GitLab

Builds in Debug mode with Measured Boot enabled might run out of trusted
SRAM. This patch allows to change the Log Level at which the Measured Boot
driver will dump the event log, so the latter can be accessed even on
Release builds if necessary, saving space on RAM.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I133689e313776cb3f231b774c26cbca4760fa120

Change-Id: Iedaa83ed546eb2476849a8d53f6e05b847a48b23
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

To avoid trapping from EL0/1, FPEN bits need to be set 0x3, not
clearing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ic34e9aeb876872883c5f040618ed6d50f21dacd0

Neoverse N1 erratum 1868343 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core.  The workaround is to
set a bit in the CPUACTLR_EL1 system register, which delays instruction
fetch after branch misprediction. This workaround will have a small
impact on performance.

SDEN can be found here:
https://documentation-service.arm.com/static/5f2c130260a93e65927bc92f

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I37da2b3b2da697701b883bff9a1eff2772352844

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I69365d4aed1160af41e291f6e4b1dd31cbd12e02

I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I542ec3cf1bb929a5656dda6dbad816b69837c646

Updated the cot-binding documentation to add 'id'
property for the trusted and non-trusted nv-counters.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If1c628c5b90fe403dd96c7cd0cd04f37288c965c

- Add some guidance about the type of information a patch author should
  provide to facilitate the review (and for future reference).

- Make a number of implicit expectations explicit:
  - Every patch must compile.
  - All CI tests must pass.

- Mention that the patch author is expected to add reviewers and explain
  how to choose them.

- Explain the patch submission rules in terms of Gerrit labels.

Also do some cosmetic changes, like adding empty lines, shuffling some
paragraphs around.

Change-Id: I6dac486684310b5a35aac7353e10fe5474a81ec5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Add a section for that in the coding guidelines.

Change-Id: Ie6819c4df5889a861460eb96acf2bc9c0cfb494e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Change-Id: I5362780db422772fd547dc8e68e459109edccdd0
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a

Documented the CPU specific build macros created for AT
speculative workaround.

Updated the description of 'ERRATA_SPECULATIVE_AT' errata
workaround option.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie46a80d4e8183c1d5c8b153f08742a04d41a2af2

SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.

This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.

Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Ensuring that each file changed by a patch has the correct copyright and
license information does not only apply to documentation files but to
all files within the source tree.

Move the guidance for copyright and license headers out of the paragraph
about updating the documentation to avoid any confusion.

Also do some cosmetic changes (adding empty lines, fitting in longer
lines in the 80-column limit, ...) to improve the readability of the RST
file.

Change-Id: I241a2089ca9db70f5a9f26b7070b947674b43265
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Change-Id: Ib4ad853ebb6e28adcf9ed14714d43799f9370343
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Change-Id: I43e452c9993a8608b20ec029562982f5dcf8e6b2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

We have noticed that Phabricator (the ticketing system on tf.org [1])
has far less visibility within the community than the mailing list [2].
For this reason, let's drop usage of Phabricator for anything else than
bug reports. For the rest, advise contributors to start a discussion on
the mailing list, where they are more likely to get feedback.

[1] https://developer.trustedfirmware.org/project/board/1/
[2] https://lists.trustedfirmware.org/mailman/listinfo/tf-a



Change-Id: I7d2d3d305ad0a0f8aacc2a2f25eb5ff429853a3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.

Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Adding support for QTI CHIP SC7180 on ATF

Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>

Change-Id: If82aaba9f2a5a74cfb5e4381f968166037a70037
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.

This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8

These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build

A sample broken link is reported as follows:
(line   80) -local-   firmware-design.rst#secure-el1-payloads-and-dispatchers

Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

- Add basic platform setup
- Add mt8192 documentation at docs/plat/
- Add generic CPU helper functions
- Add basic register address

Change-Id: Ife34622105404a8227441aab939e3c55c96374e9
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.

Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb

Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.

Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.

Also, updated the document for this newly created build option

Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

The purpose of rx_training had changed after last update. Currently it
is not supposed to help with providing static parameters for porting
layer. Instead, it aims to suit the parameters per connection.

Change-Id: I2a146b71e2e20bd264c090a9a627d0b6bc56e052
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: I0cebbaa900aa518700f13cbf02f8a97e0c76b21c
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add references to the OcteonTX2 CN913x family.

Change-Id: I172a8e3d061086bf4843acad014c113c80359e01
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The link to the exception handling framework page on the System Design /
Firmware Design / Section 4.3 just links to itself, so I changed it to
link to the exception handling framework component document.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I6711b423a789b2b3d1921671e8497fffa8ba33d1

Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.

Also, updated porting guide for the newly added platform function.

Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

This reverts commit 11af40b6, reversing
changes made to 2afcf1d4.

This errata workaround did not work as intended so we are reverting this
change.  In the future, when the corrected workaround is published in an
SDEN, we will push a new workaround.

This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4750

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I20aa064c1bac9671939e657bec269d32b9e75a97

Update SGI-575, RD-E1-Edge and RD-N1-Edge FVP versions to 11.10/36 and
add RD-N1-Edge-Dual to the list of supported Arm Fixed Virtual
Platforms.

Change-Id: I9e7e5662324eeefc80d799ca5341b5bc4dc39cbb
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.

Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

definitions
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I1c5cc8af34c02a6294ffc44a26152fb8984927fc

Former EL3 Secure Partition Manager using MM protocol is renamed
Secure Partition Manager (MM).
A new Secure Partition Manager document covers TF-A support for the
PSA FF-A compliant implementation.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9763359c2e96181e1726c8ad72738de293b80eb4

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Ib327bda239bb5163c60764bae90b0739589dcf66

This patch adds the following models
 FVP_Base_Neoverse-E1x1
 FVP_Base_Neoverse-E1x2
 FVP_Base_Neoverse-E1x4
to the list of supported FVP platforms.

Change-Id: Ib526a2a735f17724af3a874b06bf69b4ca85d0dd
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

docker (container) is another way to build the documentation and fortunately
there is already a docker image (sphinxdoc/sphinx) with sphinx so we can use
it to generate the documentation.

Change-Id: I06b0621cd7509a8279655e828680b92241b9fde4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I6d3949a971fada5a086b788dbe274f8451fcfc0d