: Override the default value of AP Register Device General
control 20 [19:16] and AP Register Device General Control 21 [11:8]
to the value of 0x3.

Change-Id: I1705608d08acd9631ab98d6f7ceada34d6b8336f
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Cortex A76 erratum 1868343 is a Cat B erratum, present in older
revisions of the Cortex A76 processor core.  The workaround is to
set a bit in the CPUACTLR_EL1 system register, which delays instruction
fetch after branch misprediction. This workaround will have a small
impact on performance.

This workaround is the same as workarounds for errata 1262606 and
1275112, so all 3 have been combined into one function call.

SDEN can be found here:
https://documentation-service.arm.com/static/5f2bed6d60a93e65927bc8e7

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7f2f9965f495540a1f84bb7dcc28aff45d6cee5d

Update the libfdt source files, the upstream commit is 73e0f143b73d
("libfdt: fdt_strerror(): Fix comparison warning").

This brings us the fixes for the signed/unsigned comparison warnings,
so platforms can enable -Wsign-compare now.

Change-Id: I303d891c82ffea0acefdde27289339db5ac5a289
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

With -Wsign-compare, compilers issue a warning in the SPMD code:
====================
services/std_svc/spmd/spmd_pm.c:35:22: error: comparison of integer
expressions of different signedness: 'int' and 'unsigned int'
[-Werror=sign-compare]
   35 |  if ((id < 0) || (id >= PLATFORM_CORE_COUNT)) {
      |                      ^~
cc1: all warnings being treated as errors
====================

Since we just established that "id" is positive, we can safely cast it
to an unsigned type to make the comparison have matching types.

Change-Id: I6ef24804c88136d7e3f15de008e4fea854f10ffe
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Morello platform has a SCP which brings the primary Rainier CPU
out of reset which starts executing at BL31.

This patch provides documentation support for Morello platform.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I38f596668e2b14862d543fabc04549ff34bfb8a2

Updated the list of supported FVP platform as per latest
FVP platform release.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I45ef79aff147ed598a3a92ab6f6b277f7f70604a

stm32mp15_optee_defconfig has been dropped from U-Boot as it became
identical to stm32mp15_trusted_defconfig.

Furthermore give a hint how OP-TEE is supposed to be installed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Id8f0bd84a87e3a62072dd4405aadddcdd3511213

This patch makes changes required to get the morello
platform working with the tip of TF-A.

Change-Id: I095006615c9959bba49fcc75b52e1de7d7486309
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

This patch migrates the mbedcrypto dependency for TF-A
to mbedTLS repo v2.24.0 which is the latest release tag.
The relevant documentation is updated to reflect the
use of new version.

Change-Id: I116f44242e8c98e856416ea871d11abd3234dac1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

* changes:
  stm32mp1: correct crash console GPIO alternate configuration
  stm32mp1: add plat_panic_handler function
  stm32mp1: update plat_report_exception
  Align AARCH32 version of debug.S with AARCH64

* changes:
  arm_fpga: Add platform documentation
  arm_fpga: Add post-build linker script
  arm_fpga: Add ROM trampoline
  arm_fpga: Add devicetree file
  arm_fpga: Remove SPE PMU DT node if SPE is not available
  arm_fpga: Adjust GICR size in DT to match number of cores
  fdt: Add function to adjust GICv3 redistributor size
  drivers: arm: gicv3: Allow detecting number of cores