GitLab

This patch resets the power state info for CPUs when onlining,
as we set deepest power when offlining a core but that may not
be requested by non-secure sw which controls idle states. It
will re-init this info from non-secure software when the core
come online.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: Id6c2fa2b821c7705aafbb561a62348c36fd3abd8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.

Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the programming sequence for 'System Suspend' and
'Quasi power down' state entry. The device needs to update the
required power state before querying the MCE firmware to see the
entry to that power state is allowed.

Original change by Allen Yu <alleny@nvidia.com>

Change-Id: I65e03754322188af913fabf41f29d1c3595afd85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs the default CPU wake mask during CPU_SUSPEND. This
reduces the CPU_SUSPEND latency as the system has to send one less SMC
before issuing the actual suspend request.

Original change by Krishna Sitaraman <ksitaraman@nvidia.com>

Change-Id: I1f9351dde4ab30936070e9f42c2882fa691cbe46
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the system cstate when offlining a CPU core as we
need to update the sytem cstate to SC7 only when we enter system
suspend.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: I1cff9bbab4db7d390a491c8939aea5db6c6b5c59
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.

LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.

Original change by Guy Sotomayor <gsotomayor@nvidia.com>

Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.

In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.

Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.

Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.

Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the SC8 system power off state. This
state keeps the sensor subsystem powered ON while powering down
the remaining parts of the SoC. The CPUs and DRAM are powered down
as part of this state entry and perform a cold boot when exiting SC8.

Change-Id: Iba65c661a7fe077a0d696f114bab3b4595e19a0d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables the DCO operations when we turn OFF a
CPU. DCO operations are still ON when a CPU enters a power
down suspend state.

Change-Id: I954a800209ffcc9ab43a77f04040608cbbbd9055
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.

Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The GPU is the real consumer of the video protected memory region
and it needs to be in reset to pick up the new region.

This patch checks if the GPU is in reset before we program the new
video protected memory region settings.

Change-Id: I44f553bfcf07b1975abad53b245954be966c8aeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the logic used to calculate the CPU index for
storing the per-cpu wake times. We use the MIDR register to
calculate the CPU index now. This allows us to store values for
Denver/A57 CPUs properly.

Change-Id: I9df0377afd4b92bbdaea495c0df06a9780a99d09
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch supports the TEGRA_SIP_NEW_VIDEOMEM_REGION SiP call to
program new video memory carveout settings from the NS world.

Change-Id: If9ed818fe71e6cb7461f225090105a4d8883b7a2
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.

The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.

Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the newer platform handler functions. Commit
I6db74b020b141048b6b8c03e1bef7ed8f72fd75b merges the upstream code which
has already moved all the upstream supported platforms over to these
handler functions.

Change-Id: I621eff038f3c0dc1b90793edcd4dd7c71b196045
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements the 'prepare_system_reset' handler to
issue the 'system reset' command to the MCE.

Change-Id: I83d8d0b4167aac5963d640fe77d5754dc7ef05b1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements the CPU_OFF handler for powering down
a CPU using the MCE driver.

Change-Id: I8d455005d0b547cc61cc7778bfe9eb84b7e5480c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The System Counter Frequency has been updated to 31.25MHz after
some experiments as the previous value was too high.

Change-Id: I79986ee1c0c88700a3a2b1dbff2d3f00c0c412b9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 has an on-die, 320KB, "System RAM" memory. Out of the total
size, 256KB are allocated for the CPU TrustZone binaries - EL3 monitor
and Trusted OS.

This patch changes the base address for bl31.bin to the SysRAM base
address. The carveout is too small for the Trusted OS, so we relocate
only the monitor binary.

Change-Id: Ib4b667ff2a7a619589851338f9d0bfb02078c575
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch issues the 'System Off' ARI to power off the entire
system from the 'prepare_system_off' handler.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch add code to power on/off the secondary CPUs on the Tegra186
chip. The MCE block is the actual hardware that takes care of the
power on/off sequence. We pass the constructed CPU #, depending on the
MIDR_IMPL field, to the MCE CPU handlers.

This patch also programs the reset vector addresses to allow the
CPUs to power on through the monitor and then jump to the linux
world.

Change-Id: Idc164586cda91c2009d66f3e09bf4464de9662db
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the new SiP SMC calls to allow the NS world to
interact with the MCE hardware block on Tegra186 chips.

Change-Id: I79c6b9f76d68a87abd57a940613ec070562d2eac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.

There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.

MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.

Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 is the newest SoC in the Tegra family which consists
of two CPU clusters - Denver and A57. The Denver cluster hosts
two next gen Denver15 CPUs while the A57 cluster hosts four ARM
Cortex-A57 CPUs. Unlike previous Tegra generations, all the six
cores on this SoC would be available to the system at the same
time and individual clusters can be powered down to conserve
power.

Change-Id: Id0c9919dbf5186d2938603e0b11e821b5892985e
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The NVidia Tegra 210 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.

Enable the workaround that TF provides to fix this erratum.

Change-Id: I6cef4ac60ae745e9ce299ee22c93b9d2c4f6c5f2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This patch enables the following erratas for the Tegra210 SoC:

* Cortex-A57
=============
- A57_DISABLE_NON_TEMPORAL_HINT
- ERRATA_A57_826974
- ERRATA_A57_826977
- ERRATA_A57_828024
- ERRATA_A57_829520
- ERRATA_A57_833471

* Cortex-A53
=============
- A53_DISABLE_NON_TEMPORAL_HINT
- ERRATA_A53_826319
- ERRATA_A53_836870

Tegra210 uses Cortex-A57 revision: r1p1 and Cortex-A53 revision: r0p2.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The linux kernel v3.10 does not use System Suspend function ID, whereas
v4.4 uses it. This means affinity levels 0/1 will have different state id
values during System Suspend entry. This patch updates the assert criteria
to check both the state id values.

Change-Id: I07fcaf99501cc9622e40d0a2c1eb4a4a160be10a
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies the TZDRAM base address to the new aperture
allocated by the bootloader.

Change-Id: Id158d15b1ec9aa681136d258e90fbba930aebf92
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sets the core power state during cluster power down,
so that the 'get_target_pwr_state' handler can calculate the
proper states for all the affinity levels.

Change-Id: If4adb001011208916427ee1623c6c923bed99985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.

This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.

Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses the Memory controller driver's handler to restore
its settings and moves the other chip specific code to their own
'pwr_domain_on_finish' handlers.

Change-Id: I3c9d23bdab9e2e3c05034ff6812cf941ccd7a75e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the code to disable DCO operations out from common
CPU files. This allows the platform code to call thsi API as and
when required. There are certain CPU power down states which require
the DCO to be kept ON and platforms can decide selectively now.

Change-Id: Icb946fe2545a7d8c5903c420d1ee169c4921a2d1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the PSCI_EXTENDED_STATE_ID macro. Tegra platforms
have moved on to using the extended state ID for CPU_SUSPEND, where
the NS world passes the state ID and wakeup time as part of the
state ID field.

Change-Id: Ie8b0fec285d8b2330bc26ff239a4f628425c9fcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements a handler for common SiP calls. A weak
implementation for the SoC-specific handler has been provided
which can be overridden by SoCs to implement any custom SiP
calls.

Change-Id: I45122892a84ea35d7b44be0f35dc15f6bb95193e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.

This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.

Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames the current Memory Controller driver files to
"_v1". This is done to add a driver for the new Memory Controller
hardware (v2).

Change-Id: I668dbba42f6ee0db2f59a7103f0ae7e1d4684ecf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>