GitLab

* changes:
  perf(spmd): omit sel1 context save if sel2 present
  fix(fvp): spmc optee manifest remove SMC allowlist
  fix: random typos in tf-a code base

Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).

With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2

* changes:
  refactor(plat/st): remove io_dummy code for OP-TEE
  refactor(plat/st): remove BL2 image loading
  refactor(plat/st): rename OP-TEE pager to core

The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147

STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818

OPTEE_PAGER defines are renamed OPTEE_CORE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4c28d3b0a6ed843088a3ef06e3e348ce689fabde

The SPMC at S-EL2 manages S-EL1 execution contexts for SPs. The
currently running SP vCPU state is always saved when the SPMC exits to
SPMD. A fresh vCPU context is always restored when the SPMC is entered
from the SPMD and a SP resumed. For performance optimization reasons
this permits omitting the saving/restoring of the S-EL1 context from
within the EL3 SPMD on entering/exiting the SPMC. The S-EL2 SPMC and
NS-EL1 context save/restore remain done in the SPMD.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I66413ed5983913791ff5c9fc03c590ee65c6ccd7

Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Id610f7e4398e799a2fbd74861274fd684c32db53

The UUID strings used in FW_CONFIG DT are not aligned with UUIDs defined
in include/tools_share/firmware_image_package.h for BL32_EXTRA1 and
TRUSTED_KEY_CERT.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I517f8f9311585931f2cb931e0588414da449b694

Macros PLAT_MARVELL_BOOT_UART* and PLAT_MARVELL_CRASH_UART* are defined
to same values. De-duplicate them into PLAT_MARVELL_UART* macros.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iae5daf7cad6a971e6f3dbe561df3d0174106ca7f

Macros PLAT_MARVELL_BL31_RUN_UART* are not used since commit
d7c4420c

 ("plat/marvell: Migrate to multi-console API").

Remove them.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ec959ef4de87dcfb332c017ad2599bf8af6ffc3

When configuring the UART_BAUD_REG register, the function
console_a3700_core_init() currently only changes the baud divisor field,
leaving other fields to their previous value.

This is incorrect, because the baud divisor is computed with the
assumption that the parent clock rate is 25 MHz, and since the other
fields in this register configure the parent clock, which could have
been changed by U-Boot or Linux.

Fix this function to also configure the other fields so that the UART
parent clock is selected to be the xtal clock.

For example without this change TF-A prints only

    ERROR: a3700_system_off needs to be implemented

followed by garbage after plat_crash_console_init() is called.

After applying this change instead of garbage it also print crash info:

    PANIC at PC : 0x0000000004023800
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81

Merge "fix(plat/marvell/a3720/uart): fix UART clock rate value and divisor calculation" into integration

Morello exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.

Hence enable the workaround (applied to Juno) for Morello that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.

Change-Id: Iabe53bf3c25152052107e08321323e4bde5fbef4
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

Add support for XCK26 silicon which is available on SOM board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ic98213328702903af8a79f487a2868f3e6d60338

This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195

UART parent clock is by default the platform's xtal clock, which is
25 MHz.

The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
  Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.

Change the code for divisor calculation to
  Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.

The final UART divisor for default baudrate 115200 is not affected by
this change.

(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6

* changes:
  TF-A: Document SMC_PCI_SUPPORT option
  SMCCC/PCI: Handle std svc boilerplate
  SMCCC/PCI: Add initial PCI conduit definitions
  SMCCC: Hoist SMC_32 sanitization

The SGI/RD platforms have been using PSCI state ID format as defined in
PSCI version prior to 1.0. This is being changed and the PSCI extended
state ID format as defined in PSCI version 1.1 is being adapted. In
addition to this, the use of Arm recommended PSCI state ID encoding is
enabled as well.

Change-Id: I2be8a9820987a96b23f4281563b6fa22db48fa5f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

Update idle flow in case of last read command timeout.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Idb0552d70d59b23822c38269d0fa9fe9ac0d6975

* changes:
  feat(plat/mediatek/apu): add mt8192 APU device apc driver
  feat(plat/mediatek/apu): add mt8192 APU SiP call support
  feat(plat/mediatek/apu): add mt8192 APU iommap regions
  feat(plat/mediatek/apu): setup mt8192 APU_S_S_4 and APU_S_S_5 permission