Skip to content

GitLab

Switch branch/tag
  1. 14 Jul, 2017 1 commit
    • Jorge Ramirez-Ortiz's avatar
      Poplar: Initial commit for Poplar E-96Boards · e35d0edb
      Jorge Ramirez-Ortiz authored 
      The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.

SOC  Hisilicon Hi3798CV200
CPU  Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB  Two USB 2.0 ports One USB 3.0 ports
CONSOLE  USB-micro port for console support
ETHERNET  1 GBe Ethernet
PCIE  One PCIe 2.0 interfaces
JTAG  8-Pin JTAG
EXPANSION INTERFACE  Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI  802.11AC 2*2 with Bluetooth
CONNECTORS  One connector for Smart Card One connector for TSI

The platform boot sequence is as follows:
    l-loader --> arm_trusted_firmware --> u-boot

Repositories:
 - https://github.com/Linaro/poplar-l-loader.git
 - https://github.com/Linaro/poplar-u-boot.git



U-Boot is also upstream in the project's master branch.

Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).

Build Line:
make CROSS_COMPILE=aarch64-linux-gnu-  all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin
Signed-off-by: default avatarJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Tested-by: default avatarJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: default avatarLeo Yan <leo.yan@linaro.org>
Tested-by: default avatarAlex Elder <elder@linaro.org>
      e35d0edb
  3. 12 Jul, 2017 5 commits
  5. 11 Jul, 2017 1 commit
  7. 10 Jul, 2017 1 commit
  9. 20 Jun, 2017 1 commit
  11. 19 Jun, 2017 1 commit
    • Leo Yan's avatar
      plat: Hikey960: fix the CPU hotplug · 0aedca71
      Leo Yan authored 
      

In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.

This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: default avatarTao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      0aedca71
  13. 15 Jun, 2017 1 commit
  15. 14 Jun, 2017 1 commit
  17. 13 Jun, 2017 1 commit
  19. 07 Jun, 2017 4 commits
  21. 31 May, 2017 4 commits
  23. 24 May, 2017 3 commits