GitLab

* changes:
  mediatek: mt8183: Support coreboot configuration
  mediatek: mt8183: support system reset
  mediatek: mt8183: pass platform parameters
  mediatek: mt8183: add GPIO driver
  mediatek: mt8183: support system off
  mediatek: mt8183: support CPU hotplug
  mediatek: mt8183: refine GIC driver

cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places. This change is to unify the
cpu_idx as `unsigned int` as underlying API;s `plat_my_core_pos`
returns `unsigned int`

It was discovered via coverity issue CID 354715
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I4f0adb0c596ff1177210c5fe803bff853f2e54ce

- Switch uart driver from Mediatek 8250 to TI 16550
- Enable MULTI_CONSOLE
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Ie3948d9e64d05d29a1f69592792e277b680c4ed4

Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06

* changes:
  Add documentation for CTX_INCLUDE_MTE_REGS
  Enable MTE support in both secure and non-secure worlds

* changes:
  rcar_gen3: drivers: ddr_b: Update DDR setting for H3, M3, M3N
  rcar_gen3: drivers: qos: update QoS setting
  rcar_gen3: drivers: ddr_b: Fix checkpatch errors in headers
  rcar_gen3: drivers: ddr_b: Fix line-over-80s
  rcar_gen3: drivers: ddr_b: Further checkpatch cleanups
  rcar_gen3: drivers: ddr_b: Clean up camel case
  rcar_get3: drivers: ddr_b: Basic checkpatch fixes
  rcar_get3: drivers: ddr: Partly unify register macros between DDR A and B
  rcar_get3: drivers: ddr: Clean up common code

* changes:
  amlogic: Fix includes order
  amlogic: Fix header guards
  amlogic: Fix prefixes in the SoC specific files
  amlogic: Fix prefixes in the PM code
  amlogic: Fix prefixes in the SCPI related code
  amlogic: Fix prefixes in the MHU code
  amlogic: Fix prefixes in the SIP/SVC code
  amlogic: Fix prefixes in the thermal driver
  amlogic: Fix prefixes in the private header file
  amlogic: Fix prefixes in the efuse driver
  amlogic: Fix prefixes in the platform macros file
  amlogic: Fix prefixes in the helpers file
  amlogic: Rework Makefiles
  amlogic: Move the SIP SVC code to common directory
  amlogic: Move topology file to common directory
  amlogic: Move thermal code to common directory
  amlogic: Move MHU code to common directory
  amlogic: Move efuse code to common directory
  amlogic: Move platform macros assembly file to common directory
  amlogic: Introduce unified private header file
  amlogic: Move SCPI code to common directory
  amlogic: Move the SHA256 DMA driver to common directory
  amlogic: Move assembly helpers to common directory
  amlogic: Introduce directory parameters in the makefiles
  meson: Rename platform directory to amlogic

Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673

As part of the code refactoring fix the order of the include files
across all the source files.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice72f687cc26ee881a9051168149467688100cfb

Make the header guards more generic and contextually remove the
GXBB_BL31_PLAT_PARAM_VAL value that is unused on the GXL platform.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I842fa2e084e71280ae17b39c67877e844821a171

Zeus supports the SSBS mechanism and also the new MSR instruction to
immediately apply the mitigation. Hence, the new instruction is utilised
in the Zeus-specific reset function.

Change-Id: I962747c28afe85a15207a0eba4146f9a115b27e7
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.

The full support relies on ubsan.c which has been adapted from code used
by OPTEE.

Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

Sparse warns this:

lib/libc/assert.c:29:6: error: symbol '__assert' redeclared with different type (originally declared at include/lib/libc/assert.h:36) - different modifiers

Add __dead2 to match the header declaration and C definition.

I also changed '__dead2 void' to 'void __dead2' for the consistency
with other parts.

