- 02 Apr, 2019 10 commits
-
-
Remi Pommarel authored
In order to configure and boot SCP, BL31 has to compute and send the SHA-256 of the firmware data via scpi. Luckily Amlogic GXL SOC has a DMA facility that could be used to offload SHA-256 computations. This adds basic support of this hardware SHA-256 engine. Signed-off-by: Remi Pommarel <repk@triplefau.lt>
-
Valentine Barshak authored
Add R-Car V3M support. This is based on the original V3M support patch for Yocto v2.23.1 by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> --- Marek: Update on top of mainline ATF/master
-
Marek Vasut authored
Add QoS tables for R-Car D3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add PFC tables for R-Car D3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add R-Car D3 DDR initialization code. The code is in staging and needs cleanup, and possibly can even be merged with the E3 init code. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add WTCNT register configuration for the D3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add SCIF configuration specifics for the D3 SoC, that is detection of the D3 SoC and SCBRR configuration. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
The D3 SoC has one CPU core, just return 1 as a CPU number. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add comment into the ROM driver that the new table is also D3 compatible. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add R-Car D3 SoC platform specifics. Driver, PFC, QoS, DDR init code will be added separately. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
- 01 Apr, 2019 2 commits
-
-
Ambroise Vincent authored
Improved support for W=2 compilation flag by solving some nested-extern and sign-compare warnings. The libraries are compiling with warnings (which turn into errors with the Werror flag). Outside of libraries, some warnings cannot be fixed. Change-Id: I06b1923857f2a6a50e93d62d0274915b268cef05 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Improved support for W=1 compilation flag by solving missing-prototypes and old-style-definition warnings. The libraries are compiling with warnings (which turn into errors with the Werror flag). Outside of libraries, some warnings cannot be fixed without heavy structural changes. Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
- 22 Mar, 2019 1 commit
-
-
Tien Hock, Loh authored
dw_params.mmc_dev_type should be assigned before mmc_init, otherwise SDMMC initialization will fail as the initialization treats the device as EMMC instead of SD. Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
-
- 13 Mar, 2019 2 commits
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Manages QSPI initialization, configuration and IO handling as boot device Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>
-
Masahisa Kojima authored
Enable the SCMI protocol support in SynQuacer platform. Aside from power domain, system power and apcore management protocol, this commit adds the vendor specific protocol(0x80). This vendor specific protocol is used to get the dram mapping information from SCP. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
-
- 12 Mar, 2019 3 commits
-
-
Paul Beesley authored
The comment suggests checking version numbers and a checksum but there doesn't seem to be any usable data for either of these. For example, fip_toc_header_t doesn't contain any version information and neither does fip_toc_entry_t. As the function name "is_valid_header" suggests, this function is not concerned with checksumming any of the table of contents entries. Change-Id: I8673ae5dd37793771760169f26b2f55c15fbf587 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
Paul Beesley authored
This TODO was added five years ago so I assume that there is not going to be a shutdown API added after all. Change-Id: If0f4e2066454df773bd9bf41ed65d3a10248a2d3 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
Tien Hock, Loh authored
There are some issues with synopsys MMC driver: - CMD8 should not expect data (for SD) - ACMD51 should expect data (Send SCR for SD) - dw_prepare should not dictate size to be MMC_BLOCK_SIZE, block size is now handled in the dw_prepare function - after the CMD completes, when doing dw_read, we need to invalidate cache and wait for the data transfer to complete - Need to set FIFO threshold, otherwise DMA might never get the interrupt to read or write Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
-
- 08 Mar, 2019 1 commit
-
-
Yann Gautier authored
STM32MP1 SDMMC device voltage is 3.3V. We should then precise the 2 ranges 3.2 to 3.3V and 3.3 to 3.4V in ocr_voltage field. Change-Id: I88e479f8f16bfe608a7808eace0df3fdec48deab Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 07 Mar, 2019 1 commit
-
-
Tien Hock, Loh authored
Some bugs in MMC stack needs to be fixed: - scr cannot be local as this will cause cache issue when invalidating after the read DMA transfer is completed - ACMD41 needs to send voltage information in initialization, otherwise the command is a query, thus will not initialize the controller - when checking device state, retry until the retries counter goes to zero before failing Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
-
- 04 Mar, 2019 2 commits
-
-
Marek Vasut authored
Configure the GPIO5 09 pin as input on the ULCB board by default, since the pin is routed on the expansion connector and not connected to anything by default. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
Marek Vasut authored
Add support for the M3W 3.0 SoC and synchronize the upstream ATF with Renesas downstream ATF release v2.0.1. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
-
- 28 Feb, 2019 2 commits
-
-
John Tsichritzis authored
Due to the shared Mbed TLS heap optimisation introduced in 6d01a463 , common code files were depending on Mbed TLS specific headers. This dependency is now removed by moving the default, unoptimised heap implementation inside the Mbed TLS specific files. Change-Id: I11ea3eb4474f0d9b6cb79a2afd73a51a4a9b8994 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
Antonio Nino Diaz authored
Fix some typos and clarify some sentences. Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 26 Feb, 2019 1 commit
-
-
Ying-Chun Liu (PaulLiu) authored
This commit improves the SDHost driver for RPi3 as following: * Unblock MMC_CMD(17). Using MMC_CMD(17) is more efficient on block reading. * In some low probability that SEND_OP_COND might results CRC7 error. We can consider that the command runs correctly. We don't need to retry this command so removing the code for retry. * Using MMC_BUS_WIDTH_1 as MMC default value to improve the stability. * Increase the clock to 50Mhz in data mode to speed up the io. * Change the pull resistors configuration to gain more stability. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
-
- 20 Feb, 2019 1 commit
-
-
Yann Gautier authored
STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4. The support for Cortex-M4 clocks is added when configuring the clock tree. Some minimal security features to allow communications between A7 and M4 are also added. Change-Id: I60417e244a476f60a2758f4969700b2684056665 Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 19 Feb, 2019 1 commit
-
-
Usama Arif authored
Cortex a5 doesnt support hardware division such as sdiv and udiv commands. This commit adds a software division function in assembly as well as include appropriate files for software divison. The software division algorithm is a modified version obtained from: http://www.keil.com/support/man/docs/armasm/armasm_dom1359731155623.htm Change-Id: Ib405a330da5f1cea1e68e07e7b520edeef9e2652 Signed-off-by: Usama Arif <usama.arif@arm.com>
-
- 14 Feb, 2019 9 commits
-
-
Yann Gautier authored
Remove useless private structure in function prototypes. Add a reference counter on clocks. Prepare for future secured/shared/non-secured clocks. Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
This change makes the platform to panic in case of peripheral reset resource malfunction. Change-Id: I17eb9cb045b78a4e5142a8c33b744e84992d732a Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree. Platform asserts the value read from the DT are the SoC addresses. Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Create a new file stm32mp_clkfunc.c to put functions that could be common between several platforms. Change-Id: Ica915c796b162b2345056b33328acc05035a242c Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Regulator configuration at boot takes more information from DT. I2C configuration from DT is done in I2C driver. I2C driver manages more transfer modes. The min voltage of buck1 should also be increased to 1.2V, else the platform does not boot. Heavily modifies stm32_i2c.c since many functions move inside the source file to remove redundant declarations. Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Remove the previously use function: get_timer, and use new functions timeout_init_us and timeout_elapsed. Change-Id: I4e95b123648bff7ca91e40462a2a3ae24cfe1697 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Include all RCC, clocks and reset headers from stm32mp1_def.h which if exported to the firmware through platform_def.h. The same dependency removal is done in common code as well. Some useless includes are also removed in stm32_sdmmc2 driver. Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions that can be used in drivers shared by different platforms. Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
-
Yann Gautier authored
Some parts of code could be shared with platform derivatives, or new platforms. A new folder plat/st/common is created to put common parts. stm32mp_common.h is a common API aggregate. Remove some casts where applicable. Fix some types where applicable. Remove also some platform includes that are already in stm32mp1_def.h. Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
-
- 13 Feb, 2019 1 commit
-
-
Loh Tien Hock authored
This is to add simple MBR partition entry support. This will read all four MBR partition into the partition list, and the partition type will be saved in the list.name[0] entry. Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>
-
- 12 Feb, 2019 1 commit
-
-
Ying-Chun Liu (PaulLiu) authored
This commit migrates to MULTI_CONSOLE_API for IMX Warp7 board. We also rename the functions in imx_uart driver to more specific one. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
-
- 06 Feb, 2019 1 commit
-
-
Antonio Nino Diaz authored
The Generic Timer is an optional extension to an ARMv7-A implementation. The generic delay timer can be used from any architecture supported by the Trusted Firmware. In ARMv7 it is needed to check that this feature is present. In ARMv8 it is always present. Change-Id: Ib7e8ec13ffbb2f64445d4ee48ed00f26e34b79b7 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 04 Feb, 2019 1 commit
-
-
Soby Mathew authored
Previously the GICv3 redistributor probe function (gicv3_rdistif_base_addrs_probe()) asserted that the number of per-CPU redistributor interfaces expected to be probed by the platform is equal to the number exported by the redistributor frame. This is a problem in case the number of CPUs in the platform is less than the number of redistributor interfaces in the frame. Hence this patch removes the assertion check and allows probe for fewer redistributor interfaces as required by the platform. Change-Id: I3449763a3ad70817224442cbe184d001030c9874 Signed-off-by: Soby Mathew <soby.mathew@arm.com>
-