GitLab

A small set of misc changes to ensure correctness before the v2.3
release.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I5b4e35b3b46616df0453cecff61f5a414951cd62

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I5a7ae778999295f3453b7ab0bfc26351e545fb8f

 - Include the platform documentation in the table of contents.

 - Add a title for the document. Without this, the platform
   documentation was listed under a 'Description' title on page
   https://trustedfirmware-a.readthedocs.io/en/latest/plat/index.html



 - Change TF-A git repository URL to point to tf.org (rather than the
   deprecated read-only mirror on Github).

 - Fix the restructuredText syntax for the FIP command line. It was
   not displayed at all on the rendered version.

Change-Id: I7a0f062bcf8e0dfc65e8f8bdd6775c497a47e619
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

A single chip platform requires five mmap entries and a corresponding
number of translation tables. For every additional chip in the system,
three additional mmap entries are required to map the shared SRAM and
the IO regions. A corresponding number of additional translation
tables are required as well.

Change-Id: I1332a1305f2af62181387cf36954f6fb0e6f11ed
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

fix coverity reported issues
1. uninitialized var,
2. check for negative val on unsigned variable
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: I28b7517135ba6c1ba0df04f0c73189cf84ba89e6

The arm_fpga platform code contains an dubious line to initialise some
timer. On closer inspection this turn out to be bogus, as this was only
needed on some special (older) FPGA board, and is actually not needed on
the current model. Also the base address was wrong anyways.

Remove the code entirely.

Change-Id: I02e71aea645051b5addb42d972d7a79f04b81106
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

To support compatibility with previous GICv3 driver version
this patch:
- restores original API for gicr_read_ipriority() and
gicr_wrtite_ipriority() functions;
- adds accessor functions for GICR_XXX0,1 registers, e.g.
GICR_IGROUPR0, GICR_ICFGR0, GICR_ICFGR1, etc.

Change-Id: I796a312a61665ff384e3d9de2f4b3c60f700b43b
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

RD-Daniel uses GIC-Clayton as its interrupt controller which is an
implementation of GICv4.1 architecture. Hence for RD-Daniel, enable
GICv4 extension support.

Change-Id: I45ae8c82376f8fe8fc0666306822ae2db74e71b8
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

GIC-Clayton supports multichip operation mode which allows it to connect
upto 16 other GIC-Clayton instances. GIC-Clayton's multichip programming
and operation remains same as GIC-600 with a minor change in the
SPI_BLOCKS and SPI_BLOCK_MIN shifts to accommodate additional SPI
ranges. So identify if the GIC v4 extension is enabled by the platform
makefile and appropriately select the SPI_BLOCKS and SPI_BLOCK_MIN
shifts.

Change-Id: I95fd80ef16af6c7ca09e2335539187b133052d41
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

* changes:
  FVP: Add support for GICv4 extension
  TF-A: Add GICv4 extension for GIC driver
  TF-A GICv3 driver: Add extended PPI and SPI range

This patch adds support for GICv4 extension for FVP platform.

Change-Id: Ia389b61266af669b1ca9b999a8b76476cab214f4
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for GICv4 extension.
New `GIC_ENABLE_V4_EXTN` option passed to gicv3.mk makefile
was added, and enables GICv4 related changes when set to 1.
This option defaults to 0.

Change-Id: I30ebe1b7a98d3a54863900f37eda4589c707a288
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds code to parse memory range information passed by
coreboot, and a simple helper to test whether a specific address belongs
to a range. This may be useful for coreboot-using platforms that need to
know information about the system's memory layout (e.g. to check whether
an address passed in via SMC targets valid DRAM).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3bea326c426db27d1a8b7d6e17418e4850e884b4

Increased the maximum size of BL2 image in order to
accommodate the BL2 image when TF-A build with no compiler
optimization for ARM platform.

Note: As of now, "no compiler optimization" build works
only when TRUSTED_BOOT_BOARD option is set to 0.

This change is verified using below CI configuration:
1. juno-no-optimize-default:juno-linux.uboot
2. fvp-no-optimize-default,fvp-default:fvp-tftf-fip.tftf-aemv8a-debug

Change-Id: I5932621237f8acd1b510682388f3ba78eae90ea4
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

bakery_lock_normal.c uses the raw register accessor, read_sctlr(_el3)
to check whether the dcache is enabled.

Using is_dcache_enabled() is cleaner, and a good abstraction for
the library code like this.

A problem is is_dcache_enabled() is declared in the local header,
lib/xlat_tables_v2/xlat_tables_private.h

I searched for a good place to declare this helper. Moving it to
arch_helpers.h, closed to cache operation helpers, looks good enough
to me.

I also changed the type of 'is_cached' to bool for consistency,
and to avoid MISRA warnings.

Change-Id: I9b016f67bc8eade25c316aa9c0db0fa4cd375b79
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch provides support for GICv3.1 extended PPI and SPI
range. The option is enabled by setting to 1 and passing
`GIC_EXT_INTID` build flag to gicv3.mk makefile.
This option defaults to 0 with no extended range support.

Change-Id: I7d09086fe22ea531c5df51a8a1efd8928458d394
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Default board configuration was set to bcm958742k which is not present
in current codebase. This causes a default platform build to fail.
Changing to bcm958742t.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Ie24f94ef0ef316ff56fe142df5de45d70ba93c28

Attempts to address MISRA compliance issues in BL1, BL2, and BL31 code.
Mainly issues like not using boolean expressions in conditionals,
conflicting variable names, ignoring return values without (void), adding
explicit casts, etc.

Change-Id: If1fa18ab621b9c374db73fa6eaa6f6e5e55c146a
Signed-off-by: John Powell <john.powell@arm.com>

with commit a6ea06f5

, the way platform includes gicv3 files has been
modified, this patch adapts to new method of including gicv3 files
for arm_fpga platform.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ic5ccae842b39b7db06d4f23c5738b174c42edf63

Merge "xlat lib v2: Add support to pass shareability attribute for normal memory region" into integration

* changes:
  doc: brcm: Add documentation file for brcm stingray platform
  drivers: Add SPI Nor flash support
  drivers: Add iproc spi driver
  drivers: Add emmc driver for Broadcom platforms
  Add BL31 support for Broadcom stingray platform
  Add BL2 support for Broadcom stingray platform
  Add bl31 support common across Broadcom platforms
  Add bl2 setup code common across Broadcom platforms
  drivers: Add support to retrieve plat_toc_flags

Present framework restricts platform to pass desired shareability attribute
for normal memory region mapped in MMU. it defaults to inner shareability.

There are platforms where memories (like SRAM) are not placed at snoopable
region in advaned interconnect like CCN/CMN hence snoopable transaction is
not possible to these memory. Though These memories could be mapped in MMU
as MT_NON_CACHEABLE, data caches benefits won't be available.

If these memories are mapped as cacheable with non-shareable attribute,
when only one core is running like at boot time, MMU data cached could be
used for faster execution. Hence adding support to pass the shareability
attribute for memory regions.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I678cb50120a28dae4aa9d1896e8faf1dd5cf1754

Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: I5e2c1220e9694d6ba771cc90daa0e70e967eebe6

Add SPI Nor flash support

Change-Id: I0cde3fdb4dcad5bcaf445b3bb48e279332bd28af
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>

Add iproc spi driver

Change-Id: I652efab1efd9c487974dae9cb9d98b9b8e3759c4
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>

Add emmc driver for Broadcom platforms

Change-Id: I126a6dfccd41062cb0b856f2c2fb1f724730b95e
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>