Skip to content

GitLab

Switch branch/tag
  1. 01 Apr, 2019 1 commit
    • Ambroise Vincent's avatar
      Remove several warnings reported with W=1 · 609e053c
      Ambroise Vincent authored 
      

Improved support for W=1 compilation flag by solving missing-prototypes
and old-style-definition warnings.

The libraries are compiling with warnings (which turn into errors with
the Werror flag).

Outside of libraries, some warnings cannot be fixed without heavy
structural changes.

Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16
Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
      609e053c
  3. 13 Mar, 2019 1 commit
  5. 25 Jan, 2019 6 commits
  7. 22 Jan, 2019 1 commit
    • Andrew F. Davis's avatar
      ti: k3: common: Add support for runtime detection of GICR base address · b5443284
      Andrew F. Davis authored 
      

Valid addresses for GICR base are always a set calculable distance from
the GICD and is based on the number of cores a given instance of GICv3 IP
can support. The formula for the number of address bits is given by the
ARM GIC-500 TRM section 3.2 as 2^(18+log2(cores)) with the MSB set to
one for GICR instances. Holes in the GIC address space are also
guaranteed to safely return 0 on reads. This allows us to support runtime
detection of the GICR base address by starting from GIC base address plus
BIT(18) and walking until the GICR ID register (IIDR) is detected. We
stop searching after BIT(20) to prevent searching out into space if
something goes wrong. This can be extended out if we ever have a device
with 16 or more cores.
Signed-off-by: default avatarAndrew F. Davis <afd@ti.com>
      b5443284
  9. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored 
      Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
  11. 14 Dec, 2018 1 commit
    • Jeenu Viswambharan's avatar
      GIC: Remove lowest priority constants · 35cd9e81
      Jeenu Viswambharan authored 
      

The GIC lowest priority values for each world depends on the number of
priority values implemented in hardware. These constants currently
defined in gic_common.h only meant to enumerate lowest possible
architectural values. Since these values are not used in generic code or
upstream platforms, and that general use of these constants can be
wrong, remove these. Platforms should either define and use these as
appropriate, or determine correct values at run time.

Change-Id: I3805cea8ceb8a592b9eff681ea1b63b7496cec5f
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      35cd9e81
  13. 04 Dec, 2018 1 commit
  15. 23 Nov, 2018 1 commit
  17. 21 Nov, 2018 1 commit
  19. 08 Nov, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Standardise header guards across codebase · c3cf06f1
      Antonio Nino Diaz authored 
      

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c3cf06f1
  21. 01 Nov, 2018 1 commit
  23. 23 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      tzc: Fix MISRA defects · af6491f8
      Antonio Nino Diaz authored 
      

The definitions FAIL_CONTROL_*_SHIFT were incorrect, they have been
fixed.

The types tzc_region_attributes_t and tzc_action_t have been removed and
replaced by unsigned int because it is not allowed to do logical
operations on enums.

Also, fix some address definitions in arm_def.h.

Change-Id: Id37941d76883f9fe5045a5f0a4224c133c504d8b
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      af6491f8
  25. 11 Oct, 2018 1 commit
  27. 28 Sep, 2018 3 commits
  29. 03 Sep, 2018 1 commit
  31. 30 Aug, 2018 5 commits
  33. 22 Aug, 2018 1 commit
  35. 20 Aug, 2018 1 commit
  37. 30 Jul, 2018 1 commit
  39. 09 Apr, 2018 1 commit
  41. 26 Mar, 2018 1 commit
  43. 01 Mar, 2018 1 commit
    • Dan Handley's avatar
      Emit warnings when using deprecated GIC init · dcf01a0a
      Dan Handley authored 
      

Emit runtime warnings when intializing the GIC drivers using the
deprecated method of defining integer interrupt arrays in the GIC driver
data structures; interrupt_prop_t arrays should be used instead. This
helps platforms detect that they have migration work to do. Previously,
no warning was emitted in this case. This affects both the GICv2 and GICv3
drivers.

Also use the __deprecated attribute to emit a build time warning if these
deprecated fields are used. These warnings are suppressed in the GIC
driver compatibility functions but will be visible if platforms use them.

