Skip to content

GitLab

Switch branch/tag
  1. 11 Jun, 2021 5 commits
    • johpow01's avatar
      feat(RME): Add RMMD · 65412d77
      johpow01 authored 
      

This patch introduces the RMM dispatcher into BL31. This
will be the mechanism that will enable communication to
take place between the Realm and non secure world. Currently
gives the capability for granules to be transitioned from
non secure type to realm and vice versa.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I70155b4df0f71ff576da98a627a0a46bb462688c
      65412d77
    • johpow01's avatar
      feat(RME): Add TRP · 08e34e7b
      johpow01 authored 
      

Adding Testing Realm Payload. This is the realm
dummy payload that is loaded as default if the RMM
is not loaded into BL32.  There are basic SMC
calls supported which include version request and
granule transition that is exercised from TFTF.
This is communicated to RMMD via SMC calls
from non secure world.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I489cb145866f05bb30dd4802a98464024af02fbf
      08e34e7b
    • johpow01's avatar
      feat(RME): Run BL2 in root world · 6e346fe2
      johpow01 authored 
      

This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I53ace51e326fcdd44d44c791a7cb9ffaa20ed3f5
      6e346fe2
    • johpow01's avatar
      feat(RME): Add GPT Library · 156ed4ce
      johpow01 authored 
      

This patch adds the granule partition table library code.  It will be
updated later to be more flexible, as the current implementation is
very rigid.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I523e247bdb373595131469f5226f0680514fcffe
      156ed4ce
    • johpow01's avatar
      feat(RME): Xlat updates and general architectural changes · fab2a4e3
      johpow01 authored 
      

This patch makes the necessary changes in the Xlat framework as well as
some general architectural changes needed in RME-enabled systems.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I1953de15fc9b8d10a6b2eead100513729f66e2ea
      fab2a4e3
  3. 29 Apr, 2021 1 commit
  5. 28 Apr, 2021 3 commits
    • David Horstmann's avatar
      refactor(plat/arm): store UUID as a string, rather than ints · 7d111d99
      David Horstmann authored 
      

NOTE: Breaking change to the way UUIDs are stored in the DT

Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.

Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.

To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.

Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      7d111d99
    • David Horstmann's avatar
      feat(fdt): introduce wrapper function to read DT UUIDs · d13dbb6f
      David Horstmann authored 
      

TF-A does not have the capability to read UUIDs in string form
from the device tree. This capability is useful for readability,
so add a wrapper function, fdtw_read_uuid() to parse UUIDs from
the DT.
This function should parse a string of the form:

"aabbccdd-eeff-4099-8877-665544332211"

to the byte sequence in memory:

[aa bb cc dd ee ff 40 99 88 77 66 55 44 33 22 11]

Change-Id: I99a92fbeb40f4f4713f3458b36cb3863354d2bdf
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      d13dbb6f
    • Manish V Badarkhe's avatar
      refactor(plat/arm): replace FIP base and size macro with a generic name · 49e9ac28
      Manish V Badarkhe authored 
      

Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.

Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      49e9ac28
  7. 27 Apr, 2021 1 commit
  9. 26 Apr, 2021 1 commit
    • Chris Kay's avatar
      docs(license): rectify `arm-gic.h` license · 3dbbbca2
      Chris Kay authored 
      

The `arm-gic.h` file distributed by the Linux kernel is disjunctively
dual-licensed under the GPL-2.0 or MIT licenses, but the BSD-3-Clause
license has been applied in violation of the requirements of both
licenses. This change ensures the file is correctly licensed under the
terms of the MIT license, and that we comply with it by distributing a
copy of the license text.

Change-Id: Ie90066753a5eb8c0e2fc95ba43e3f5bcbe2fa459
Signed-off-by: default avatarChris Kay <chris.kay@arm.com>
      3dbbbca2
  11. 21 Apr, 2021 3 commits
    • Yann Gautier's avatar
      Add PIE support for AARCH32 · 4324a14b
      Yann Gautier authored 
      

Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.

Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      4324a14b
    • Yann Gautier's avatar
      Avoid the use of linker *_SIZE__ macros · fb4f511f
      Yann Gautier authored 
      The use of end addresses is preferred over the size of sections.
This was done for some AARCH64 files for PIE with commit [1],
and some extra explanations can be found in its commit message.
Align the missing AARCH64 files.

For AARCH32 files, this is required to prepare PIE support introduction.

 [1] f1722b69

 ("PIE: Use PC relative adrp/adr for symbol reference")

Change-Id: I8f1c06580182b10c680310850f72904e58a54d7d
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      fb4f511f
    • Alexei Fedorov's avatar
      Plat FVP: Fix Generic Timer interrupt types · dfa6c540
      Alexei Fedorov authored 
      

The Arm Generic Timer specification mandates that the
interrupt associated with each timer is low level triggered,
see:

Arm Cortex-A76 Core:
"Each timer provides an active-LOW interrupt output to the SoC."

