GitLab

Information is taken from the post https://lists.denx.de/pipermail/u-boot/2017-July/299351.html

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5f608e135ec56685a3e2b986a52670540d48a4bf

Default WTMI_IMG value was documented incorrectly. Also WTMI_IMG name may
be misleading as this option does not specify full WTMI image, just a main
loop (e.g. fuse.bin or custom RTOS image) without hardware initialization
code (DDR, CPU and clocks).
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I3de4a27ce2165b962fa628c992fd8f80151efd7c

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I322c8aa65437abb61385f58b700a06b3e2e22e4f

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ibc15db07c581eca29c1b1fbfb145cee50dc42605

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: If545b3812787cc97b95dbd61ed51c37d30c5d412

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I09fd734510ec7019505263ff0ea381fab36944fa

This change separates building of flash and UART images, so it is possible
to build only one of these images. Also this change allows make to build
them in parallel.

Target mrvl_flash now builds only flash image and mrvl_uart only UART
image. This change reflects it also in the documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ie9ce4538d52188dd26d99dfeeb5ad171a5b818f3

This removes need to move files and also allows to build uart and flash
images in parallel.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I13bea547d7849615e1c1e11d333c8c99e568d3f6

Currently a3700_common.mk makefile builds intermediate files in TF-A top
level directory and also outside of the TF-A tree. This change fixes this
issue and builds all intermediate files in $(BUILD_PLAT) directory.

Part of this change is also removal of 'rm' and 'mv' commands as there is
no need to remove or move intermediate files from outside of the TF-A build
tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72e3a3024bd3fdba1b991a220184d750029491e9

When building WTMI image we need to correctly set DDR_TOPOLOGY and
CLOCKSPRESET variables which WTMI build system expect. Otherwise it use
default values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib83002194c8a6c64a2014899ac049bd319e1652f

This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.

When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Id5e36b7ba3a840cb3598c580e806b52d8e8dd70f

plat: marvell: armada: a3k: Add checks that WTP, MV_DDR_PATH and CRYPTOPP_PATH are correctly defined

These variables must contain a path to a valid directory (not a file) which
really exists. Also WTP and MV_DDR_PATH must point to either a valid Marvell
release tarball or git repository.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1ad80c41092cf3ea6a625426df62b7d9d6f37815

Marvell finally started providing the latest version of mv-ddr-marvell and
A3700-utils-marvell code in master branch of their git repositories.
Reflect this in build instructions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I08d1189dac60eb2a28335c68f611c1da634106f6

* changes:
  Makefile: Fix ${FIP_NAME} to be rebuilt only when needed
  Makefile: Do not mark file targets as .PHONY target

Merge "plat/arm: css: Turn ON/OFF redistributor in sync with GIC CPU interface ON/OFF" into integration

The base address of UART peripheral should be given in R0, not in R1.
Otherwise the console_stm32_core_flush issues an assert message.
This issue was highlighted with recent changes in console flush functions.

Change-Id: Iead01986fdbbf30ad2fd9fa515a1d2b611b4e591
Signed-off-by: Yann Gautier <yann.gautier@st.com>

* changes:
  libc/snprintf: use macro to reduce duplicated code
  libc/snprintf: add support to print "%" character
  libc/printf: add support to print "%" character

To avoid a potential out-of-bounds access, check whether
a device exists on a channel before calling the corresponding
clone function.
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Change-Id: Ia0dd66b331d3fa8a33109a02369e1bc9ae0fdd5b

* changes:
  plat/arm/css/sgi: Fix assert expression issue
  plat/arm/css/sgi: Fix bl32 receive event - 0xC4000061 issue

Violation of MISRA-C Rule 14.4
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I44ef50dadb54fb056a91f3de962b6e63ba6d7ac4

The issue is that, when interrupt is triggered and RAS handler
is entered, after interrupt handler finishes, TF-A will re-enter
bl32 and then crash.
sdei_dispatch_event() may return failing result in some cases,
for example kernel may not have registered a handler or RAS event
may happen early during boot. We restore the NS context when
sdei_dispatch_event() returns failing result.

