GitLab

Tools are built using the compiler specified in `HOSTCC` instead of
reusing the `CC` variable.  By default, gcc is used.

Change-Id: I83636a375c61f4804b4e80784db9d061fe20af87
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Some header files need to be shared between TF and host programs.
For fiptool, two headers are copied to the tools/fiptool directory,
but it looks clumsy.

This commit introduces a new directory, include/tools_share, which
collects headers that should be shared between TF and host programs.

This will clarify the interface exposed to host tools.  We should
add new headers to this directory only when we really need to do so.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

An alignment value of 0x4000 is much easier to type than 16384,
so enhance get_image_align() to recognize a 0x prefix for hexadecimals.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Currently, fiptool uses two linked lists.  One to chain together all
the images and one for all the image descriptors.  Initially this was
done because not all images had a corresponding image descriptor.
This was the case for unknown images which existed in the FIP but
there was no descriptor in the builtin table for them.  When support
for the --blob option came in, we started building descriptors for the
unknown images on the fly.  As a result every image now has a
corresponding image descriptor and therefore it is no longer necessary
to keep track of them separately.

To simplify the design, maintain only a single linked list of image
descriptors.  An image descriptor contains a pointer to the
corresponding image.  If the pointer is NULL, then the descriptor is
skipped in all the operations.  This approach simplifies the traversal
code and avoids redundant lookups.

The linked list of image descriptors is populated based on the
`toc_entries` array.  This means that the order of the images in the
FIP file remains the same across add/remove or create/update
operations.  This is true for all standard images (those specified in
`toc_entries`) but not for those specified via the --blob option.

Change-Id: Ic29a263c86c8f1efdad322b430368c7623782e2d
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

These functions are defined above any calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We should follow the Linux coding style, which is clearly stated in
the docs/user-guide.mk:

  When making changes to the source for submission to the project,
  the source must be in compliance with the Linux style guide

and Documentation/process/coding-style.rst of Linux Kernel says:

  The limit on the length of lines is 80 columns and this is a
  strongly preferred limit.
     [ snip ]
  However, never break user-visible strings such as printk messages,
  because that breaks the ability to grep for them.

The strings for printf() are user-visible, and can exceed the 80
column limit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The strings in usage functions are sent to stdout by printf(),
but some new lines are sent to stderr by fputc(..., stderr).

This inconsistency will break the usage format when users re-direct
stdout or stderr.  Just use printf() for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The current fiptool packs all the images without any padding between
them.  So, the offset to each image has no alignment.  This is not
efficient, for example, when the FIP is read from a block-oriented
device.

For example, (e)MMC is accessed by block-addressing.  The block size
is 512 byte.  So, the best case is each image is aligned by 512 byte
since the DMA engine can transfer the whole of the image to its load
address directly.  The worst case is the offset does not have even
DMA-capable alignment (this is where we stand now).  In this case,
we need to transfer every block to a bounce buffer, then do memcpy()
from the bounce buffer to our final destination.  At least, this
should work with the abstraction by the block I/O layer, but the
CPU-intervention for the whole data transfer makes it really slow.

This commit adds a new option --align to the fiptool.  This option,
if given, requests the tool to align each component in the FIP file
by the specified byte.  Also, add a new Make option FIP_ALIGN for
easier access to this feature; users can give something like
FIP_ALIGN=512 from the command line, or add "FIP_ALIGN := 512" to
their platform.mk file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The struct image has "uuid" and "size" to memorize the field values
they had in the TOC entry.  So, parse_fip() copies them from struct
fip_toc_entry to struct image, then pack_images() copies them back
to struct fip_toc_entry.

The next commit (support --align option) will require to save the
"offset" field as well.  This makes me realize that struct image
can embed struct fip_toc_entry.

This commit will allow the "flags" field to persevere the "update"
command.  At this moment, the "flags" is not used in a useful way.
(Yet, platforms can save their own parameters in the flags field.)
It makes sense to save it unless users explicitly replace the image.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We have same patterns for fwrite().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The global option --verbose should come after the "fiptool".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We need not mention like [--force], [--out <path>] because they are
included in [opts].
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We need not handle the image_head as a special case.  Just use
a double-pointer to simplify the traverse.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

lookup_image(_desc)_from_uuid() traverses the linked list, so it
is not efficient.  We just want to make sure *p points to NULL here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit e0f083a0

 ("fiptool: Prepare ground for expanding the set
of images at runtime") introduced another side effect; the "update"
command now changes the image order in the FIP.

