GitLab

TF-A has so many linker scripts, at least one linker script for each BL
image, and some platforms have their own ones. They duplicate quite
similar code (and comments).

When we add some changes to linker scripts, we end up with touching
so many files. This is not nice in the maintainability perspective.

When you look at Linux kernel, the common code is macrofied in
include/asm-generic/vmlinux.lds.h, which is included from each arch
linker script, arch/*/kernel/vmlinux.lds.S

TF-A can follow this approach. Let's factor out the common code into
include/common/bl_common.ld.h

As a start point, this commit factors out the xlat_table section.

Change-Id: Ifa369e9b48e8e12702535d721cc2a16d12397895
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

With this, it is clearer that .base_table_entries and .tables_num
are the array size of .base_table and .tables, respectively.

Change-Id: I634e65aba835ab9908cc3919355df6bc6e18d42a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

xlat_tables_v2_helpers.h defines two quite similar macros,
REGISTER_XLAT_CONTEXT_FULL_SPEC and REGISTER_XLAT_CONTEXT_RO_BASE_TABLE.

Only the difference is the section of _ctx_name##_base_xlat_table.

Parameterize it and unify these two macros.

The base xlat table goes into the .bss section by default.
If PLAT_RO_XLAT_TABLES is defined, it goes into the .rodata section.

Change-Id: I8b02f4da98f0c272e348a200cebd89f479099c55
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  Tegra186: store TZDRAM base/size to scratch registers
  Tegra186: add SE support to generate SHA256 of TZRAM
  Tegra186: add support for bpmp_ipc driver
  Tegra210: disable ERRATA_A57_829520
  Tegra194: memctrl: add support for MIU4 and MIU5
  Tegra194: memctrl: remove support to reconfigure MSS
  Tegra: fiq_glue: remove bakery locks from interrupt handler
  Tegra210: SE: add context save support
  Tegra210: update the PMC blacklisted registers
  Tegra: disable CPUACTLR access from lower exception levels
  cpus: denver: fixup register used to store return address

This patch saves the TZDRAM base and size values to secure scratch
registers, for the WB0. The WB0 reads these values and uses them to
verify integrity of the TZDRAM aperture.

Change-Id: Ic70914cb958249f06cb58025a24d13734a85e16e
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL3-1 firmware code is stored in TZSRAM on Tegra186 platforms. This
memory loses power when we enter System Suspend and so its contents are
stored to TZDRAM, before entry. This opens up an attack vector where the
TZDRAM contents might be tampered with when we are in the System Suspend
mode. To mitigate this attack the SE engine calculates the hash of entire
TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The
WB0 code will validate the TZDRAM and match the hash with the one in PMC
scratch.

This patch adds driver for the SE engine, with APIs to calculate the hash
and store SE SHA256 hash-result to PMC scratch registers.

Change-Id: Ib487d5629225d3d99bd35d44f0402d6d3cf27ddf
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

This patch enables the bpmp-ipc driver for Tegra186 platforms,
to ask BPMP firmware to toggle SE clock.

Change-Id: Ie63587346c4d9b7e54767dbee17d0139fa2818ae
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

ERRATA_A57_829520 disables "indirect branch prediction" for
EL1 on cpu reset, leading to 15% drop in CPU performance
with coremark benchmarks.

Tegra210 already has a hardware fix for ARM BUG#829520,so
this errata is not needed.

This patch disables the errata to get increased performance
numbers.

Change-Id: I0b42e8badd19a8101f6a55d80eb2d953597d3c20
Signed-off-by: Mithun Maragiri <mmaragiri@nvidia.com>

This patch adds support for memqual miu 4,5.

The MEMQUAL engine has miu0 to miu7 in which miu6 and
miu7 is hardwired to bypass SMMU. So only miu0 to miu5
support is provided.

Change-Id: Ib350334eec521e65f395f1c3205e2cdaf464ebea
Signed-off-by: Pravin <pt@nvidia.com>

As bpmp-fw is running at the same time as ATF, and
the mss client reconfiguration sequence involves performing
a hot flush resets on bpmp, there is a chance that bpmp-fw is
trying to perform accesses while the hot flush is active.

Therefore, the mss client reconfigure has been moved to
System Suspend resume fw and bootloader, and it can be
removed from here.

Change-Id: I34019ad12abea9681f5e180af6bc86f2c4c6fc74
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>

This patch removes usage of bakery_locks from the FIQ handler, as it
creates unnecessary dependency whenever the watchdog timer interrupt
fires. All operations inside the interrupt handler are 'reads', so
no need for serialization.

Change-Id: I3f675e610e4dabc5b1435fdd24bc28e424f5a8e4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra210B01 SoCs support atomic context save for the two SE
hardware engines. Tegra210 SoCs have support for only one SE
engine and support a software based save/restore mechanism
instead.

This patch updates the SE driver to make this change.

Change-Id: Ia5e5ed75d0fe011f17809684bbc2ed2338925946
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Update the list to include PMC registers that the NS world cannot
access even with smc calls.

