- 16 Jan, 2020 2 commits
-
-
Hadi Asyrafi authored
Add bridge enablement features for each platform. The bridge access will be enabled automatically for FPGA 1st configuration only. Signed-off-by:Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com> Change-Id: I264757b257a209e1c3c4206660f21c5d67af0d2f
-
Hadi Asyrafi authored
Combine both peripheral and bridge non-secure access code into a single callable function Signed-off-by:
-
- 09 Jan, 2020 1 commit
-
-
Madhukar Pappireddy authored
In further patches, we wish to enable -wredundant-decls check as part of warning flags by default. Change-Id: I43410d6dbf40361a503c16d94ccf0f4cf29615b7 Signed-off-by:Madhukar Pappireddy <madhukar.pappireddy@arm.com>
-
- 30 Dec, 2019 1 commit
-
-
Hadi Asyrafi authored
Increase calibration delay to cater for HPS 1st mode and reduce clear emif delay which takes too long Signed-off-by:
-
- 17 Dec, 2019 2 commits
-
-
Hadi Asyrafi authored
Add-in support for handling BL31 parameter from non-BL2 image, ie. SPL Signed-off-by: -
Hadi Asyrafi authored
This patch will provide an entrypoint for uboot's spl into BL31. BL31 will also handle secondary cpu state during uboot's cold boot Signed-off-by:
-
- 12 Dec, 2019 1 commit
-
-
Hadi Asyrafi authored
remove plat_sip_svc.c and plat_psci.c in stratix 10 platform directory as both has been refactored to common directory for sharing with agilex platform Signed-off-by:
-
- 28 Nov, 2019 5 commits
-
-
Hadi Asyrafi authored
Removes unused source code for BL2 and BL31 in platform.mk. Clean-up unused header files, syntax fixes, and alphabetical sorting post-refactoring Signed-off-by: -
Hadi Asyrafi authored
Pull out SiP & PSCI service driver into socfpga common directory. Remove deassert_peripheral_reset from cold reset procedure as it is not needed. Signed-off-by: -
Hadi Asyrafi authored
Pull out mailbox driver into common area as they can be shared between intel's socfpga platform Signed-off-by: -
Hadi Asyrafi authored
Share socfpga private definitions and storage driver between Agilex and Stratix 10 platform. Signed-off-by: -
Hadi Asyrafi authored
Pull out handoff driver to intel/soc/ common directory as they can be shared by both Agilex and Stratix10 platform. Share platform_def header between both Agilex and Stratix10 and store platform specific definitions in socfpga_plat_def.h Signed-off-by:
-
- 13 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Extract clock information for UART, MMC & Watchdog from the platform rather than hard code it Signed-off-by:
-
- 07 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Pull out common code from aarch64 and include Signed-off-by:
-
- 02 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Previous config blocks ATF runtime service communications with SDM mailbox Signed-off-by:
-
- 01 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Pull out common code from agilex and stratix10 Signed-off-by:
-
- 11 Jul, 2019 1 commit
-
-
Justin Chadwell authored
This consists of ensuring that the left operand of each shift is unsigned when the operation might overflow into the sign bit. Change-Id: I4c7a315cb18b3bbe623e7a7a998d2dac869638a7 Signed-off-by:Justin Chadwell <justin.chadwell@arm.com>
-
- 10 Jul, 2019 1 commit
-
-
Tien Hock, Loh authored
MMC sample select needs to be set properly so that DWMMC clock can be driven to 50Mhz Signed-off-by:Tien Hock, Loh <tien.hock.loh@intel.com> Change-Id: I4a1dde4f6a1e78a36940c57a7a5b162be0bd443a
-
- 28 Jun, 2019 1 commit
-
-
Ambroise Vincent authored
The new API becomes the default one. Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec Signed-off-by:Ambroise Vincent <ambroise.vincent@arm.com>
-
- 26 Jun, 2019 1 commit
-
-
Hadi Asyrafi authored
Signed-off-by:
-
- 21 Mar, 2019 1 commit
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Watchdog driver support & enablement during platform setup Signed-off-by:
-
- 13 Mar, 2019 2 commits
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Manages QSPI initialization, configuration and IO handling as boot device Signed-off-by: -
Muhammad Hadi Asyrafi Abdul Halim authored
To support the enablement of QSPI booting Signed-off-by:
-
- 08 Mar, 2019 2 commits
-
-
Tien Hock, Loh authored
MMC stack needs OCR voltage information for the platform to initialize MMC controller correctly. Signed-off-by: -
Tien Hock, Loh authored
MMC stack needs OCR voltage information for the platform to initialize MMC controller correctly. Signed-off-by:
-
- 07 Mar, 2019 2 commits
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Change map region for device 2 from non-secure to secure Signed-off-by: -
Tien Hock, Loh authored
We should be using zeromem to scrub memory instead of memset. This would improve the performance by 200x Signed-off-by:
-
- 26 Feb, 2019 1 commit
-
-
Tien Hock, Loh authored
This adds BL31 support to Intel Stratix10 SoCFPGA platform. BL31 in TF-A supports: - PSCI calls to enable 4 CPU cores - PSCI mailbox calls for FPGA reconfiguration Signed-off-by:
-
- 13 Feb, 2019 1 commit
-
-
Loh Tien Hock authored
A DDR calibration value is missing write mask, causing ECC DDR calibration to fail. This patch addresses the issue. ECC should also be scrubbed before MMU initializes, thus the scrubbing is moved to ddr intialization phase. Signed-off-by:
-
- 04 Feb, 2019 1 commit
-
-
Loh Tien Hock authored
This adds BL2 support for Intel Stratix 10 SoC FPGA. Functionality includes: - Release and setup peripherals from reset - Calibrate DDR - ECC DDR Scrubbing - Load FIP (bl31 and bl33) Signed-off-by:
-
