GitLab

NXP Central Security Unit(CSU) for NXP SoC.
CSU is used for:
- Access permissions for peripheral that donot have their own
  access control.
- Locking of individual CSU settings until the next POR
- General purpose security related control bits

Refer NXP SoC manuals fro more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I07a4729c79c5e2597f8b2a782e87e09f7f30c2ca

Driver for NXP IP for Power Management Unit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I855657eddab357cb182419b188ed8861c46a1b19

DDR driver for NXP layerscape SoC(s):
 - lx2160aqds
 - lx2162aqds
 - lx2160ardb
 - Other Board with SoC(s) like ls1046a, ls1043a etc;
	-- These other boards are not verified yet.
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic84a63cb30eba054f432d479862cd4d1097cbbaf

NXP I2C driver support for NXP SoC(s).
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I234b76f9fa1b30dd13aa087001411370cc6c8dd0

NXP Security Monitor IP provides hardware anchored
- current security state of the SoC.
- Tamper detect etc.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8ff809fe2f3fd013844ab3d4a8733f53c2b06c81

NXP Security Fuse Processor is used to read and write
fuses.
- Fuses once written, are cannot be un-done.
- Used as trust anchor for monotonic counter,
  different platform keys etc.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I347e806dd87078150fbbbfc28355bb44d9eacb9c

CCN API(s) to be used NXP SoC(s) are added.
These API(s) based on ARM CCN driver
- driver/arm/ccn

CCI API(s) to be used NXP SoC(s) are added.
These API(s) based on ARM CCI driver
- driver/arm/cci
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I7682c4c9bd42f63542b3ffd3cb6c5d2effe4ae0a

NXP TZC-400 API(s) to configure ddr regions are based on:
- drivers/arm/tzc
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I524433ff9fafe1170b13e99b7de01fe957b6d305

NXP Timer Apis are based on:
- drivers/delay_timer
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cbccf4c082a10affee1143390905b9cc99c3382

NXP SoC needs Device Configuration driver to
fetch the current SoC configuration.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ie17cca01a8eb9a6f5feebb093756f577692432bf

NXP SoCs, supports two types of UART controller:
- PL011 - using ARM drivers sources
- 16550 - using TI drivers source
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Iacbcefd2b6e5d96f83fa00ad25b4f63a4c822bb4