Change-Id: I588179b56ebc0c29200b55e6d61535fd3a7a3b7e
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

This patch resets the macros to update the CPUACTLR_ELx to make
them generic for all exception levels.

Change-Id: I33e9b860efb543934b654a2f5d775135df7f1aa6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The denver_enable_dco and denver_disable_dco use register X3 to store
the return address. But X3 gets over-written by other functions,
downstream.

This patch stores the return address to X18 instead, to fix this
anomaly.

Change-Id: Ic40bfc1d9abaa7b90348843b9ecd09521bb4ee7b
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

* changes:
  docs: qemu: Add instructions to boot using FIP image
  docs: Update docs with firmware encryption feature
  qemu: Support optional encryption of BL31 and BL32 images
  qemu: Update flash address map to keep FIP in secure FLASH0
  Makefile: Add support to optionally encrypt BL31 and BL32
  tools: Add firmware authenticated encryption tool
  TBB: Add an IO abstraction layer to load encrypted firmwares
  drivers: crypto: Add authenticated decryption framework

Update qemu documentation with instructions to boot using FIP image.
Also, add option to build TF-A with TBBR and firmware encryption
enabled.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: Ib3af485d413cd595352034c82c2268d7f4cb120a

Update documentation with optional firmware encryption feature.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I26691b18e1ee52a73090954260f26f2865c4e05a

In CPU resume function, CPU suspend count was printed instead of CPU
resume count.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I0c081dc03a4ccfb2129687f690667c5ceed00a5f

Currently, the ROM region is needlessly too large.

The on-chip SRAM region of the next SoC will start from 0x04000000,
and this will cause the region overlap.

Mapping 0x04000000 for the ROM is enough.

Change-Id: I85ce0bb1120ebff2e3bc7fd13dc0fd15dfff5ff6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Enable encryption IO layer to be stacked above FIP IO layer for optional
encryption of Bl31 and BL32 images in case ENCRYPT_BL31 or ENCRYPT_BL32
build flag is set.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I24cba64728861e833abffc3d5d9807599c49feb6

Secure FLASH0 memory map looks like:
- Offset: 0 to 256K -> bl1.bin
- Offset: 256K to 4.25M -> fip.bin

FLASH1 is normally used via UEFI/edk2 to keep varstore.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I6883f556c22d6a5d3fa3846c703bebc2abe36765

Following build flags have been added to support optional firmware
encryption:

- FW_ENC_STATUS: Top level firmware's encryption numeric flag, values:
    0: Encryption is done with Secret Symmetric Key (SSK) which is
       common for a class of devices.
    1: Encryption is done with Binding Secret Symmetric Key (BSSK) which
       is unique per device.

- ENC_KEY: A 32-byte (256-bit) symmetric key in hex string format. It
    could be SSK or BSSK depending on FW_ENC_STATUS flag.

- ENC_NONCE: A 12-byte (96-bit) encryption nonce or Initialization Vector
    (IV) in hex string format.

- ENCRYPT_BL31: Binary flag to enable encryption of BL31 firmware.

- ENCRYPT_BL32: Binary flag to enable encryption of Secure BL32 payload.

Similar flags can be added to encrypt other firmwares as well depending
on use-cases.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I94374d6830ad5908df557f63823e58383d8ad670

Add firmware authenticated encryption tool which utilizes OpenSSL
library to encrypt firmwares using a key provided via cmdline. Currently
this tool supports AES-GCM as an authenticated encryption algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I60e296af1b98f1912a19d5f91066be7ea85836e4

TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.

Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03

Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271

* changes:
  SPMD: add command line parameter to run SPM at S-EL2 or S-EL1
  SPMD: smc handler qualify secure origin using booleans
  SPMD: SPMC init, SMC handler cosmetic changes
  SPMD: [tegra] rename el1_sys_regs structure to sys_regs
  SPMD: Adds partially supported EL2 registers.
  SPMD: save/restore EL2 system registers.

* changes:
  imx: console: Use CONSOLE_T_BASE for UART base address
  Tegra: spe: use CONSOLE_T_BASE to save MMIO base address

The cpu index was wrongly checked causing it to assert always.
Since this code path is exercised only during TF test "NODE_HW_STAT",
which queries Power state from SCP, this bug was not detected earlier.

Change-Id: Ia25cef4c0aa23ed08092df39134937a2601c21ac
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Since commit ac71344e

 we have the UART base address in the generic
console_t structure. For most platforms the platform-specific struct
console is gone, so we *must* use the embedded base address, since there
is no storage behind the generic console_t anymore.

Replace the usage of CONSOLE_T_DRVDATA with CONSOLE_T_BASE to fix this.

Change-Id: I6d2ab0bc2c845c71f98b9dd64d89eef3252f4591
Reported-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Commit ac71344e

 moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.

This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40

* changes:
  SPMD: loading Secure Partition payloads
  fvp: add Cactus/Ivy Secure Partition information
  fconf: Add Secure Partitions information as property

This change is to add ethernet and voltage regulator nodes into
a5ds devicetree.

Change-Id: If9ed67040d54e76af1813c9f99835f51f617e9df
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>

This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.

The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.

To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.

Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>