Skip to content

GitLab

Switch branch/tag
  1. 13 Oct, 2020 1 commit
  3. 12 Oct, 2020 1 commit
  5. 09 Oct, 2020 1 commit
  7. 07 Oct, 2020 1 commit
  9. 05 Oct, 2020 2 commits
  11. 02 Oct, 2020 1 commit
    • Andre Przywara's avatar
      libfdt: Upgrade libfdt source files · 3b456661
      Andre Przywara authored 
      

Update the libfdt source files, the upstream commit is 73e0f143b73d
("libfdt: fdt_strerror(): Fix comparison warning").

This brings us the fixes for the signed/unsigned comparison warnings,
so platforms can enable -Wsign-compare now.

Change-Id: I303d891c82ffea0acefdde27289339db5ac5a289
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      3b456661
  13. 01 Oct, 2020 1 commit
  15. 29 Sep, 2020 2 commits
    • Andre Przywara's avatar
      fdt: Add function to adjust GICv3 redistributor size · 9f7bab42
      Andre Przywara authored 
      

We now have code to detect the CPU topology at runtime, and can also
populate the CPU nodes in a devicetree accordingly. This is used by the
ARM FPGA port, for instance.
But also a GICv3 compatible interrupt controller provides MMIO frames
per core, so the size of this region needs to be adjusted in the DT,
to match the number of cores as well.

Provide a generic function to find the GICv3 interrupt controller in
the DT, then adjust the "reg" entry to match the number of detected
cores. Since the size of the GICR frame per cores differs between
GICv4 and GICv3, this size is supplied as a parameter to the function.
The caller should determine the applicable value by either hardcoding
it or by observing GICR_TYPER.VLPIS.

Change-Id: Ic2a6445c2c5381a36bf24263f52fcbefad378c05
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      9f7bab42
    • Andre Przywara's avatar
      drivers: arm: gicv3: Allow detecting number of cores · 79d89e3d
      Andre Przywara authored 
      

A GICv3 interrupt controller will be instantiated for a certain number
of cores. This will result in the respective number of GICR frames. The
last frame will have the "Last" bit set in its GICR_TYPER register.

For platforms with a topology unknown at build time (the Arm FPGAs, for
instance), we need to learn the number of used cores at runtime, to size
the GICR region in the devicetree accordingly.

Add a generic function that iterates over all GICR frames until it
encounters one with the "Last" bit set. It returns the number of cores
the GICv3 has been configured for.

Change-Id: I79f033c50dfc1c275aba7122725868811abcc4f8
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      79d89e3d
  17. 28 Sep, 2020 1 commit
  19. 25 Sep, 2020 2 commits
  21. 24 Sep, 2020 3 commits
    • Yann Gautier's avatar
      drivers: st: add missing includes in ETZPC header · 0adc87c7
      Yann Gautier authored 
      

Depending on compiler, the issue about bool or uint*_t not defined can
appear.
Correct this by adding stdbool.h and stdint.h includes in etzpc.h.

Change-Id: If1419dc511efbe682459fa4a776481fa52a38aa3
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      0adc87c7
    • Lionel Debieve's avatar
      nand: raw_nand: fix timeout issue in nand_wait_ready · ea306945
      Lionel Debieve authored 
      

nand_wait_ready is called with a millisecond delay
but the timeout used a micro second. Fixing the conversion
in the timeout call.
The prototype of the function is also changed to use an unsigned int
parameter.

Change-Id: Ia3281be7980477dfbfdb842308d35ecd8b926fb8
Signed-off-by: default avatarLionel Debieve <lionel.debieve@st.com>
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      ea306945
    • Yann Gautier's avatar
      fdts: stm32mp1: realign device tree with kernel · 277d6af5
      Yann Gautier authored 
      

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A

The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.

There are 4 packages available, for which  the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.

STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.

Some reordering is done in other files, and realign with kernel DT files.

The DDR files are generated with our internal tool, no changes in the
registers values.

Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      277d6af5
  23. 22 Sep, 2020 1 commit
  25. 18 Sep, 2020 1 commit
  27. 15 Sep, 2020 1 commit
  29. 11 Sep, 2020 1 commit
  31. 09 Sep, 2020 1 commit
  33. 03 Sep, 2020 1 commit
  35. 02 Sep, 2020 1 commit
    • Pramod Kumar's avatar
      lib: cpu: Check SCU presence in DSU before accessing DSU registers · 942013e1
      Pramod Kumar authored 
      

The DSU contains system control registers in the SCU and L3 logic to
control the functionality of the cluster. If "DIRECT CONNECT" L3
memory system variant is used, there won't be any L3 cache,
snoop filter, and SCU logic present hence no system control register
will be present. Hence check SCU presence before accessing DSU register
for DSU_936184 errata.
Signed-off-by: default avatarPramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I1ffa8afb0447ae3bd1032c9dd678d68021fe5a63
      942013e1
  37. 01 Sep, 2020 1 commit
  39. 31 Aug, 2020 1 commit
  41. 28 Aug, 2020 2 commits
  43. 26 Aug, 2020 1 commit
  45. 20 Aug, 2020 2 commits
  47. 18 Aug, 2020 3 commits
    • Manish V Badarkhe's avatar
      runtime_exceptions: Update AT speculative workaround · 3b8456bd
      Manish V Badarkhe authored 
      As per latest mailing communication [1], we decided to
update AT speculative workaround implementation in order to
disable page table walk for lower ELs(EL1 or EL0) immediately
after context switching to EL3 from lower ELs.

Previous implementation of AT speculative workaround is available
here: 45aecff0

AT speculative workaround is updated as below:
1. Avoid saving and restoring of SCTLR and TCR registers for EL1
   in context save and restore routine respectively.
2. On EL3 entry, save SCTLR and TCR registers for EL1.
3. On EL3 entry, update EL1 system registers to disable stage 1
   page table walk for lower ELs (EL1 and EL0) and enable EL1
   MMU.
4. On EL3 exit, restore SCTLR and TCR registers for EL1 which
   are saved in step 2.

[1]:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-July/000586.html



Change-Id: Iee8de16f81dc970a8f492726f2ddd57e7bd9ffb5
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      3b8456bd
    • Manish V Badarkhe's avatar
      el3_runtime: Rearrange context offset of EL1 sys registers · cb55615c
      Manish V Badarkhe authored 
      

SCTLR and TCR registers of EL1 plays role in enabling/disabling of
page table walk for lower ELs (EL0 and EL1).
Hence re-arranged EL1 context offsets to have SCTLR and TCR registers
values one after another in the stack so that these registers values
can be saved and restored using stp and ldp instruction respectively.

Change-Id: Iaa28fd9eba82a60932b6b6d85ec8857a9acd5f8b
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      cb55615c
    • Manish V Badarkhe's avatar
      Add wrapper for AT instruction · 86ba5853
      Manish V Badarkhe authored 
      

In case of AT speculative workaround applied, page table walk
is disabled for lower ELs (EL1 and EL0) in EL3.
Hence added a wrapper function which temporarily enables page
table walk to execute AT instruction for lower ELs and then
disables page table walk.

Execute AT instructions directly for lower ELs (EL1 and EL0)
assuming page table walk is enabled always when AT speculative
workaround is not applied.

Change-Id: I4ad4c0bcbb761448af257e9f72ae979473c0dde8
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      86ba5853
  49. 14 Aug, 2020 3 commits
    • Manish Pandey's avatar
      plat/arm: enable support for Plat owned SPs · 990d972f
      Manish Pandey authored 
      

For Arm platforms SPs are loaded by parsing tb_fw_config.dts and
adding them to SP structure sequentially, which in-turn is appended to
loadable image list.

With recently introduced dualroot CoT for SPs where they are owned
either by SiP or by Platform. SiP owned SPs index starts at SP_PKG1_ID
and Plat owned SPs index starts at SP_PKG5_ID. As the start index of SP
depends on the owner, there should be a mechanism to parse owner of a SP
and put it at the correct index in SP structure.

This patch adds support for parsing a new optional field "owner" and
based on it put SP details(UUID & Load-address) at the correct index in
SP structure.

