GitLab

* changes:
  Tegra: prepare boot parameters for Trusty
  Tegra: per-CPU GIC CPU interface init

* changes:
  intel: Fix SMC SIP service
  intel: Introduce mailbox response length handling
  intel: Fix mailbox config return status
  intel: Mailbox driver logic fixes
  plat: intel: Fix FPGA manager on reconfiguration
  plat: intel: Fix mailbox send_cmd issue
  intel: Modify mailbox's get_config_status

This patch fixes the bug in BL2 dynamic configuration initialisation
which prevents loading NT_FW_CONFIG image (ref. GENFW-3471).
It also adds parentheses around 'if' statement conditions to fix
Coverity defect.

Change-Id: I353566c29b84341887e13bf8098a4fedfc4e00ff
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Same enable method is used by all the four cores. So,
make it globally for all the cores instead of adding
it to individual level.

Change-Id: I9b5728b0e0545c9e27160ea586009d929eb78cad
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>

This change is to add L2 cache node into a5ds device tree.

Change-Id: I64b4b3e839c3ee565abbcd1567d1aa358c32d947
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>

This patch saves the boot parameters provided by the previous bootloader
during cold boot and passes them to Trusty. Commit 06ff251e

 introduced
the plat_trusty_set_boot_args() handler, but did not consider the boot
parameters passed by the previous bootloader. This patch fixes that
anomaly.

Change-Id: Ib40dcd02b67c94cea5cefce09edb0be4a998db37
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

* changes:
  intel: stratix10: Modify BL31 parameter handling
  intel: Modify BL31 address mapping
  intel: stratix10: Enable uboot entrypoint support

EA handlers for exceptions taken from lower ELs at the end invokes
el3_exit function. However there was a bug with sp maintenance which
resulted in el3_exit setting runtime stack to context. This in turn
caused memory corruption on consecutive EL3 entries.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I0424245c27c369c864506f4baa719968890ce659

This patch enables per-CPU GIC CPU interfaces during CPU
power on. The previous code initialized the distributor
for all CPUs, which was not required.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifd957b2367da06405b4c3e2225411adbaec35bb8

* changes:
  allwinner: h6: power: Switch to using the AXP driver
  drivers: allwinner: axp: Add AXP805 support

Fix FPGA reconfiguration driver logic
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0299c1a71f3456e9b441340314662494b8d3e4a0

Mailbox driver now handles variable response length
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic96854fdaadaf48379c5de688392df974e1c99c3

Modify mailbox config return code to improve debugging.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0a223291f4c5296203b3295a679a5857a446c692

Fix mailbox driver urgent command handling, doorbell routine,
and logic optimization.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If536a383f449ca2a68d60274303ec24f92411505

Fixes the SiP Service driver that is responsible for FPGA
reconfiguration. Also change the base address of FPGA reconfiguration
to 0x400000.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I2b84c12c85cd5fc235247131fec4916ed2fb56c8

There are a few issues in mailbox that needs to be fixed.
- Send doorbell after an indirect cmd
- Do not ring doorbell when polling mailbox response as it should've been
sent by send_cmd
- remove unneeded cmd_free_offset check
- Fix mailbox initialization
- Fix get_config_status returning a wrong status when the status is busy
- Add command length in mailbox command header
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: If613e2ca889a540a616c62d69ad0086a7cd46536

* changes:
  rockchip: make miniloader ddr_parameter handling optional
  rockchip: px30: cleanup securing of ddr regions
  rockchip: px30: move secure init to separate file
  rockchip: really use base+size for secure ddr regions
  rockchip: bring TZRAM_SIZE values in line

* changes:
  allwinner: Convert AXP803 regulator setup code into a driver
  allwinner: a64: power: Use fdt_for_each_subnode
  allwinner: a64: power: Remove obsolete register check
  allwinner: a64: power: Remove duplicate DT check
  allwinner: Build PMIC bus drivers only in BL31
  allwinner: a64: power: Make sunxi_turn_off_soc static
  allwinner: Merge duplicate code in sunxi_power_down
  allwinner: Clean up PMIC-related error handling
  allwinner: Synchronize PMIC enumerations
  allwinner: Enable clock before resetting I2C/RSB

Transfering the regions of ddr memory to additionally protect is very much
specific to some rockchip internal first stage bootloader and doesn't get
used in either mainline uboot or even Rockchip's published vendor uboot
sources.

This results in a big error
    ERROR:   over or zero region, nr=0, max=10
getting emitted on every boot for most users and such a message coming
from early firmware might actually confuse developers working with the
system.

As this mechanism seems to be only be used by Rockchip's internal miniloader
hide it behind a build conditional, so it doesn't confuse people too much.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I52c02decc60fd431ea78c7486cad5bac82bdbfbe

So far the px30-related ddr security was loading data for regions to secure
from a pre-specified memory location and also setting region0 to secure
the first megabyte of memory in hard-coded setting (top=0, end=0, meaning
1MB).

To make things more explicit and easier to read add a function doing
the settings for specified memory areas, like other socs have and also
add an assert to make sure any descriptor read from memory does not
overlap the TZRAM security in region0 and TEE security in region1.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I78441875112bf66a62fde5f1789f4e52a78ef95f

Similar to others like rk3399 and rk3288 move the secure init to a
separate file to unclutter the soc init a bit.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: Iebb38e24f1c7fe5353f139c896fb8ca769bf9691

Sphinx was showing the following warning message:

docs/getting_started/build-options.rst:200: WARNING: Bullet list ends
without a blank line; unexpected unindent.

Change-Id: Iad5d49c1e0d25dd623ad15bce1af31babf860c03
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Add-in support for handling BL31 parameter from non-BL2 image, ie. SPL
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I16118d791399f652b6d1093c10092935a3449c32

Load BL31 to DDR instead of On-Chip RAM for scalability. Also, make use
of On-Chip RAM for BL31 specific variables filling down from handoff
offset to reduce fragmentation
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib64f48bd14f71e5fca2d406f4ede3386f2881099

This patch will provide an entrypoint for uboot's spl into BL31.
BL31 will also handle secondary cpu state during uboot's cold boot
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I661bdb782c2d793d5fc3c7f78dd7ff746e33b7a3

Move the get_config_status out of sip_svc driver.
Modify the function so that it can return either
CONFIG_STATUS or RECONFIG_STATUS
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642d5900339e67f98be61380edc2b838e0dd47af

Separate SiP related definition from mailbox header file
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I45ba540f29d9261007f7ec23469358747cf140b4

The calls to secure ddr regions on rk3288 and rk3399 use parameters of
base and size - as it custom for specifying memory regions, but the
functions themself expect start and endpoints of the area.

This only works by chance for the TZRAM, as it starts a 0x0 and therefore
its end location is the same as its size.

To not fall into a trap later on adapt the functions to really take
base+size parameters.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: Idb9fab38aa081f3335a4eca971e7b7f6757fbbab