error log :
Received delegated event
X0 :  0xC4000061
X1 :  0x0
X2 :  0x0
X3 :  0x0
Received event - 0xC4000061 on cpu 0
UnRecognized Event - 0xC4000061
Failed delegated event 0xC4000061, Status Invalid Parameter
Unhandled Exception in EL3.
x30            = 0x000000000401f700
x0             = 0xfffffffffffffffe
x1             = 0xfffffffffffffffe
x2             = 0x00000000600003c0
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I9802e9a32eee0ac3b5a8bcc0362d0b0e3b71dc9f

* changes:
  doc: renesas: Update RZ/G2 code owner list
  plat: renesas: rzg: DT memory node enhancements
  renesas: rzg: emmc: Enable RZ/G2M support
  plat: renesas: rzg: Add HopeRun HiHope RZ/G2M board support
  drivers: renesas: rzg: Add HiHope RZ/G2M board support
  tools: renesas: Add tool support for RZ/G2 platforms

* changes:
  marvell: uart: a3720: Fix macro name for 6th bit of Status Register
  marvell: uart: a3720: Implement console_a3700_core_getc

* changes:
  qemu/qemu_sbsa: add support for sbsa-ref Embedded Controller
  qemu/qemu_sbsa: topology is different from qemu so add handling
  qemu/common : change DEVICE2 definition for MMU
  qemu/aarch64/plat_helpers.S : calculate the position shift

Turn ON/OFF GIC redistributor in sync with GIC CPU interface ON/OFF.

Issue :
The Linux prompt hangs when all the cores in a cluster are turned OFF
and we try to turn ON a core in that cluster. Previously when TF-A turns
ON a core, TF-A first turns ON the redistributor followed by the core.
This did not match the flow when turning OFF a core, as TF-A did not
turn OFF redistributor when the corresponding core[s] are disabled.
This hang is resolved by disabling redistributor as cores are disabled,
keeping them in sync.
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Change-Id: Ifd04fdcfd47b45e00f874f15b098471883d023f0

Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c

Add macro CHECK_AND_PUT_CHAR to check buffer capacity, save one
character to buffer, and then increase character counter by one in one
single statement, so that 4 similar code pieces can be cleaned.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I2add6b4bd6c24ea3c0d2499a44924e3e8db0f4d1

Enable snprintf()/vsnprintf() in TF-A to print "%" character as C
standard, which may be used in platform porting to print percentage
information.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I9b296372a1002046eabac1df5e8eb99a27efd4a8

Enable printf() in TF-A to print "%" character as C standard, which
may be used in platform porting to print percentage information.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I7af2f1d153548e426f423fce15dc48b0da56c622

This allows PSCI in TF-A to signal platform power states to QEMU
via a controller in secure space.

This required a sbsa-ref specific version of PSCI functions for the
platform. Also adjusted the MMU range to also include the new EC.

Add a new MMU region for the embedded controller and increase the
size of xlat tables by one for the new region.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Iece8a88947f11e82ab8988e460a8a66ad175a5ee

sbsa-ref in QEMU creates clusers of 8 cores, it may create up to 512
cores in upto 64 clusters. Implement a qemu_sbsa specific topology file
and increase the BL31_SIZE to accommodate the bigger table sizes. Change
platform_def.h for new topology. Correct PLATFORM_CPU_PER_CLUSTER_SHIFT so
plat_helpers.S calculates correct result.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Idc5d70394c0956b759ad2c86f9fda8f293f2cfa7

DEVICE2 is not currently used on qemu platform but is needed for
a future patch for qemu_sbsa platform. Change its definition to
RW and add it to all levels of arm-tf similar to DEVICE1 definition.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I03495471bfd423b61ad44ec4953fb25f76aa54bf

Rather than re-create this file in multiple qemu variants instead
caclulate the shift needed to convert MPIDR to position.

Add a new PLATFORM_CPU_PER_CLUSTER_SHIFT define in platform_def.h
for both qemu and qemu_sbsa to enable this calculation.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I0e3a86354aa716d95150a3a34b15287cd70c8fd2

The Linux Automation MC-1 is a SBC built around the Octavo Systems
OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and
PMIC. The board has eMMC and a SD slot for storage.

The SDRAM calibration values are taken as is from the DKx boards, which
seem to be suitable for operation at German room temperature.

This is deemed ok for now, but for use in the field, the SiP will likely
need to have its timings determined in a climate chamber.

Change-Id: I5f43a61930151ae9d1df2ea7d0f6f9697c813ce0
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>