GitLab

As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0

As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8

The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.

The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.

Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installation.

Add some ASCII art about the layout of our virtual memory map, which
uses a non-trivial condensed virtual address space.

Change-Id: Iaaa79b4366012394e15e4c1b26c212b5efb6ed6a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Added GIC600AE FVP model version information.

Change-Id: I15d25fbdb8e09900976d5993032ec049f8db79f2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Add blank lines before lists and code example.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I901646e0be74227af983079d0cbe05c6a217fab6

Added a build option 'FVP_GICR_REGION_PROTECTION' to make
redistributor frame of fused/unused cores as read only.

Change-Id: Ie85f86e2465b93321a92a888ce8712a3144e4ccb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example how to build production release of Marvell firmware image

ESPRESSObin-Ultra TF-A build example was now just a copy+paste of previous
mentioned example. It produced debug binary with custom log level, which
was not described. So rather replace this duplicate build example by a full
example with all steps how to build production release of Marvell firmware
image for EspressoBin with 1GHz CPU and 1GB DDR4 RAM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ief1b8bc96a3035ebd8421bd68dca5eb5c8d8fd52

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I192acab2a7f42cd80069faeac2d7823a05558dc6

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5310c30051703bbf9f377762a00eb6a8188c6fa1

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I96c2d9d5bc6c69a1a66a29bf586a23375d63ab5a

Reformat list of boards, remove unsupported OcteonTX2 and mention
supported Turris MOX board.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I22cea7f77fd078554c7f0ed4108781626209e563

Default WTMI_IMG value was documented incorrectly. Also WTMI_IMG name may
be misleading as this option does not specify full WTMI image, just a main
loop (e.g. fuse.bin or custom RTOS image) without hardware initialization
code (DDR, CPU and clocks).
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I3de4a27ce2165b962fa628c992fd8f80151efd7c

Information is taken from the post https://lists.denx.de/pipermail/u-boot/2017-July/299351.html

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5f608e135ec56685a3e2b986a52670540d48a4bf

This change separates building of flash and UART images, so it is possible
to build only one of these images. Also this change allows make to build
them in parallel.

Target mrvl_flash now builds only flash image and mrvl_uart only UART
image. This change reflects it also in the documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ie9ce4538d52188dd26d99dfeeb5ad171a5b818f3

This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.

When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Id5e36b7ba3a840cb3598c580e806b52d8e8dd70f

Marvell finally started providing the latest version of mv-ddr-marvell and
A3700-utils-marvell code in master branch of their git repositories.
Reflect this in build instructions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I08d1189dac60eb2a28335c68f611c1da634106f6

Fix some typos and misspellings in TF-A documentation.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: Id72553ce7b2f0bed9821604fbc8df4d4949909fa

The supported MARVELL_PLATFORM list is updated to include the recently added
a80x0_puzzle platform (IEI Puzzle-M801).

Additionally building instructions are added for the GST ESPRESSObin-Ultra
board (1 GB, DDR4 RAM variant), which has been tested successfully and booted
TF-A on the board.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Change-Id: Ie5724df27c1ee2e8f6a52664520579e872471e93

Document the platforms based on RZ/G2 SoC's.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I9ce5b9df3573b1198c5c7be79b5471d54573609a

Move RD-V1 platform to use version of FVP_RD_Daniel from 11.10 build 36
to 11.13 build 10
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I9622c03d342bb780234dec8ffe4ab11d8069acab

Introduce a new build option CM3_SYSTEM_RESET for A3700 platform, which,
when enabled, adds code to the PSCI reset handler to try to do system
reset by the WTMI firmware running on the Cortex-M3 secure coprocessor.
(This function is exposed via the mailbox interface.)

The reason is that the Turris MOX board has a HW bug which causes reset
to hang unpredictably. This issue can be solved by putting the board in
a specific state before reset.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3f60b9f244f334adcd33d6db6a361fbc8b8d209f

This adds documentation for device tree build flag OPTEE_SP_FW_CONFIG.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ie45f075cf04182701007f87aa0c8912cd567157a

Updated the list of supported FVP platforms with support for RD-N2 FVP.

Change-Id: I861bbb6d520c20e718f072e118c66dab61fe1386
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Also add example how to build TF-A for A3720 Turris MOX board and also fix
style/indentation issues and information about default values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2dc957307b1b627b403a8d960e85f5ac9e15aee5

After introducing the new STM32MP1 SoC versions in patch [1], the
document describing STM32MP1 platform is updated with the information
given in the patch commit message.

 [1]: stm32mp1: add support for new SoC profiles

Change-Id: I6d7ce1a3c29678ddac78a6685f5d5daf28c3c3a1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Add information about 2GB variant of EspressoBin V5 and use Marvell git
branches which contain required fixes for EspressoBin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1db510f1576f4762259ad7b0c10024b8ab434a59

Now that the BLE image sources (mv_ddr) are updated, reflect
the proper branch in the Armada build howto.

Change-Id: I959d1343d0dfdd681c7e39bdcaed9b36aaddfca1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Morello platform has a SCP which brings the primary Rainier CPU
out of reset which starts executing at BL31.

This patch provides documentation support for Morello platform.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I38f596668e2b14862d543fabc04549ff34bfb8a2

Updated the list of supported FVP platform as per latest
FVP platform release.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I45ef79aff147ed598a3a92ab6f6b277f7f70604a

stm32mp15_optee_defconfig has been dropped from U-Boot as it became
identical to stm32mp15_trusted_defconfig.

Furthermore give a hint how OP-TEE is supposed to be installed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Id8f0bd84a87e3a62072dd4405aadddcdd3511213

As the Arm Ltd. FPGA port is now working for all existing images, add
some documentation file.

Change-Id: I9e2c532ed15bbc121bb54b3dfc1bdfee8f1443a6
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.

Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>

Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a

SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.

This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.

Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Adding support for QTI CHIP SC7180 on ATF

Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>

These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build

A sample broken link is reported as follows:
(line   80) -local-   firmware-design.rst#secure-el1-payloads-and-dispatchers

Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

- Add basic platform setup
- Add mt8192 documentation at docs/plat/
- Add generic CPU helper functions
- Add basic register address

Change-Id: Ife34622105404a8227441aab939e3c55c96374e9
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.

Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb