GitLab

Need to use bitwise & instead of condition &&.

Change-Id: I8f70aac95d116188ba972f3d38b02e1d3dd32acb
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

The FPGA configuration is encoded in the high byte of
MISCREG_EMU_REVID. Configs GPU and MAX (encoded as
2 and 3) support the ISO SMMU, while BASE (encoded as 1)
does not. This patch implements this encoding and returns
the proper number of SMMU instances.

Change-Id: I024286b6091120c7602f63065d20ce48bcfd13fe
Signed-off-by: Steven Kao <skao@nvidia.com>

System suspend sequence involves initializing the SMMU
as a part of the system suspend exit, which is currently
not present for Tegra194 platform.

Thus call tegra_smmu_init() as a part of system suspend
exit.

Change-Id: I3086301743019e05a40fd221372e7f8713f286ae
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch updates the cpu core id calculation to match with
internal numbering method used by the MTS.

Change-Id: I5fbe9c8685c23017edc796e114d07c5e979e0d3d
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>

This patch changes direct writes to ACTLR_ELx registers to use
read-modify-write instead.

Change-Id: I536dce75c01356ce054dd2edee80875e56164439
Signed-off-by: Steven Kao <skao@nvidia.com>

Fake system suspend for Tegra194, calls the routine
tegra_secure_entrypoint() instead of calling WFI.
In essence, this is a debug mode that ensures
that the code path of kernel->ATF and back to kernel
is executed without depending on other components
involved in the system suspend path.

This is for ensuring that verification of system suspend
can be done on pre-silicon platforms without depending on
the rest of the layers being enabled.

Change-Id: I18572b169b7ef786f9029600dad9ef5728634f2b
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch converts the 'target_cpu' and 'target_cluster' variables from
the tegra_soc_pwr_domain_on() handler to 32-bits. This fixes the signed
comparison warning flagged by the compiler.

Change-Id: Idfd7ad2a62749bb0dd032eb9eb5f4b28df32bba0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds platform support for the Memory Controller and
SMMU drivers, for the Tegra194 SoC.

Change-Id: Id8b482de70f1f93bedbca8d124575c39b469927f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for cpu suspend in T19x soc.

Change-Id: I8ef1d3e03ee9c528dec34eaff6dcbbfa43941484
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>

CPU0 is default on, so it doesn't need to run pwr_domain_on() at
boot. CPU0 AARCH64 will be set in pwr_domain_suspend(), but it may
encounter race condition with other CPUs.

Now AARCH64 will be set with cluster on in pwr_domain_on(), and
all CPUs on this cluster will be set together. It doesn't need to
set AARCH64 again in pwr_domain_suspend(), so the race condition
can be avoided.

Change-Id: I5693ad56e4901f82badb0fc0d8d13e4c9acfe648
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>

Implement rdist save/resore functions to support low power scenarios.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I9ddc077a04f843275fbe2e868cdd0bd00d622de7

Change-Id: Ia120bcaacea3a462ab78db13f84ed23493033601
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

ROMLIB extract functions code from BL images to put them inside ROM.
This has for effect to reduce the size of the BL images.

This patch take this size reduction into consideration to optimize the
memory layout of BL2.
A new "PLAT_ARM_BL2_ROMLIB_OPTIMIZATION" macro is defined and used to
reduce "PLAT_ARM_MAX_BL2_SIZE". This allows to remove the gap between
BL1 and BL2 when ROMLIB is used and provides more room for BL31.

The current memory gain is 0x6000 for fvp and 0x8000 for juno.

Change-Id: I71c2c2c63b57bce5b22a125efaefc486ff3e87be
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

The number of levels in the topology has not changed but the count of
processing elements on the lowest layer is now multiplied by the value
of FVP_MAX_PE_PER_CPU.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ia1568a40ea33dbbbcdfab6c8ab6d19f4db0b8eb4

This patch removes the code to enable L2 ECC parity protection
bit, as Tegra194 does not have any Cortex-A57 CPUs.

Change-Id: I4b56595fea2652e8bb8ab4a7ae7567278ecff9af
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

This patch marks the unused parameter 'cookie', to the
plat_sip_handler() function, as const to fix an issue
flagged by the MISRA scan.

Change-Id: I53fdd2caadf43fef17fbc3a50a18bf7fdbd42d39
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements the platform handler to return the pointer
to the power domain tree.

Change-Id: I74ea7002c7a461a028b4a252bbd354256fdc0647
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.

Change-Id: I09e96a1874dd86626c7e41c92a1484a84e387402
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch adds macros to check the GPU reset status bit, before
resizing the VideoMem region.