Change-Id: Iefa4f0e787c24fa7e7e499d2e7baf54d4deb49ef
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Common ipi_table needs to be initialized before using any
IPI command (i.e send/receive). Move zynqmp ipi config table
initialization from sip_svc_setup() to zynqmp_config_setup().

Change-Id: Ic8aaa0728a43936cd4c6e1ed590e01ba8f0fbf5b
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>

* changes:
  mmc: stm32_sdmmc2: correctly manage block size
  mmc: stm32_sdmmc2: manage max-frequency property from DT
  stm32mp1: move check_header() to common code
  stm32mp1: keep console during runtime
  stm32mp1: sp_min: initialize MMU and cache earlier
  stm32mp1: add support for LpDDR3
  stm32mp1: use a common function to check spinlock is available
  clk: stm32mp: enable RTCAPB clock for dual-core chips
  stm32mp1: check if the SoC is single core
  stm32mp1: print information about board
  stm32mp1: print information about SoC
  stm32mp1: add watchdog support

As it currently is, python files are formatted using the general rules
in .editorconfig - this means that 8-character hard tabs are used, which
is not the recommended behaviour according to the PEP-8 standard.  This
patch correct this, and additionally limits the line length to 79
characters as required by the standard.

Change-Id: I3b5c0aff12034c4184d4555aab36490cdb3885da
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

When built for coreboot, we want to enable coreboot library to have
better integration. For example, serial console should be initialized by
coreboot_serial instead of hard-coded values.

Most coreboot configuration will enable memory console, which needs
larger XLAT_TABLES so MAX_XLAT_TABLES is increased; and to support that,
TZRAM_SIZE also need to be enlarged.

Change-Id: I08cf22df2fa26e48284e323d22ad8ce73a6ea803
Signed-off-by: Hung-Te Lin <hungte@chromium.org>

Implement system reset handler.

Change-Id: I535ee414616dde8d2b59dec5a723a540a3a1341d
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

Add plat parameter structs to support BL2 to pass
variable-length, variable-type parameters to BL31.
The parameters are structured as a link list.
During BL31 setup time, we traverse the list to process
each parameter.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Ie84cfc9606656fb1d2780a68cadf27e09afa6628

Add GPIO driver.

Change-Id: I8c35ce4ea247f3726081b0bbb95f0930c2b82517
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

- Add PMIC driver
- Add RTC drvier
- Refactor PMIC and RTC to mediatek/common
- Implement system off handler

Change-Id: If76497646ace1b78bc9a5fa0110b652fe512281a
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

- Add DCM driver
- Add SPMC driver
- Implement core and cluster power on/off handlers

Change-Id: I902002f8ea6f98fd73bf259188162b10d3939c72
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

Refine MTK GIC driver.
Remove unused codes.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I39e05ce7aa3c257e237fbc8e661cdde65cbcec7c

A new build flag, CTX_INCLUDE_MTE_REGS, has been added; this patch adds
documentation for it in the User Guide along with instructions of what
different values mean.

Change-Id: I430a9c6ced06b1b6be317edbeff4f5530e30f63a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that support
at EL0. To enable it at ELx for both the non-secure and the secure
world, the compiler flag CTX_INCLUDE_MTE_REGS includes register saving
and restoring when necessary in order to prevent register leakage
between the worlds.

Change-Id: I2d4ea993d6b11654ea0d4757d00ca20d23acf36c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch fixes a coding error, where the size of the protected memory area
was truncated due to an incorrect typecast.

This defect was found by coverity and reported as CID 336781.

Change-Id: I41878b0a9a5e5cd78ef3393fdc7b9ea7f7403ed3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Remove the GXBB prefix where needed and add SoC specific prefixes for
GXBB/GXL.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic3eb3a77ca2d9c779a9dee5cee786e9c16ecdb27

Remove the GXBB prefix from the code in the common directory and add
SoC-specific prefixes in the SoC specific code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic983ef70b0ef23f95088dd8df488d8c42c3bc030