Change-Id: I6b6b8f6c3b4920c448b6dcb82fc18442cfdf6c7a
Signed-off-by: default avatarDan Handley <dan.handley@arm.com>
      dcf01a0a
  45. 28 Feb, 2018 1 commit
  47. 19 Jan, 2018 1 commit
  49. 13 Nov, 2017 2 commits
    • Jeenu Viswambharan's avatar
      BL31: Program Priority Mask for SMC handling · 3d732e23
      Jeenu Viswambharan authored 
      

On GICv3 systems, as a side effect of adding provision to handle EL3
interrupts (unconditionally routing FIQs to EL3), pending Non-secure
interrupts (signalled as FIQs) may preempt execution in lower Secure ELs
[1]. This will inadvertently disrupt the semantics of Fast SMC
(previously called Atomic SMC) calls.

To retain semantics of Fast SMCs, the GIC PMR must be programmed to
prevent Non-secure interrupts from preempting Secure execution. To that
effect, two new functions in the Exception Handling Framework subscribe
to events introduced in an earlier commit:

  - Upon 'cm_exited_normal_world', the Non-secure PMR is stashed, and
    the PMR is programmed to the highest Non-secure interrupt priority.

  - Upon 'cm_entering_normal_world', the previously stashed Non-secure
    PMR is restored.

The above sequence however prevents Yielding SMCs from being preempted
by Non-secure interrupts as intended. To facilitate this, the public API
exc_allow_ns_preemption() is introduced that programs the PMR to the
original Non-secure PMR value. Another API
exc_is_ns_preemption_allowed() is also introduced to check if
exc_allow_ns_preemption() had been called previously.

API documentation to follow.

[1] On GICv2 systems, this isn't a problem as, unlike GICv3, pending NS
    IRQs during Secure execution are signalled as IRQs, which aren't
    routed to EL3.

Change-Id: Ief96b162b0067179b1012332cd991ee1b3051dd0
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      3d732e23
    • Jeenu Viswambharan's avatar
      GIC: Introduce API to get interrupt ID · 4ee8d0be
      Jeenu Viswambharan authored 
      

Acknowledging interrupt shall return a raw value from the interrupt
controller in which the actual interrupt ID may be encoded. Add a
platform API to extract the actual interrupt ID from the raw value
obtained from interrupt controller.

Document the new function. Also clarify the semantics of interrupt
acknowledge.

Change-Id: I818dad7be47661658b16f9807877d259eb127405
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      4ee8d0be
  51. 08 Nov, 2017 1 commit
    • Etienne Carriere's avatar
      ARMv7: GICv2 driver can manage GICv1 with security extension · 64deed19
      Etienne Carriere authored 
      

Some SoCs integrate a GIC in version 1 that is currently not supported
by the trusted firmware. This change hijacks GICv2 driver to handle the
GICv1 as GICv1 is compatible enough with GICv2 as far as the platform
does not attempt to play with virtualization support or some GICv2
specific power features.

Note that current trusted firmware does not use these GICv2 features
that are not available in GICv1 Security Extension.

Change-Id: Ic2cb3055f1319a83455571d6d918661da583f179
Signed-off-by: default avatarEtienne Carriere <etienne.carriere@linaro.org>
      64deed19
  53. 16 Oct, 2017 2 commits
    • Jeenu Viswambharan's avatar
      GIC: Allow specifying interrupt properties · c639e8eb
      Jeenu Viswambharan authored 
      

The GIC driver initialization currently allows an array of interrupts to
be configured as secure. Future use cases would require more interrupt
configuration other than just security, such as priority.

This patch introduces a new interrupt property array as part of both
GICv2 and GICv3 driver data. The platform can populate the array with
interrupt numbers and respective properties. The corresponding driver
initialization iterates through the array, and applies interrupt
configuration as required.

This capability, and the current way of supplying array (or arrays, in
case of GICv3) of secure interrupts, are however mutually exclusive.
Henceforth, the platform should supply either:

  - A list of interrupts to be mapped as secure (the current way).
    Platforms that do this will continue working as they were. With this
    patch, this scheme is deprecated.

  - A list of interrupt properties (properties include interrupt group).
    Individual interrupt properties are specified via. descriptors of
    type 'interrupt_prop_desc_t', which can be populated with the macro
    INTR_PROP_DESC().

A run time assert checks that the platform doesn't specify both.

Henceforth the old scheme of providing list of secure interrupts is
deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require
that the interrupt properties are supplied instead of an array of secure
interrupts.

Add a section to firmware design about configuring secure interrupts.

Fixes ARM-software/tf-issues#262

Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      c639e8eb
    • Jeenu Viswambharan's avatar
      GIC: Add helpers to set interrupt configuration · 22966106
      Jeenu Viswambharan authored 
      

The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.

Change-Id: I71995f82ff2c7f70d37af0ede30d6ee18682fd3f
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      22966106