GitLab

docker (container) is another way to build the documentation and fortunately
there is already a docker image (sphinxdoc/sphinx) with sphinx so we can use
it to generate the documentation.

Change-Id: I06b0621cd7509a8279655e828680b92241b9fde4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>

* changes:
  plat: imx8mp: Add the basic support for i.MX8MP
  plat: imx8m: Move the gpc hw reg to a separate header file

This patch cleans up MISRA C violations in the IO driver files.  Some
things did not make sense to fix or would require sweeping changes
but the simple issues have been resolved.

Defects Fixed

File                        Line Rule
drivers/io/io_fip.c         39   MISRA C-2012 Rule 5.6 (required)
drivers/io/io_fip.c         52   MISRA C-2012 Rule 8.9 (advisory)
drivers/io/io_fip.c         60   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_fip.c         285  MISRA C-2012 Rule 8.9 (advisory)
drivers/io/io_fip.c         336  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_fip.c         340  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_fip.c         342  MISRA C-2012 Rule 15.4 (advisory)
drivers/io/io_memmap.c      30   MISRA C-2012 Rule 5.6 (required)
drivers/io/io_memmap.c      32   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_memmap.c      85   MISRA C-2012 Rule 11.8 (required)
drivers/io/io_semihosting.c 66   MISRA C-2012 Rule 11.8 (required)
drivers/io/io_storage.c     73   MISRA C-2012 Rule 5.9 (advisory)
drivers/io/io_storage.c     116  MISRA C-2012 Rule 13.4 (advisory)
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9b1b2b684588d4eaab674ed4ed04f3950dd21f4

* changes:
  arm_fpga: Predefine DTB and BL33 load addresses
  arm_fpga: Add Klein and Matterhorn support
  arm_fpga: Support more CPU clusters

while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.

To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06cd39dbefaf492682d9bbb0c82b950dd31fb416

Merge "Add myself and Andre Przywara as code owners for the Arm FPGA platform port" into integration

* changes:
  plat: marvell: armada: mcbin: squash several IO windows into one
  plat: marvell: armada: fix BL32 extra parameters usage
  drivers: marvell: Fix the LLC SRAM driver
  plat: marvell: armada: a8k: change CCU LLC SRAM mapping
  plat: marvell: armada: adjust trusted DRAM size to match OP-TEE OS
  drivers: marvell: mg_conf_cm3: pass comphy lane number to AP FW
  plat: marvell: armada: move mg conf related code to appropriate driver
  marvell: comphy: start AP FW when comphy AP mode selected
  drivers: marvell: mg_conf_cm3: add basic driver
  tools: doimage: change the binary image alignment to 16
  tools: doimage: migrate to mbedtls v2.8 APIs

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I6d3949a971fada5a086b788dbe274f8451fcfc0d

BL2 size gets increased due to the libfdt library update and 
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1

Fixed build failure by increasing BL2 image size limit by 4Kb.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

- Fix the line address macro
- LLC invalidate and enable before ways lock for allocation
- Add support for limited SRAM size allocation
- Add SRAM RW test function

Change-Id: I1867ece3047566ddd7931bd7472e1f47fb42c8d4
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Since the AP process can be enabled on different setups, the information
about used comphy lane should be passed to AP FW. For instance:
- A8K development board uses comphy lane 2 for eth 0
- cn913x development board uses comphy lane 4 for eth 0

Change-Id: Icf001fb3eea4d9c24c09384e49844ecaf8655ad2
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

After configuring comphy to AP mode also start AP FW.

Change-Id: Ib28977d7ee643575a818ba17f69dea0b7e8e0df4
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change the binary image alignment from 4 to 16.
The PKCS signature verification fails for unaligned images.

Change-Id: Ieb08dc3ea128790f542ad93e3c948117567a65af
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Replace deprecated mbedtls_sha256 with mbedtls_sha256_ret
The mbedtls_pk_parse_key does not work correctly anymore
with the DER buffer embedded in the secure image extentson
using the buffer size as the the key length.
Move to mbedtls_pk_parse_subpubkey API that handles such
case correctly.
The DER format already contains the key length, so there
is no particular reason to supply it to the key parser.
Update the doimage version to 3.3

Change-Id: I0ec5ee84b7d1505b43138e0b7a6bdba44a6702b6
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a

Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).

Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.

Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a