1. 08 Nov, 2017 4 commits
  2. 07 Sep, 2017 2 commits
  3. 29 Aug, 2017 1 commit
  4. 20 Jun, 2017 3 commits
  5. 14 Jun, 2017 1 commit
  6. 03 May, 2017 1 commit
  7. 20 Apr, 2017 2 commits
  8. 20 Mar, 2017 1 commit
    • Douglas Raillard's avatar
      Replace ASM signed tests with unsigned · 355a5d03
      Douglas Raillard authored
      
      
      ge, lt, gt and le condition codes in assembly provide a signed test
      whereas hs, lo, hi and ls provide the unsigned counterpart. Signed tests
      should only be used when strictly necessary, as using them on logically
      unsigned values can lead to inverting the test for high enough values.
      All offsets, addresses and usually counters are actually unsigned
      values, and should be tested as such.
      
      Replace the occurrences of signed condition codes where it was
      unnecessary by an unsigned test as the unsigned tests allow the full
      range of unsigned values to be used without inverting the result with
      some large operands.
      
      Change-Id: I58b7e98d03e3a4476dfb45230311f296d224980a
      Signed-off-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      355a5d03
  9. 30 Jan, 2017 1 commit
    • Jeenu Viswambharan's avatar
      Report errata workaround status to console · 10bcd761
      Jeenu Viswambharan authored
      
      
      The errata reporting policy is as follows:
      
        - If an errata workaround is enabled:
      
          - If it applies (i.e. the CPU is affected by the errata), an INFO
            message is printed, confirming that the errata workaround has been
            applied.
      
          - If it does not apply, a VERBOSE message is printed, confirming
            that the errata workaround has been skipped.
      
        - If an errata workaround is not enabled, but would have applied had
          it been, a WARN message is printed, alerting that errata workaround
          is missing.
      
      The CPU errata messages are printed by both BL1 (primary CPU only) and
      runtime firmware on debug builds, once for each CPU/errata combination.
      
      Relevant output from Juno r1 console when ARM Trusted Firmware is built
      with PLAT=juno LOG_LEVEL=50 DEBUG=1:
      
        VERBOSE: BL1: cortex_a57: errata workaround for 806969 was not applied
        VERBOSE: BL1: cortex_a57: errata workaround for 813420 was not applied
        INFO:    BL1: cortex_a57: errata workaround for disable_ldnp_overread was applied
        WARNING: BL1: cortex_a57: errata workaround for 826974 was missing!
        WARNING: BL1: cortex_a57: errata workaround for 826977 was missing!
        WARNING: BL1: cortex_a57: errata workaround for 828024 was missing!
        WARNING: BL1: cortex_a57: errata workaround for 829520 was missing!
        WARNING: BL1: cortex_a57: errata workaround for 833471 was missing!
        ...
        VERBOSE: BL31: cortex_a57: errata workaround for 806969 was not applied
        VERBOSE: BL31: cortex_a57: errata workaround for 813420 was not applied
        INFO:    BL31: cortex_a57: errata workaround for disable_ldnp_overread was applied
        WARNING: BL31: cortex_a57: errata workaround for 826974 was missing!
        WARNING: BL31: cortex_a57: errata workaround for 826977 was missing!
        WARNING: BL31: cortex_a57: errata workaround for 828024 was missing!
        WARNING: BL31: cortex_a57: errata workaround for 829520 was missing!
        WARNING: BL31: cortex_a57: errata workaround for 833471 was missing!
        ...
        VERBOSE: BL31: cortex_a53: errata workaround for 826319 was not applied
        INFO:    BL31: cortex_a53: errata workaround for disable_non_temporal_hint was applied
      
      Also update documentation.
      
      Change-Id: Iccf059d3348adb876ca121cdf5207bdbbacf2aba
      Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      10bcd761
  10. 23 Jan, 2017 1 commit
    • Masahiro Yamada's avatar
      Use #ifdef for IMAGE_BL* instead of #if · 3d8256b2
      Masahiro Yamada authored
      
      
      One nasty part of ATF is some of boolean macros are always defined
      as 1 or 0, and the rest of them are only defined under certain
      conditions.
      
      For the former group, "#if FOO" or "#if !FOO" must be used because
      "#ifdef FOO" is always true.  (Options passed by $(call add_define,)
      are the cases.)
      
      For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
      checking the value of an undefined macro is strange.
      
