GitLab

Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT.

timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.

timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.

Cherry picked from OP-TEE implementation [1].
  [1] commit 33d30a74502b ("core: timeout detection support")

Minor:
- Remove stm32mp platform duplicated implementation.
- Add new include in marvell ble.mk
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaef6d43c11a2e6992fb48efdc674a0552755ad9c

This patch adds support for ARMv8.3-PAuth in BL1 SMC calls and
BL2U image for firmware updates by programming APIAKey_EL1 registers
and enabling Pointer Authentication in EL3 and EL1 respectively.

Change-Id: I875d952aba8242caf74fb5f4f2d2af6f0c768c08
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Change-Id: I1ea2bf088f1e001cdbd377cbfb7c6a2866af0422
Signed-off-by: Imre Kis <imre.kis@arm.com>

* changes:
  gpio: stm32_gpio: do not mix error code types
  fdts: stm32mp1: move FDCAN to PLL4_R
  mmc: increase delay between ACMD41 retries
  crypto: stm32_hash: align stm32_hash_update() prototype

* changes:
  qemu/qemu_sbsa: Adding memory mapping for both FLASH0/FLASH1
  qemu/qemu_sbsa: Adding Qemu SBSA platform

* changes:
  mediatek: mt8183: add EMI MPU driver for DRAM protection
  mediatek: mt8183: add DEVAPC driver to control protection

Change-Id: I84f8a99be2dcdf7c51fbecdb324df8e2f32cc855
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

LTDC modifies the clock frequency to adapt it to the display. Such
frequency change is not detected by the FDCAN driver that instead
caches the value at probe and pretends to use it later.

This change fixes the issue by moving the FDCAN to PLL4_R,
leaving the LTDC alone on PLL4_Q.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I8230868b2b5fd6deb6e3f9dc3911030d8d484c58

In the SD Specification, Power Up Diagram of Card figure, the Timeout
value for initialization process (ACMD41 command retries) is 1 second.
Align to match MMC cards (in mmc_send_op_cond()) and Linux kernel code,
and set the delay between ACMD41 command retries to 10ms.

Change-Id: I2e07cb9944e7d7b72f2d4b13e0505e6751458091
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Use size_t for length parameter in header file, as in .c file.

Change-Id: I310f2a6159cde1c069b4f814f6558c2488c203ec
Signed-off-by: Yann Gautier <yann.gautier@st.com>

a5ds only has always-on power domain and there is no power control
present. However, without the pwr_domain_off handler, the kernel
panics when the user will try to switch off secondary cores. The
a5ds_pwr_domain_off handler will prevent kernel from crashing,
i.e. the kernel will attempt but fail to shut down the secondary CPUs
if the user tries to switch them offline.

Change-Id: I3c2239a1b6f035113ddbdda063c8495000cbe30c
Signed-off-by: Usama Arif <usama.arif@arm.com>

Add EMI MPU driver for DRAM protection.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I0355e084184b5396ad8ac99fff6ef9d050fb5e96

Add DEVAPC driver to control protection.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: I6a6dd1c0bffa372b6df2cb604ca5e02eabbb9d26

Change-Id: I645442d52a295706948e2cac88c36c1a3cb0bc47
Signed-off-by: Imre Kis <imre.kis@arm.com>

Add the missing flag for aarch32 XIP memory mode. It was
previously added in aarch64 only.
Minor: Correct the aarch64 missing flag.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac0a7581a1fd580aececa75f97deb894858f776f

Change-Id: I3b866e927d93f4b690aa4891940fc8afabf4146e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

This patch adds mapping for secure FLASH0 for qemu/virt and
qemu/qemu_sbsa platforms. This change is targeted for sbsa but since both
platforms share common code, changes in common defines was necessary.

For qemu_sbsa, this patch adds necessary mapping in order to boot without
semi-hosting from secure FLASH0. EFI need to stay in FLASH1 (share it with
variables) since it need to "run in place" in non secure domain. Changes
for this are under RFC at edk2-platforms mailing list:
https://patches.linaro.org/patch/171327/


(edk2-platforms/Platform/Qemu/SbsaQemu/SbsaQemu.dsc).

In docs qemu/virt is described as using semi-hosting, therefore this change
should be orthogonal to existing assumptions while giving possibility to
store both bl1 and fip in FLASH0 at some point (additional changes required
for that).
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I782bc3637c91c01eaee680b3c5c408e24b4b6e28

This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.

Fixes ARM-software/tf-issues#602
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c

- Updated Linaro release version number to 19.06
- Updated links to Linaro instructions and releases
- Removed the Linaro old releases link
Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: Ib786728106961e89182b42183e7b889f6fc74190

Not tested on FVP Model.

Change-Id: Iedebc5c1fbc7ea577e94142b7feafa5546f1f4f9
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>

* changes:
  stm32mp1: add authentication support for stm32image
  bsec: move bsec_mode_is_closed_device() service to platform
  crypto: stm32_hash: Add HASH driver

* changes:
  amlogic: g12a: Add support for the S905X2 (G12A) platform
  amlogic: makefile: Use PLAT variable when possible
  amlogic: sha_dma: Move register mappings to platform header

* changes:
  a5ds: add multicore support
  a5ds: Hold the secondary cpus in pen rather than panic

* changes:
  rpi4: Add initial documentation file
  rpi4: Add stdout-path to device tree
  rpi4: Add GIC maintenance interrupt to GIC DT node
  rpi4: Cleanup memory regions, move pens to first page
  rpi4: Reserve resident BL31 region from non-secure world
  rpi4: Amend DTB to advertise PSCI
  rpi4: Determine BL33 entry point at runtime
  rpi4: Accommodate "armstub8.bin" header at the beginning of BL31 image
  Add basic support for Raspberry Pi 4
  rpi3: Allow runtime determination of UART base clock rate
  FDT helper functions: Respect architecture in PSCI function IDs
  FDT helper functions: Add function documentation

* changes:
  Migrate ARM platforms to use the new GICv3 API
  Adding new optional PSCI hook pwr_domain_on_finish_late
  GICv3: Enable multi socket GIC redistributor frame discovery

This patch changes implementation for disabling Secure Cycle
Counter. For ARMv8.5 the counter gets disabled by setting
SDCR.SCCD bit on CPU cold/warm boot. For the earlier
architectures PMCR register is saved/restored on secure
world entry/exit from/to Non-secure state, and cycle counting
gets disabled by setting PMCR.DP bit.
In 'include\aarch32\arch.h' header file new
ARMv8.5-PMU related definitions were added.

Change-Id: Ia8845db2ebe8de940d66dff479225a5b879316f8
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

* changes:
  hikey: fix to load FIP by partition table.
  hikey960: fix to load FIP by partition table
  drivers: partition: support different block size