Let's say you have an FIP with BL2, BL31, BL32, BL33.  If you update
for example, BL32 with the "update" command, you will get a new FIP
with BL2, BL31, BL33, BL32, in this order.

It happens like this; remove_image() removes the old image from the
linked list, add_image() adds the new image at the tail of the list,
then images are packed in the new order.  Prior to that commit,
images were updated by replace_image(), but it was deleted by the
re-work.  Revive replace_image() that is re-implemented to work with
the linked list.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The conditional

  if (desc != NULL)
          ...

is always true here because we assert it 6 lines above:

  assert(desc != NULL);

Remove the if-conditional and concatenate the printf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This line should check the existence of the input file, but it is
actually checking the output file.  When -o option is given to the
"update" command, the outfile is unlikely to exist, then parse_fip()
is skipped and an empty FIP file is output.  This is wrong behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The "make fip" shows the content of the generated FIP at the end of
the build.  (This is shown by "fiptool info" command.)

Prior to commit e0f083a0 ("fiptool: Prepare ground for expanding
the set of images at runtime"), the last part of the build log of
 make CROSS_COMPILE=aarch64-linux-gnu- BL33=../u-boot/u-boot.bin fip
was like follows:

 Trusted Boot Firmware BL2: offset=0xB0, size=0x4188, cmdline="--tb-fw"
 EL3 Runtime Firmware BL31: offset=0x4238, size=0x6090, cmdline="--soc-fw"
 Non-Trusted Firmware BL33: offset=0xA2C8, size=0x58B51, cmdline="--nt-fw"

With that commit, now it is displayed like follows:

 Non-Trusted Firmware BL33: offset=0xB0, size=0x58B51, cmdline="--nt-fw"
 EL3 Runtime Firmware BL31: offset=0x58C01, size=0x6090, cmdline="--soc-fw"
 Trusted Boot Firmware BL2: offset=0x5EC91, size=0x4188, cmdline="--tb-fw"

You will notice two differences:
  - the contents are displayed in BL33, BL31, BL2 order
  - the offset values are wrong

The latter is more serious, and means "fiptool info" is broken.

Another interesting change is "fiptool update" every time reverses
the image order.  For example, if you input FIP with BL2, BL31, BL33
in this order, the command will pack BL33, BL31, BL2 into FIP, in
this order.  Of course, the order of components is not a big deal
except that users will have poor impression about this.

The root cause is in the implementation of add_image(); the
image_head points to the last added image.  For example, if you call
add_image() for BL2, BL31, BL33 in this order, the resulted image
chain is:

  image_head -> BL33 -> BL31 -> BL2

Then, they are processed from the image_head in "for" loops:

  for (image = image_head; image != NULL; image = image->next) {

This means images are handled in Last-In First-Out manner.

Interestingly, "fiptool create" is still correct because
add_image_desc() also reverses the descriptor order and the command
works as before due to the double reverse.

The implementation of add_image() is efficient, but it made the
situation too complicated.

Let's make image_head point to the first added image.  This will
add_image() inefficient because every call of add_image() follows
the ->next chain to get the tail.  We can solve it by adopting a
nicer linked list structure, but I am not doing as far as that
because we handle only limited number of images anyway.

Do likewise for add_image_desc().

Fixes: e0f083a0

 ("fiptool: Prepare ground for expanding the set of images at runtime")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We often want to zero out allocated memory.

My main motivation for this commit is to set image::next and
image_desc::next to NULL automatically in the next commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

An image descriptor contains an action and an argument.  The action
indicates the intended operation, as requested by the user.  It can be
pack, unpack or remove.  Factor out setting those fields to a separate
function to minimize code duplication across the various commands that
modify these fields.

