GitLab

* changes:
  gic/gic600: add support for multichip configuration
  plat/arm/gicv3: add support for probing multiple GIC Redistributor frames

N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link, for now only dual-chip
is supported.

Whether or not multiple chips are present is dynamically probed by
SCP firmware and passed on to TF-A, routing table will be set up
only if multiple chips are present.

Initialize GIC-600 multichip operation by overriding the default GICR
frames with array of GICR frames and setting the chip 0 as routing
table owner.

Change-Id: Ida35672be4bbf4c517469a5b330548d75e593ff2
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Add support to configure GIC-600's multichip routing table registers.
Introduce a new gic600 multichip structure in order to support platforms
to pass their GIC-600 multichip information such as routing table owner,
SPI blocks ownership.

This driver is currently experimental and the driver api may change in
the future.

Change-Id: Id409d0bc07843e271ead3fc2f6e3cb38b317878d
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

ARM platform can have a non-contiguous GICR frames. For instance, a
multi socket platform can have two or more GIC Redistributor frames
which are 4TB apart. Hence it is necessary for the `gicv3_rdistif_probe`
function to probe all the GICR frames available in the platform.

Introduce `plat_arm_override_gicr_frames` function which platforms can
use to override the default gicr_frames which holds the GICR base
address of the primary cpu.

Change-Id: I1f537b0d871a679cb256092944737f2e55ab866e
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Instead of retry polling, timer of 1ms is used to poll
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I7e028dc68138d2888e3cf0cbed744f5e6bc6ff42

* changes:
  n1sdp: update platform macros for dual-chip setup
  n1sdp: introduce platform information SDS region

N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link  for now only dual-chip is
supported.

A single instance of TF-A runs on master chip which should be aware of
slave chip's CPU and memory topology.

This patch updates platform macros to include remote chip's information
and also ensures that a single version of firmware works for both single
and dual-chip setup.

Change-Id: I75799fd46dc10527aa99585226099d836c21da70
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Platform information structure holds information about platform's DDR
size(local/remote) which will be used to zero out the memory before
enabling the ECC capability as well as information about multichip
setup. Multichip and remote DDR information can only be probed in SCP,
SDS region will be used by TF-A to get this information at boot up.

This patch introduces a new SDS to store platform information, which is
populated dynamically by SCP Firmware.previously used mem_info SDS is
also made part of this structure itself.

The platform information is also passed to BL33 by copying it to Non-
Secure SRAM.

Change-Id: I4781dc6a7232c3c0a3219b164d943ce9e3e469ee
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Running TF-A from non-standard location such as DRAM is useful for some
SRAM heavy use-cases. Allow the TF-A binary to be executed from an
arbitrary memory location.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Icd97926e4d97f37d7cde4a92758a52f57d569111

Some of the plantuml diagrams in the I/O storage abstraction layer
documentation are absent from the rendered version of the porting
guide. The build log (see [1] for example) reports a syntax error in
these files. This is due to the usage of the 'order' keyword on the
participants list, which does not seem to be supported by the version
of plantuml installed on the ReadTheDocs server.

Fix these syntax errors by removing the 'order' keyword altogether. We
simply rely on the participants being declared in the desired order,
which will be the order of display, according to the plantuml
documentation.

[1] https://readthedocs.org/api/v2/build/9870345.txt



Change-Id: Ife35c74cb2f1dac28bda07df395244639a8d6a2b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

A small set of misc changes to ensure correctness before the v2.2
release tagging.

Change-Id: I888840b9483ea1a1633d204fbbc0f9594072101e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Removed deprecated interfaces that have been removed from the TF-A
project, updated the deprecated list with new deprecations for v2.2
Release, added upcoming release information, remove mentions of PR from
github.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Change-Id: I2b59d351cde9860ad0dcb6520a8bd2827ad403cf

Giving a bit more background information about the issue tracker
and mailing lists.

Change-Id: I68921d54e3113d348f1e16c685f74d32df2ca19f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I53a7706016539e7de7fdbe87b786d99665bbe1d8

The list of upstream platforms on the index page is growing
quite long, especially with all the FVP variants being listed
individually.

This patch leverages the "Platform Ports" chapter in the docs
table of contents to condense this information. Almost all
platform ports now have documentation, so the table of
contents serves as the list of upstream platforms by itself.

For those upstream platforms that do not have corresponding
documentation, the top-level "Platform Ports" page mentions
them individually. It also mentions each Arm FVP, just as
the index page did before.

Note that there is an in-progress patch that creates new
platform port documentation for the Arm Juno and Arm FVP
platforms, so this list of "other platforms" will soon be
reduced further as those platforms become part of the
table of contents as well.

Change-Id: I6b1eab8cba71a599d85a6e22553a34b07f213268
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The index.rst page is now the primary landing page for the TF-A
documentation. It contains quite a lot of content these days,
including:

- The project purpose and general intro
- A list of functionality
- A list of planned functionality
- A list of supported platforms
- "Getting started" links to other documents
- Contact information for raising issues

This patch creates an "About" chapter in the table
of contents and moves some content there. In order,
the above listed content:

- Stayed where it is. This is the right place for it.
- Moved to About->Features
- Moved to About->Features (in subsection)
- Stayed where it is. Moved in a later patch.
- Was expanded in-place
- Moved to About->Contact

Change-Id: I254bb87560fd09140b9e485cf15246892aa45943
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

There are some platforms which uses MPIDR Affinity level 3 for storing
extra affinity information e.g. N1SDP uses it for keeping chip id in a
multichip setup, for such platforms MPIDR validation should not fail.

This patch adds Aff3 bits also as part of mpidr validation mask, for
platforms which does not uses Aff3 will not have any impact as these
bits will be all zeros.

Change-Id: Ia8273972fa7948fdb11708308d0239d2dc4dfa85
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Explicitly disable stack protection via the "-fno-stack-protector"
compiler option when the ENABLE_STACK_PROTECTOR build option is
set to "none" (the default).

This allows the build to complete without link errors on systems where
stack protection is enabled by default in the compiler.

Change-Id: I0a676aa672815235894fb2cd05fa2b196fabb972
Signed-off-by: Simon South <simon@simonsouth.net>

The WARMBOOT_ENABLE_DCACHE_EARLY allows caches to be turned on early during
the boot. But the xlat_change_mem_attributes_ctx() API did not do the required
cache maintenance after the mmap tables are modified if
WARMBOOT_ENABLE_DCACHE_EARLY is enabled. This meant that when the caches are turned
off during power down, the tables in memory are accessed as part of cache
maintenance for power down, and the tables are not correct at this point which
results in a data abort.
This patch removes the optimization within xlat_change_mem_attributes_ctx()
when WARMBOOT_ENABLE_DCACHE_EARLY is enabled.
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I82de3decba87dd13e9856b5f3620a1c8571c8d87

We would need to update this version for the release but, in fact,
it is not required for our publishing workflow; the hosted version
of the docs uses git commit/tag information in place of these
variables anyway.

Instead of updating the version, just remove these variables
entirely.

Change-Id: I424c4e45786e87604e91c7197b7983579afe4806
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

User guide:
1. Remove obsolete note saying only FVP is supported with AArch32
2. Switch compiler for Juno AArch32 to arm-eabi
3. Mention SOFTWARE folder in Juno Linaro release

Index.rst:
1. Switch default FVP model to Version 11.6 Build 45
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ib47a2ea314e2b8394a20189bf91796de0e17de53

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ia03701e2e37e3a00a501b144960a4a65aedbfde9