Skip to content

GitLab

Switch branch/tag
  1. 28 Jun, 2019 1 commit
  3. 26 Jun, 2019 1 commit
  5. 05 Jun, 2019 1 commit
    • James kung's avatar
      Prevent pending G1S interrupt become G0 interrupt · acc29852
      James kung authored 
      

According to Arm GIC spec(IHI0069E, section 4.6.1),
when GICD_CTLR.DS == 0, Secure Group 1 interrupts
are treated as Group 0 by a CPU interface if:
- The PE does not implement EL3.
- ICC_SRE_EL1(S).SRE == 0

When a cpu enter suspend or deep idle, it might be
powered off. When the cpu resume, according to
the GIC spec(IHI0069E, section 9.2.15, 9.2.16 and
9.2.22) the ICC_SRE_EL1.SRE reset value is 0 (if
write is allowed) and G0/G1S/G1NS interrupt of the
GIC cpu interface are all disabled.

If a G1S SPI interrupt occurred and the target cpu
of the SPI is assigned to a specific cpu which is
in suspend and is powered off, when the cpu resume
and start to initial the GIC cpu interface, the
initial sequence might affect the interrupt group
type of the pending interrupt on the cpu interface.

Current initial sequence on the cpu interface is:
1. Enable G0 interrupt
2. Enable G1S interrupt
3. Enable ICC_SRE_EL1(S).SRE

It is possible to treat the pending G1S interrupt
as G0 interrupt on the cpu interface if the G1S
SPI interrupt occurred between step2 and step3.

To prevent the above situation happend, the initial
sequence should be changed as follows:
1. Enable ICC_SRE_EL1(S).SRE
2. Enable G0 interrupt
3. Enable G1S interrupt

Change-Id: Ie34f6e0b32eb9a1677ff72571fd4bfdb5cae25b0
Signed-off-by: default avatarJames Kung <kong1191@gmail.com>
      acc29852
  7. 23 May, 2019 1 commit
  9. 10 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: Abort DMA transactions · 1461ad9f
      Alexei Fedorov authored 
      

For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.

Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      1461ad9f
  11. 03 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: refactor the driver code · ccd4d475
      Alexei Fedorov authored 
      

This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.

Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      ccd4d475
  13. 17 Apr, 2019 1 commit
  15. 03 Apr, 2019 2 commits
  17. 01 Apr, 2019 1 commit
  19. 13 Mar, 2019 1 commit
  21. 28 Feb, 2019 1 commit
  23. 19 Feb, 2019 1 commit
  25. 04 Feb, 2019 1 commit
    • Soby Mathew's avatar
      GICv3: Allow probe for fewer GICR interfaces than exposed by the frame · 5dc2c3f9
      Soby Mathew authored 
      

Previously the GICv3 redistributor probe function
(gicv3_rdistif_base_addrs_probe()) asserted that the number of
per-CPU redistributor interfaces expected to be probed by the
platform is equal to the number exported by the redistributor
frame. This is a problem in case the number of CPUs in the
platform is less than the number of redistributor interfaces
in the frame. Hence this patch removes the assertion check
and allows probe for fewer redistributor interfaces as required
by the platform.

Change-Id: I3449763a3ad70817224442cbe184d001030c9874
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      5dc2c3f9
  27. 25 Jan, 2019 6 commits
  29. 15 Jan, 2019 1 commit
    • Paul Beesley's avatar
      Correct typographical errors · 8aabea33
      Paul Beesley authored 
      

Corrects typos in core code, documentation files, drivers, Arm
platforms and services.

None of the corrections affect code; changes are limited to comments
and other documentation.

Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      8aabea33
  31. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored 
      Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
  33. 12 Dec, 2018 1 commit
  35. 07 Dec, 2018 1 commit
    • Julius Werner's avatar
      drivers/console: Link console framework code by default · 985ee0b7
      Julius Werner authored 
      

This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.

To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.

Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      985ee0b7
  37. 05 Dec, 2018 1 commit
  39. 04 Dec, 2018 1 commit
  41. 23 Nov, 2018 1 commit
  43. 21 Nov, 2018 1 commit
  45. 08 Nov, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Standardise header guards across codebase · c3cf06f1
      Antonio Nino Diaz authored 
      

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c3cf06f1
  47. 06 Nov, 2018 1 commit
  49. 23 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      tzc: Fix MISRA defects · af6491f8
      Antonio Nino Diaz authored 
      

The definitions FAIL_CONTROL_*_SHIFT were incorrect, they have been
fixed.

The types tzc_region_attributes_t and tzc_action_t have been removed and
replaced by unsigned int because it is not allowed to do logical
operations on enums.

Also, fix some address definitions in arm_def.h.

Change-Id: Id37941d76883f9fe5045a5f0a4224c133c504d8b
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      af6491f8
  51. 19 Oct, 2018 1 commit
    • Soby Mathew's avatar
      Multi-console: Deprecate the `finish_console_register` macro · cc5859ca
      Soby Mathew authored 
      

The `finish_console_register` macro is used by the multi console
framework to register the `console_t` driver callbacks. It relied
on weak references to the `ldr` instruction to populate 0 to the
callback in case the driver has not defined the appropriate
function. Use of `ldr` instruction to load absolute address to a
reference makes the binary position dependant. These instructions
should be replaced with adrp/adr instruction for position independant
executable(PIE). But adrp/adr instructions don't work well with weak
references as described in GNU ld bugzilla issue 22589.

This patch defines a new version of `finish_console_register` macro
which can spcify which driver callbacks are valid and deprecates the
old one. If any of the argument is not specified, then the macro
populates 0 for that callback. Hence the functionality of the previous
deprecated macro is preserved. The USE_FINISH_CONSOLE_REG_2 define
is used to select the new variant of the macro and will be removed
once the deprecated variant is removed.

All the upstream console drivers have been migrated to use the new
macro in this patch.

NOTE: Platforms be aware that the new variant of the
`finish_console_register` should be used and the old variant is
deprecated.

Change-Id: Ia6a67aaf2aa3ba93932992d683587bbd0ad25259
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      cc5859ca
  53. 12 Oct, 2018 1 commit
  55. 03 Oct, 2018 1 commit
  57. 28 Sep, 2018 4 commits
  59. 21 Sep, 2018 1 commit
  61. 03 Sep, 2018 1 commit