GitLab

Add support for writing to AFI registers.
So that after writing a bitstream the interface can be programmed.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

Since the MMIO read/write APIs are removed from Linux user space,
Linux cannot directly write to the Global General Storage Register 4
any more to set healthy boot status.

Create an IOCTL to allow Linux to set boot health status.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Acked-by: Will Wong <willw@xilinx.com>

To make ULPI transceiver work, a HIGH - LOW - HIGH pulse needs
to be given to resetb pin of ULPI chip. In ZYNQMP, this resetb
pin is being driven by BOOT MODE PIN 1. The BOOT MODE PIN's
are controlled by BOOT_PIN_CTRL register present in CRL_APB
address region. Since CRL_APB can be resticted to secure access,
this pin should be controlled by ATF.

This patch adds the support for the same.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

This patch adds support to restart system incase of wdt
timeout.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

The vcu disable bit in efuse ipdisable register is valid
only if PL powered up so, consider PL powerup status for
determing EG/EV part. If PL is not powered up, display
EG/EV as a part of string. The PL powerup status will
be filled by pmufw based on PL PROGB status in the
9th bit of version field.This patch also used IPI
to get this info from pmufw instead of directly accessing
the registers. Accessing this info from pmufw using
IPI fixes the issue of PMUFW access denied error for
reading IPDISABLE register.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

Read ipdisable reg which needs to be used for cg/eg/ev device detection.
ATF runs in EL3 that's why this read can be done directly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

This patch corrects the SVD mask for getting chip ID
using 0xe is wrong and 0x7 is correct.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

Various changes to comply with MISRA static analysis rules
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Add IOCTLs to read/write global general storage and
persistent global general storage registers access.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

- Add clock entries and information to clock database.
- Implement APIs to provide clock topology and other
  information to caller.
- Implement APIs to control clocks and PLLs.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Implement ioctl APIs which uses MMIO operations
to configure devices. Below IOCTLs are supported
in this patch:
  * Set tap delay bypass
  * Set SGMII mode
  * SD reset
  * Set SD/MMC tap delay
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Implement ioctl APIs which uses MMIO operations
to control RPU operations. Below IOCTLs are supported
in this patch:
  * Get RPU operation mode
  * Set RPU operation mode
  * Configure RPU boot address (OCM/TCM)
  * Configure TCM combined mode
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Implement pin control APIs which uses MMIO operations
to set/get functions for the given pin.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Remove dead code pieces and stale comments.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Cc: Michal Simek <michal.simek@xilinx.com>
Reported-by: Jonas Karlsson <jonas.karlsson@atero.se>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

On ZynqMP the FSBL will configure the system counter. Hence, remove the
initialization of the system counter with hardcoded values from the ATF
and use the setup provided by the bootloader.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1 register.

This is needed for our cortexa53 edac linux driver testing.
These registers need write access from non secure EL1 i.e linux
at the time of setting the above bits.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>

Add build time option 'cadence1' for ZYNQMP_CONSOLE to select the 2nd
UART available in the SoC.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

The GIC area is specified larger than it needs to be and can be reduced.
Which allows reducing the structures required for the translation tables
as well.
This results in a reduction of memory footprint of ca. 4k.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

Parse the parameter structure the FSBL populates, to populate the bl32
and bl33 image structures.

Cc: Sarat Chand Savitala <saratcha@xilinx.com>
Cc: petalinux-dev@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[ SB
 - pass pointers to structs instead of structs
 - handle execution state parameter
 - populate bl32 SPSR
 - add documentation
 - query bootmode and consider missing handoff parameters an error when
   not in JTAG boot mode
]
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Provide a function to retrieve the bootmode.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

Drop the current configuration options for selecting the location of
the ATF and TSP (ZYNQMP_ATF_LOCATION, ZYNQMP_TSP_RAM_LOCATION).
The new configuration provides one default setup (ATF in OCM,
BL32 in DRAM). Additionally, the new configuration options
 - ZYNQMP_ATF_MEM_BASE
 - ZYNQMP_ATF_MEM_SIZE
 - ZYNQMP_BL32_MEM_BASE
 - ZYNQMP_BL32_MEM_SIZE
can be used to freely configure the memory locations used for ATF and
secure payload.

Also, allow setting the BL33 entry point via PRELOADED_BL33_BASE.

Cc: petalinux-dev@xilinx.com
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>

The Xilinx Zynq UltraScale+ MPSOC containes a quad A53 cluster. This
patch adds the platform port for that SoC.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>