Change-Id: I4377c1ce1ac6d3bd14c7db83526b99d72bdb41ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

- In pre-silicon platforms, MCE might not be ready
  to support system suspend(SC7)
- Thus, in fake system suspend mode, bypass waiting for
  MCE's acknowledgment to enter system suspend

Change-Id: Ia3c010ce080c4283ab1233ba82e3e577adca34f6
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch does the following:
1. Populate the cstate info corresponding to system suspend
   and communicate it to the MCE
2. Ask for MCE's acknowledgement for entering system suspend
   and instruct MCE to get inside system suspend once
   permitted

Change-Id: I51e1910e24a7e61e36ac2d12ce271290e433e506
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link, for now only dual-chip
is supported.

Whether or not multiple chips are present is dynamically probed by
SCP firmware and passed on to TF-A, routing table will be set up
only if multiple chips are present.

Initialize GIC-600 multichip operation by overriding the default GICR
frames with array of GICR frames and setting the chip 0 as routing
table owner.

Change-Id: Ida35672be4bbf4c517469a5b330548d75e593ff2
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Earlier PIE support was enabled for all arm platforms when
RESET_TO_BL31=1, but later on it was restricted only to FVP with patch
SHA d4580d17

 because of n1sdp platform.

Now it has been verified that PIE does work for n1sdp platform also, so
enabling it again for all arm platforms.

Change-Id: I05ad4f1775ef72e7cb578ec9245cde3fbce971a5
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

1. Switch ARMPLL_LL/CCIPLL/MAINPLL/MPLL control to SPM
2. Switch CLKSQ1/TDCLKSQ control to SPM
3. Switch ck_off/axi_26m control to SPM

BUG=b:136980838
TEST=system suspend/resume passed

Change-Id: I5c8506f7cf16d5cdaeb5ef8caa60a2992a361e18
Signed-off-by: Roger Lu <roger.lu@mediatek.com>

ARM platform can have a non-contiguous GICR frames. For instance, a
multi socket platform can have two or more GIC Redistributor frames
which are 4TB apart. Hence it is necessary for the `gicv3_rdistif_probe`
function to probe all the GICR frames available in the platform.

Introduce `plat_arm_override_gicr_frames` function which platforms can
use to override the default gicr_frames which holds the GICR base
address of the primary cpu.

Change-Id: I1f537b0d871a679cb256092944737f2e55ab866e
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link  for now only dual-chip is
supported.

A single instance of TF-A runs on master chip which should be aware of
slave chip's CPU and memory topology.

This patch updates platform macros to include remote chip's information
and also ensures that a single version of firmware works for both single
and dual-chip setup.

Change-Id: I75799fd46dc10527aa99585226099d836c21da70
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Platform information structure holds information about platform's DDR
size(local/remote) which will be used to zero out the memory before
enabling the ECC capability as well as information about multichip
setup. Multichip and remote DDR information can only be probed in SCP,
SDS region will be used by TF-A to get this information at boot up.

This patch introduces a new SDS to store platform information, which is
populated dynamically by SCP Firmware.previously used mem_info SDS is
also made part of this structure itself.

The platform information is also passed to BL33 by copying it to Non-
Secure SRAM.

Change-Id: I4781dc6a7232c3c0a3219b164d943ce9e3e469ee
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Running TF-A from non-standard location such as DRAM is useful for some
SRAM heavy use-cases. Allow the TF-A binary to be executed from an
arbitrary memory location.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Icd97926e4d97f37d7cde4a92758a52f57d569111

This patch adds macros defining the generalised security carveout
registers. These macros help us program the TZRAM carveout access
and the Video Protect Clear carveout access.

Change-Id: I8f7b24b653fdb702fb57a4097801cb3eae050294
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch defines the macro for the TEGRA_TMRUS aperture size.

Change-Id: I33fb674c6a7be8d02971667e7bf8650b7adc62ef
Signed-off-by: Steven Kao <skao@nvidia.com>

TEGRA186_SMMU_CTX_SIZE should match the numbe of elements
in smmu_ctx_regs, which is defined in smmu_plat_config.h.
The current number of elements are 0x490.

Change-Id: If0614ea8ef8b6a8f5da1a3279abaf9255eb76420
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>

Dont run MCE firmware on pre-silicon emulation platforms

Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>

GPU, MPCORE and PTC clients are changed and not going through SMMU.
Removing it from streamid list.

Change-Id: I14b450a11f02ad6c1a97e67e487d6d624911d019
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch uses SMC64 encoding for all MCE SMC calls originating
from the linux kernel.

Change-Id: Ic4633de5c638566012db033bbaf8c9d9343acdc0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:

- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests

Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>

Enable smmu by setting ENABLE_SMMU_DEVICE to 1.

Change-Id: I9135071b257a166fa6082b7fe409bcd315cf6838
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch adds support for all three SMMU devices present on the SoC.

The following changes have been done:
    Add SMMU devices to the memory map
    Update register read and write functions

Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Define mc sid and txn override regs and sec cfgs.
Create array for mc sid override regs and sec config that is
used to initialize mc.
Add smmu ctx regs array to hold register values during suspend.

Change-Id: I7b265710a9ec2be7dea050058bce65c614772c78
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.

Change-Id: I3c18eb844963f39f91b5ac45e3709f3354bcda0c
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>