GitLab

cci: Wait before reading status register

Add support for Arm System Guidance for Mobile fixed virtual platform

Add support for System Guidance for Mobile platform SGM775

Change-Id: I2442a50caae8f597e5e5949cd48f695cf75d9653
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>

In css platforms where the cpu/cluster management is done by the hardware,
software does need to issue certain scmi requests.

This patch wraps those scmi calls around the HW_ASSISTED_COHERENCY
build option to remove them on platforms that have this hardware support.

Change-Id: Ie818e234484ef18549aa7f977aef5c3f0fc26c27
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>

This omission causes a build error as the definition for
arm_tzc_regions_info_t is needed from plat_arm.h

Change-Id: I26935ee90d3e36ab6a016ff2c4eee4413df3e4e8
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>

Change-Id: I278d6876508800abff7aa2480910306a24de5378
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>

Sgi575 updates

The Arm SGI platforms can switch to using SCMI. So enable support for
SCMI and remove portions of code that would be unused after switching
to SCMI.

Change-Id: Ifd9e1c944745f703da5f970b5daf1be2b07ed14e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

On SGI platforms, the 'CORE_PWRDN_EN' bit of 'CPUPWRCTLR_EL1'
register requires an explicit write to clear it for hotplug and
idle to function correctly. The reset value of this bit is zero
but it still requires this explicit clear to zero. This indicates
that this could be a model related issue but for now this issue can
be fixed be clearing the CORE_PWRDN_EN in the platform specific
reset handler function.

Change-Id: I4222930daa9a3abacdace6b7c3f4a5472ac0cb19
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

Fix build for SEPARATE_CODE_AND_RODATA=0

xlat: psci: Use bool instead of int

Update license information in readme.rst

Fix handler prototype in Trusty generic dispatcher

Change-Id: I77c9cd2d1d6d0122cc49917fa686014bee154589
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I35d5b6a7c219f6f38983b30f157c1ed3808af17f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Define bool type

TF won't build since no memory region is specified
for when SEPARATE_CODE_AND_RODATA=0 it still relies on
the ARM_MAP_BL_RO_DATA region which is never defined for
this case. Create memory region combining code and RO data for
when the build flag SEPARATE_CODE_AND_RODATA=0 to fix this

Change-Id: I6c129eb0833497710cce55e76b8908ce03e0a638
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

This would enable us to write semantically sensible code.

Change-Id: Ie7c75f9c024f671a037448f5c0922174fff3f0ce
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Fix the types of the arguments of trusty_generic_platform_smc()
to match the expected prototype of a runtime service handler
(see rt_svc_handle_t type).

Change-Id: Ie839d116ca924b4b018ea2abbef72a1073da2a32
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Set console function pointers to const

Added information on how disjunctively dual licensed code from
other projects is treated in the TF-A project.

Change-Id: Idca329abba4d36bd3c4fd722ac1556940b9135a2
Signed-off-by: Dan Handley <dan.handley@arm.com>

Early cache enable and coherency fixes

Fix MISRA defects in xlat tables lib and SP805 driver

Set the function pointers in the console struct and the functions
they point to to const since they only need to be defined when
the console is being initialised and should not be changed after

Change-Id: I0574307111e3ab2f13d1a4a74c3fa75532dfa4be
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

Fix violations of MISRA C-2012 Rules 10.1, 10.3 and 10.4.

Change-Id: I13c6acda798c1666892f630f097a23e68748f9e4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix defects of MISRA C-2012 rules 8.13, 10.1, 10.3, 10.4, 10.8, 11.6,
14.4, 15.7, 17.8, 20.10, 20.12, 21.1 and Directive 4.9.

Change-Id: I7ff61e71733908596dbafe2e99d99b4fce9765bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

RAS changes for SGI575 platform

Hikey960: configure pins for PCIe controller

GPIO_089 connects to PCIE_PERST_N. It needs to be configured as
output low.
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

We can enter and exit coherency without any software operations,
but HW_ASSISTED_COHERENCY has stronger implications that are
causing issues. Until these can be resolved, only use the weaker
WARMBOOT_ENABLE_DCACHE_EARLY flag.
Signed-off-by: Andrew F. Davis <afd@ti.com>

When a platform enables its caches before it initializes the
GICC/GICR interface then explicit cache maintenance is not
needed. Remove these here.
Signed-off-by: Andrew F. Davis <afd@ti.com>

If either USE_COHERENT_MEM or HW_ASSISTED_COHERENCY being true
should cause us to not enter the ifdef block, then the logic
is not correct here. Posibly bad use of De Morgan's law?
Fix this.
Signed-off-by: Andrew F. Davis <afd@ti.com>

Add the various flags that are required to build the components needed
to enable the RAS feature on SGI575 platform. By default, all flags
are set to 0, disabling building of all corresponding components.

Change-Id: I7f8536fba895043ef6e397cc33ac9126cb572132
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

Add platform specific changes needed to add support for the RAS
feature on SGI575 platform, including adding a mapping for the
CPER buffer being used on SGI575 platform.

Change-Id: I01a982e283609b5c48661307906346fa2738a43b
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

Add a platform specific handler for RAS interrupts and configure the
platform RAS interrupts for EL3 handling. The interrupt handler passes
control to StandaloneMM code executing in S-EL0, which populates the
CPER buffer with relevant error information. The handler subsequently
invokes the SDEI client which processes the information in the error
information in the CPER buffer. The helper functions
plat_sgi_get_ras_ev_map and plat_sgi_get_ras_ev_map_size would be
defined for sgi platforms in the subsequent patch, which adds sgi575
specific RAS changes.

Change-Id: I490f16c15d9917ac40bdc0441659b92380108d63
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

The secure partition manager reserves chunks of memory which are used
for the S-EL0 StandaloneMM image and the buffers required for
communication between the Non-Secure world with the StandaloneMM
image. Add the memory chunks to relevant arrays for mapping the
regions of memory with corresponding attributes.

Change-Id: If371d1afee0a50ca7cacd55e16aeaca949d5062b
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

The SGI platforms need to allocate memory for CPER buffers. These
platform buffers would be placed between the shared reserved memory
and the per cpu stack memory, thus the need to redefine stack base
pointer for these platforms. This patch allows each board in ARM
platform to define the PLAT_SP_IMAGE_STACK_BASE.

Change-Id: Ib5465448b860ab7ab0f645f7cb278a67acce7be9
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

Include arm_spm_def.h in the platform_def.h file. Without this
inclusion, we get build errors like

In file included from services/std_svc/spm/sp_setup.c:12:0:
services/std_svc/spm/sp_setup.c: In function 'spm_sp_setup':
services/std_svc/spm/sp_setup.c:61:57: error: 'PLAT_SPM_BUF_BASE'
  undeclared (first use in this function)
  write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, PLAT_SPM_BUF_BASE);

Now that the platform_def.h includes arm_spm_def.h, remove inclusion
of platform_def.h in arm_spm_def.h to remove the circular dependency.

Change-Id: I5225c8ca33fd8d288849524395e436c3d56daf17
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

Add a null pointer check for the error record probe
function -- avoids a panic in case a platform has not defined it.

Change-Id: I1139fa0df33297a12ec16615cacd07540925f991
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

The board_arm_def.h header file needs to be included via the platform
definition header. Not doing so, results in a redefinition error of
PLAT_ARM_MAX_BL31_SIZE macro, if defined in the platform definition
file.

Change-Id: I1d178f6e8a6a41461e7fbcab9f6813a2faa2d82b
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>