Skip to content

GitLab

Switch branch/tag
  1. 11 Jan, 2021 2 commits
  3. 16 Dec, 2020 1 commit
  5. 14 Dec, 2020 2 commits
  7. 09 Dec, 2020 6 commits
  9. 08 Dec, 2020 4 commits
  11. 30 Nov, 2020 1 commit
  13. 28 Oct, 2020 1 commit
    • David Horstmann's avatar
      Use constant stack size with RECLAIM_INIT_CODE · 3ed5606b
      David Horstmann authored 
      

Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.

This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.

Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.

Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.

Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.

Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      3ed5606b
  15. 21 Oct, 2020 1 commit
  17. 20 Oct, 2020 5 commits
  19. 12 Oct, 2020 1 commit
    • Jimmy Brisson's avatar
      Increase type widths to satisfy width requirements · d7b5f408
      Jimmy Brisson authored 
      

Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:

    bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
    The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
    0x3c0U" (32 bits) is less that the right hand operand
    "18446744073709547519ULL" (64 bits).

This also resolves MISRA defects such as:

    bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
    In the expression "3U << 20", shifting more than 7 bits, the number
    of bits in the essential type of the left expression, "3U", is
    not allowed.

Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.

This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,

    92407e73        and     x19, x19, #0xffffffff

from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.

The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.

Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      d7b5f408
  21. 09 Oct, 2020 1 commit
    • Jimmy Brisson's avatar
      Don't return error information from console_flush · 831b0e98
      Jimmy Brisson authored 
      

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      831b0e98
  23. 06 Oct, 2020 1 commit
    • Usama Arif's avatar
      plat/arm: common: add guard for arm_get_rotpk_info_regs · 3bfcc9d7
      Usama Arif authored 
      

Only define arm_get_rotpk_info_regs if ROTPK is in registers,
i.e. (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_REGS_ID). This will
allow platform build without definition of TZ_PUB_KEY_HASH_BASE
if dedicated registers for ROTPK are not available on the platform.

Change-Id: I74ee2d5007f5d876a031a1efca20ebee2dede0c7
Signed-off-by: default avatarUsama Arif <usama.arif@arm.com>
      3bfcc9d7
  25. 05 Oct, 2020 2 commits
  27. 02 Oct, 2020 1 commit
  29. 29 Sep, 2020 5 commits
    • Andre Przywara's avatar
      arm_fpga: Add post-build linker script · 01301b11
      Andre Przywara authored 
      

For the Arm Ltd. FPGAs to run, we need to load several payloads into the
FPGA's memory:
- Some trampoline code at address 0x0, to jump to BL31's entry point.
- The actual BL31 binary at the beginning of DRAM.
- The (generic) DTB image to describe the hardware.
- The actual non-secure payloads (kernel, ramdisks, ...)

The latter is application specific, but the first three blobs are rather
generic.
Since the uploader tool supports ELF binaries, it seems helpful to
combine these three images into one .axf file, as this also simplifies
the command line.

Add a post-build linker script, that combines those three bits into one
ELF file, together with their specific load addresses.
Include a call to "ld" with this linker script in the platform Makefile,
so it will be build automatically. The result will be called "bl31.axf".

Change-Id: I4a90da16fa1e0e83b51d19e5b1daf61f5a0bbfca
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      01301b11
    • Andre Przywara's avatar
      arm_fpga: Add ROM trampoline · f45c6d86
      Andre Przywara authored 
      

The application cores of the FPGAs used in Arm Ltd. start execution at
address 0x0. This is the location of some (emulated) ROM area (which can
be written to by the uploading tool).
Since the arm_fpga port is configured to run from DRAM, we load BL31 to
the beginning of DRAM (mapped at 2GB). This requires some small
trampoline code in the "ROM" to jump to the BL31 entry point.

To avoid some extra magic binary, add a tiny assembly file with that
trivial jump instruction to the tree, so this binary can be created
alongside BL31.

Change-Id: I9e4439fc0f093fa24dd49a8377c9edb030fbb477
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      f45c6d86
    • Andre Przywara's avatar
      arm_fpga: Add devicetree file · b48883c7
      Andre Przywara authored 
      

The FPGA images used in Arm Ltd. focus on CPU cores, so they share a
common platform, with a minimal set of peripherals (interconnect, GIC,
UART).
This allows to support most platforms with a single devicetree file.
The topology and number of CPU cores differ, but those will added at
runtime, in BL31. Other adjustments (GICR size, SPE node, command line)
are also done at this point.

Add the common devicetree file to TF-A's build system, so it can be
build together with BL31. At runtime, the resulting .dtb file should be
uploaded to the address given with FPGA_PRELOADED_DTB_BASE at build time.

Change-Id: I3206d6131059502ec96896e95329865452c9d83e
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      b48883c7
    • Andre Przywara's avatar
      arm_fpga: Remove SPE PMU DT node if SPE is not available · 40a0de19
      Andre Przywara authored 
      

The Statistical Profiling Extension (SPE) is an architectural feature we
can safely detect at runtime. However it still relies on one piece of
platform-specific information: the interrupt line it is connected
to. This requires SPE to be described in a devicetree node.

Since SPE support varies with the CPU cores found on an FPGA image, we
should detect the presence of SPE at runtime, and remove a potentially
existing SPE PMU node from the DT.

This allows to always have the SPE node in a generic devicetree file,
without risking exposing it on a CPU without this feature.

Change-Id: I73d83ea8509b03fe7bba20b9cce8d1335035fa31
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      40a0de19
    • Andre Przywara's avatar
      arm_fpga: Adjust GICR size in DT to match number of cores · 283e5595
      Andre Przywara authored 
      

The size of a GICv3 redistributor region depends on the number of
cores in the system. For the ARM FPGA port, we detect the topology at
runtime, and adjust the CPU DT nodes accordingly.
Now the size of the GICR region must also be adjusted, or Linux will
fail to initialise the GICv3.

Use the newly introduced function to overwrite the GICR size entry in
the GICv3 reg property. We count the number of existing cores by
iterating over the GICR frames until we find the LAST bit set in TYPER.

Change-Id: Ib69565600859de9b1b15ceb8495172cd26d16fce
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      283e5595
  31. 28 Sep, 2020 1 commit
  33. 25 Sep, 2020 1 commit
    • Javier Almansa Sobrino's avatar
      arm_fpga: Add support for unknown MPIDs · 1994e562
      Javier Almansa Sobrino authored 
      

This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.

This feature can be enabled by setting SUPPORT_UNKNOWN_MPID build
option to 1 (enabled by default only on arm_fpga platform).

This feature can be very dangerous on a production image and
therefore it MUST be disabled for Release images.
Signed-off-by: default avatarJavier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I0df7ef2b012d7d60a4fd5de44dea1fbbb46881ba
      1994e562
  35. 24 Sep, 2020 2 commits
  37. 15 Sep, 2020 2 commits