GitLab

* changes:
  zynqmp: pm: clock: Move custom flags to typeflags
  zynqmp: pm: clock: Add support for custom type flags
  plat: xilinx: zynqmp: Add GET_CALLBACK_DATA function
  zynqmp: pm: Remove CLK_TOPSW_LSBUS from invalid clock list

UEFI decompression will fail if the payload size is too large and the load
address is too low. This patch moves the payload to a higher address to fix
the issue
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I36087fbd2237b62891c59dbe2d34336bddfaa396

All function in socfpga_sip_svc.c should only be called locally except
sip_smc_handler().
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib84ef9a2e521967baa4cfd32e6bc569dd3a5d2f5

Now that there is plenty of space (32 KiB) available for NOBITS
sections, we can afford using an entire page for coherent memory. In
fact, because it simplifies the code, this is a beneficial change for
loaded image (.text) size, where we are still close to the size limit.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I0b899dabcb162015c63b0e4aed0869569c889ed9

Implements a way to add platform specific power off code to a
Marvell Armada 8K platform.

Marvell Armada 8K boards can now add a board/system_power.c file
that contains a system_power_off() function.
This function can now send a command to a power management MCU or
other board periferals before shutting the board down.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: Iaba20bc2f603195679c54ad12c0c18962dd8e3db
---
I am working on a device that will be ported later, which has a
custom power management MCU that handles LEDs, board power and fans
and requires this separation.

Add missing #address-cells and #size-cells into generated DT, otherwise
the DT is invalid. While the parsers thus far handled this correctly via
various fallbacks, this is not applicable in the long run, so fix this.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ic808a3b27b93e5258ec1a19acc3d593e53625c15

Existing implementation does not allow to change the value of the
DIV1 because DIV2 does not have SET_RATE_PARENT flag.
This causes DIV1 value to be fixed and only value of DIV2 will be
adjusted according to required clock rate.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic6c4ca091bf0c5dc91ebddf86621c82c705dc87b

Linux expects custom flags in type flags. So move
custom flags to type flags instead of providing
them to clock core flags.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I668a8084d966815a9d9e86c2b18ecb5b18cb6b78

Add support to add extra custom type flags and provide
to caller in topology query.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id9cc065dbadfed2291dd4f62674d7838da4cdf40

Add GET_CALLBACK_DATA function again as now Linux driver
supports both mailbox as well as ISR method.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb99d61976e1cb718fcd1021d9cf4958e7556c81

* changes:
  intel: Implement platform specific system reset 2
  intel: Enable SiP SMC secure register access

Merge "uniphier: call uniphier_scp_is_running() only when on-chip STM is supported" into integration

It's in fact mandatory. Seen with RPi firmware 1.20190925.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I80739b74f25817294adc52cfd26a3ec59c06f892

* changes:
  zynqmp: pm: Add LPD WDT clock to the pm_clock structure
  zynqmp: pm: Fix clock models and IDs of GEM-related clocks
  zynqmp: pm: Rename FPD WDT clock ID
  plat: xilinx: zynqmp: Correct syscnt freq for QEMU
  arm64: zynqmp: Add idcodes for new RFSoC silicons ZU48DR and ZU49DR
  arm64: zynqmp: Add id for new RFSoC device ZU39DR

* changes:
  Tegra194: drivers: fix violations of MISRA Rule 21.1
  Tegra: include: fix violations of MISRA Rule 21.1

This patch removes un-needed r/w parameter checks for qspi driver. The
driver can actually access any offset and size.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If60b2c016aa91e2c24ddc57c6ad410c8dc5dcf53

This patch fixes the violations of Rule 21.1 from all the
header files.

Rule 21.1 "#define and #undef shall not be used on a reserved
           identifier or reserved macro name"
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I12e17a5d7158defd33b03416daab3049749905fc

This patch fixes the violations of Rule 21.1 from all the
Tegra common header files.

Rule 21.1 "#define and #undef shall not be used on a reserved
           identifier or reserved macro name"
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I2e117645c110e04c13fa86ebbbb38df4951d2185

This toolchain provides multiple cross compilers and are publicly
available on developer.arm.com

We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)

Change-Id: I910200174d5bad985504d1af4a1ae5819b524003
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

NOTE for platform integrators:
   API `plat_psci_stat_get_residency()` third argument
   `last_cpu_idx` is changed from "signed int" to the
   "unsigned int" type.

Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.

2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent

Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.

Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c