Change-Id: Ibd255b60d5c45023cc7fdb10971bef6626cb560b
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      990d972f
    • Jimmy Brisson's avatar
      Specify signed-ness of constants · e1d5be56
      Jimmy Brisson authored 
      

We relyed on the default signed-ness of constants, which is usually
signed. This can create MISRA violations, such as:

     bl1/bl1_main.c:257:[MISRA C-2012 10.8 (required)] Cast of composite
     expression off essential type signed to essential type unsigned

These constants were only used as unsigned, so this patch makes them
explicitly unsigned.

Change-Id: I5f1310c881e936077035fbb1d5ffb449b45de3ad
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      e1d5be56
    • Jimmy Brisson's avatar
      Prevent colliding identifiers · d74c6b83
      Jimmy Brisson authored 
      

There was a collision between the name of the typedef in the CASSERT and
something else, so we make the name of the typedef unique to the
invocation of DEFFINE_SVC_UUID2 by appending the name that's passed into
the macro. This eliminates the following MISRA violation:

    bl1/bl1_main.c:233:[MISRA C-2012 Rule 5.6 (required)] Identifier
    "invalid_svc_uuid" is already used to represent a typedef.

This also resolves MISRA rule 5.9.

These renamings are as follows:
  * tzram -> secram. This matches the function call name as it has
  sec_mem in it's  name
  * fw_config_base -> config_base. This file does not mess with
  hw_conig, so there's little chance of confusion

Change-Id: I8734ba0956140c8e29b89d0596d10d61a6ef351e
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      d74c6b83
  51. 12 Aug, 2020 2 commits
    • Manish Pandey's avatar
      dualroot: add chain of trust for Platform owned SPs · 2947412d
      Manish Pandey authored 
      

For dualroot CoT there are two sets of SP certificates, one owned by
Silicon Provider(SiP) and other owned by Platform. Each certificate can
have a maximum of 4 SPs.

This patch reduces the number of SiP owned SPs from 8 to 4 and adds
the remaining 4 to Plat owned SP.
Plat owned SP certificate is signed using Platform RoT key and
protected against anti-rollback using the Non-trusted Non-volatile
counter.

Change-Id: Idc3ddd87d6d85a5506a7435f45a6ec17c4c50425
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      2947412d
    • Manish Pandey's avatar
      cert_create: add Platform owned secure partitions support · 23d5f03a
      Manish Pandey authored 
      

Add support to generate a certificate named "plat-sp-cert" for Secure
Partitions(SP) owned by Platform.
Earlier a single certificate file "sip-sp-cert" was generated which
contained hash of all 8 SPs, with this change SPs are divided into
two categories viz "SiP owned" and "Plat owned" containing 4 SPs each.

Platform RoT key pair is used for signing.
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
Change-Id: I5bd493cfce4cf3fc14b87c8ed1045f633d0c92b6
      23d5f03a
  53. 11 Aug, 2020 1 commit
    • Stefan Chulski's avatar
      plat: marvell: ap807: implement workaround for errata-id 3033912 · 5e4c97d0
      Stefan Chulski authored 
      

ERRATA ID: RES-3033912 - Internal Address Space Init state causes
a hang upon accesses to [0xf070_0000, 0xf07f_ffff]
Workaround: Boot Firmware (ATF) should configure CCU_RGF_WIN(4) to
split [0x6e_0000, 0xff_ffff] to values [0x6e_0000, 0x6f_ffff] and
[0x80_0000, 0xff_ffff] that cause accesses to the segment of
[0xf070_0000, 0xf07f_ffff] to act as RAZWI. Reuse common
work-around code for both AP806 and AP807.

Change-Id: Ia91a4802d02917d1682faa0c81571093d1687d97
Signed-off-by: default avatarStefan Chulski <stefanc@marvell.com>
      5e4c97d0
  55. 10 Aug, 2020 1 commit
    • Alexei Fedorov's avatar
      TF-A AMU extension: fix detection of group 1 counters. · f3ccf036
      Alexei Fedorov authored 
      

This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.

Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      f3ccf036