      Here, IMAGE_BL* is handled by make_helpers/build_macro.mk like
      follows:
      
        $(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))
      
        $(OBJ): $(2)
                @echo "  CC      $$<"
                $$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) -c $$< -o $$@
      
      This means, IMAGE_BL* is defined when building the corresponding
      image, but *undefined* for the other images.
      
      So, IMAGE_BL* belongs to the latter group where we should use #ifdef
      or #ifndef.
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      3d8256b2
  11. 15 Dec, 2016 1 commit
    • Jeenu Viswambharan's avatar
      Add provision to extend CPU operations at more levels · 5dd9dbb5
      Jeenu Viswambharan authored
      
      
      Various CPU drivers in ARM Trusted Firmware register functions to handle
      power-down operations. At present, separate functions are registered to
      power down individual cores and clusters.
      
      This scheme operates on the basis of core and cluster, and doesn't cater
      for extending the hierarchy for power-down operations. For example,
      future CPUs might support multiple threads which might need powering
      down individually.
      
      This patch therefore reworks the CPU operations framework to allow for
      registering power down handlers on specific level basis. Henceforth:
      
        - Generic code invokes CPU power down operations by the level
          required.
      
        - CPU drivers explicitly mention CPU_NO_RESET_FUNC when the CPU has no
          reset function.
      
        - CPU drivers register power down handlers as a list: a mandatory
          handler for level 0, and optional handlers for higher levels.
      
      All existing CPU drivers are adapted to the new CPU operations framework
      without needing any functional changes within.
      
      Also update firmware design guide.
      
      Change-Id: I1826842d37a9e60a9e85fdcee7b4b8f6bc1ad043
      Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      5dd9dbb5
  12. 12 Dec, 2016 1 commit
    • Soby Mathew's avatar
      AArch32: Fix the stack alignment issue · 9f3ee61c
      Soby Mathew authored
      
      
      The AArch32 Procedure call Standard mandates that the stack must be aligned
      to 8 byte boundary at external interfaces. This patch does the required
      changes.
      
      This problem was detected when a crash was encountered in
      `psci_print_power_domain_map()` while printing 64 bit values. Aligning
      the stack to 8 byte boundary resolved the problem.
      
      Fixes ARM-Software/tf-issues#437
      
      Change-Id: I517bd8203601bb88e9311bd36d477fb7b3efb292
      Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      9f3ee61c
  13. 21 Sep, 2016 2 commits
    • Yatharth Kochar's avatar
      AArch32: Add support for ARM Cortex-A32 MPCore Processor · 03a3042b
      Yatharth Kochar authored
      This patch adds ARM Cortex-A32 MPCore Processor support
      in the CPU specific operations framework. It also includes
      this support for the Base FVP port.
      
      Change-Id: If3697b88678df737c29f79cf3fa1ea2cb6fa565d
      03a3042b
    • Yatharth Kochar's avatar
      AArch32: Common changes needed for BL1/BL2 · 1a0a3f06
      Yatharth Kochar authored
      This patch adds common changes to support AArch32 state in
      BL1 and BL2. Following are the changes:
      
      * Added functions for disabling MMU from Secure state.
      * Added AArch32 specific SMC function.
      * Added semihosting support.
      * Added reporting of unhandled exceptions.
      * Added uniprocessor stack support.
      * Added `el3_entrypoint_common` macro that can be
        shared by BL1 and BL32 (SP_MIN) BL stages. The
        `el3_entrypoint_common` is similar to the AArch64
        counterpart with the main difference in the assembly
        instructions and the registers that are relevant to
        AArch32 execution state.
      * Enabled `LOAD_IMAGE_V2` flag in Makefile for
        `ARCH=aarch32` and added check to make sure that
        platform has not overridden to disable it.
      
      Change-Id: I33c6d8dfefb2e5d142fdfd06a0f4a7332962e1a3
      1a0a3f06
  14. 10 Aug, 2016 1 commit
    • Soby Mathew's avatar
      AArch32: Add support in TF libraries · e33b78a6
      Soby Mathew authored
      This patch adds AArch32 support to cpu ops, context management,
      per-cpu data and spinlock libraries. The `entrypoint_info`
      structure is modified to add support for AArch32 register
      arguments. The CPU operations for AEM generic cpu in AArch32
      mode is also added.
      
      Change-Id: I1e52e79f498661d8f31f1e7b3a29e222bc7a4483
      e33b78a6