Arm Cortex-A53 MPCore Processor:
"It generates timer events as active-LOW interrupt outputs and
event streams."

The following files in fdts\

fvp-base-gicv3-psci-common.dtsi
fvp-base-gicv3-psci-aarch32-common.dtsi
fvp-base-gicv2-psci-aarch32.dts
fvp-base-gicv2-psci.dts
fvp-foundation-gicv2-psci.dts
fvp-foundation-gicv3-psci.dts

describe interrupt types as edge rising
IRQ_TYPE_EDGE_RISING = 0x01:

interrupts = <1 13 0xff01>,
             <1 14 0xff01>,
             <1 11 0xff01>,
             <1 10 0xff01>;

, see include\dt-bindings\interrupt-controller\arm-gic.h:

which causes Linux to generate the warnings below:
arch_timer: WARNING: Invalid trigger for IRQ5, assuming level low
arch_timer: WARNING: Please fix your firmware

This patch adds GIC_CPU_MASK_RAW macro definition to
include\dt-bindings\interrupt-controller\arm-gic.h,
modifies interrupt type to IRQ_TYPE_LEVEL_LOW and
makes use of type definitions in arm-gic.h.

Change-Id: Iafa2552a9db85a0559c73353f854e2e0066ab2b9
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      dfa6c540
  13. 20 Apr, 2021 3 commits
  15. 14 Apr, 2021 1 commit
  17. 13 Apr, 2021 1 commit
  19. 07 Apr, 2021 1 commit
    • Max Shvetsov's avatar
      Fix: Remove save/restore of EL2 timer registers · a7cf2743
      Max Shvetsov authored 
      

Since there is a secure and non-secure version of the timer registers
there is no need to preserve their context in EL3.
With that, following registers were removed from EL3 save/restore
routine:
	cnthps_ctl_el2
	cnthps_tval_el2
	cnthps_cval_el2
	cnthvs_ctl_el2
	cnthvs_tval_el2
	cnthvs_cval_el2
	cnthp_ctl_el2
	cnthp_cval_el2
	cnthp_tval_el2
	cnthv_ctl_el2
	cnthv_cval_el2
	cnthv_tval_el2
Signed-off-by: default avatarMax Shvetsov <maksims.svecovs@arm.com>
Change-Id: I6e2fc09c74a7375c4fccc11f12af4e39e6dc616b
      a7cf2743
  21. 01 Apr, 2021 1 commit
  23. 31 Mar, 2021 1 commit
  25. 26 Mar, 2021 1 commit
    • Bharat Gooty's avatar
      driver: brcm: add i2c driver · 48c6a6b6
      Bharat Gooty authored 
      

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: default avatarBharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
      48c6a6b6
  27. 24 Mar, 2021 8 commits
  29. 23 Mar, 2021 1 commit
    • Yann Gautier's avatar
      tzc400: add support for interrupts · 34c1a1a4
      Yann Gautier authored 
      

A new function tzc400_it_handler() is created to manage TZC400
interrupts. The required helpers to read and clear interrupts are added
as well.
In case DEBUG is enabled, more information about the faulty access
(address, NSAID, type of access) is displayed.

Change-Id: Ie9ab1c199a8f12b2c9472d7120efbdf35711284a
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      34c1a1a4
  31. 18 Mar, 2021 2 commits
    • Tomas Pilar's avatar
      tools_share/uuid: Add EFI_GUID representation · e831923f
      Tomas Pilar authored 
      

The UEFI specification details the represenatation
for the EFI_GUID type. Add this representation to the
uuid_helper_t union type so that GUID definitions
can be shared verbatim between UEFI and TF-A header
files.

Change-Id: Ie44ac141f70dd0025e186581d26dce1c1c29fce6
Signed-off-by: default avatarTomas Pilar <tomas@nuviainc.com>
      e831923f
    • Chris Kay's avatar
      arch: Enable `FEAT_SB` for supported non-Armv8.5-A platforms · 4e04478a
      Chris Kay authored 
      

The speculation barrier feature (`FEAT_SB`) was introduced with and
made mandatory in the Armv8.5-A extension. It was retroactively made
optional in prior extensions, but the checks in our code-base do not
reflect that, assuming that it is only available in Armv8.5-A or later.

This change introduces the `ENABLE_FEAT_SB` definition, which derives
support for the `sb` instruction in the assembler from the feature
flags passed to it. Note that we assume that if this feature is enabled
then all the cores in the system support it - enabling speculation
barriers for only a subset of the cores is unsupported.
Signed-off-by: default avatarChris Kay <chris.kay@arm.com>
Change-Id: I978ed38829385b221b10ba56d49b78f4756e20ea
      4e04478a
  33. 15 Mar, 2021 1 commit
  35. 10 Mar, 2021 2 commits
  37. 08 Mar, 2021 1 commit
  39. 01 Mar, 2021 1 commit
  41. 25 Feb, 2021 1 commit