Change-Id: I1682958e8e83c4884e435cff6d0833c67726461f
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: If279680a71e7fa1f801d79b8bc2cd47cd9905d33
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: Ife8f198b4c45961e85ed6f4d463daa59009dab1c
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Previously, fiptool only understood a fixed set of images as
specified in tbbr_config.c.  It preserved unknown images during
the update, unpack and remove operations but it was not possible to
explicitly refer to one of those unknown images.

Add a new --blob option to create/update/unpack/remove images that
are not known at compile time.  This is accomplished by specifying
the UUID and filename pair as shown below:

$ ./fiptool create --blob uuid=01234567-89ab-cdef-0123-456789abcdef,file=foo.bin fip.bin
$ ./fiptool info fip.bin
01234567-89ab-cdef-0123-456789abcdef: offset=0x60, size=0x1AA68

Fixes ARM-software/tf-issues#420

Change-Id: Iaac2504b9a4252289c09e73d29645cbe240f3a82
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

To allow operating on images with unknown UUIDs, fiptool needs to
be able to track an arbitrary amount of images and not be limited
to the set of images described by the builtin table.

Convert the table to a list to accommodate this scenario.

Change-Id: I0e6d738eece7795d74fc72d165a3098f223d4414
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: Ie3e43e9f7d31df40a5997047b9bddec0a06fd47f
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: I18a4327e41fc090dcea9a647f7673182ca0ed1d9
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: I62c1a636eb0d9f73fa3a6356e32b5a44f268d421
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Additionally, remove the -o option for the create command
as it is not supported.

Change-Id: I27993a6fc5e3b0b9710e2ec5322e4296bc87d0df
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Fix the following bug:

  $ tools/fiptool/fiptool -v
  Segmentation fault (core dumped)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The `toc_entry` and `image` data structures had a cyclic
relationship.  This patch removes the explicit dependencies and introduces
functions to link them via the UUID.

This change highlights the intent of the code better and makes it more
flexible for future enhancements.

Change-Id: I0c3dd7bfda2a631a3827c8ba4831849c500affe9
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Instead of always calling the top level usage function when an
error is detected, call the command-specific usage function.

For example running `fiptool create` will produce the same output
as `fiptool help create`.  This is more convenient for the user
when they make a mistake.

Change-Id: I60178ab89d47adf93cdfe6d8b5d5f778a5ea3bca

This feature allows one to quickly verify that the expected
image is contained in the FIP without extracting the image and
running sha256sum(1) on it.

The sha256 digest is only shown when the verbose flag is used.

This change requires libssl-dev to be installed in order to build
Trusted Firmware. Previously, libssl-dev was optionally needed only
to support Trusted Board Boot configurations.

Fixes ARM-Software/tf-issues#124

Change-Id: Ifb1408d17f483d482bb270a589ee74add25ec5a6

It should be 'fiptool' instead of 'fiptfool'.

Change-Id: I84ce1b6aaae5b8b33e5781bfe4f9e9cf462edb03

The output is shown only when built with V=1.

Change-Id: I17fef10df6f127f07956a78b478ff3cadba4bd61

fiptool provides a more consistent and intuitive interface compared to
the fip_create program.  It serves as a better base to build on more
features in the future.

fiptool supports various subcommands.  Below are the currently
supported subcommands:

1) info   - List the images contained in a FIP file.
2) create - Create a new FIP file with the given images.
3) update - Update an existing FIP with the given images.
4) unpack - Extract a selected set or all the images from a FIP file.
5) remove - Remove images from a FIP file.  This is a new command that
   was not present in fip_create.

To create a new FIP file, replace "fip_create" with "fiptool create".

To update a FIP file, replace "fip_create" with "fiptool update".

To dump the contents of a FIP file, replace "fip_create --dump" with
"fiptool info".

A compatibility script that emulates the basic functionality of
fip_create is provided.  Existing scripts might or might not work with
the compatibility script.  Users are strongly encouraged to migrate to
fiptool.

Fixes ARM-Software/tf-issues#87
Fixes ARM-Software/tf-issues#108
Fixes ARM-Software/tf-issues#361

Change-Id: I7ee4da7ac60179cc83cf46af890fd8bc61a53330