- 14 Dec, 2020 2 commits
-
-
Samuel Holland authored
The H6 has a "secure port controller" similar to the A64/H5, but with more ports and a different register layout. Split the platform-specific parts out into a header, and add the missing MMIO base address. Signed-off-by: Samuel Holland <samuel@sholland.org> Change-Id: I3703868bc595459ecf9568b9d1605cb1be014bf5
-
Samuel Holland authored
H6 has a reorganized R_PRCM compared to A64/H5, with the security switch at a different offset. Until now, we did not notice, because the switch has no effect unless the secure mode e-fuse is blown. Since we are adding more platform-specific CCU registers, move them to their own header, and out of the memory map (where they do not belong). Signed-off-by: Samuel Holland <samuel@sholland.org> Change-Id: Ie77476db0515080954eaa2e32bf6c3de657cda86
-
- 13 Feb, 2020 1 commit
-
-
Samuel Holland authored
The ARISC vector area consists of 0x4000 bytes before the beginning of usable SRAM. Still, it is technically a part of SRAM A2, so include it in the memory definition. This avoids the confusing practice of subtracting from the beginning of the SRAM region when referencing the ARISC vectors. Signed-off-by: Samuel Holland <samuel@sholland.org> Change-Id: Iae89e01aeab93560159562692e03e88306e2a1bf
-
- 08 Nov, 2018 1 commit
-
-
Antonio Nino Diaz authored
All identifiers, regardless of use, that start with two underscores are reserved. This means they can't be used in header guards. The style that this project is now to use the full name of the file in capital letters followed by 'H'. For example, for a file called "uart_example.h", the header guard is UART_EXAMPLE_H. The exceptions are files that are imported from other projects: - CryptoCell driver - dt-bindings folders - zlib headers Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 20 Oct, 2018 2 commits
-
-
Andre Przywara authored
PSCI requires a core to turn itself off, which we can't do properly by just executing an algorithm on that very core. As a consequence we just put a core into WFI on CPU_OFF right now. To fix this let's task the "arisc" management processor (an OpenRISC core) with that task of asserting reset and turning off the core's power domain. We use a handcrafted sequence of OpenRISC instructions to achieve this, and hand this data over to the new sunxi_execute_arisc_code() routine. The commented source code for this routine is provided in a separate file, but the ATF code contains the already encoded instructions as data. The H6 uses the same algorithm, but differs in the MMIO addresses, so provide a SoC (family) specific copy of that code. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
Andre Przywara authored
At the moment we map as much of the DRAM into EL3 as possible, however we actually don't use it. The only exception is the secure DRAM for BL32 (if that is configured). To decrease the memory footprint of ATF, we save on some page tables by reducing the memory mapping to the actually required regions: SRAM, device MMIO, secure DRAM and U-Boot (to be used later). This introduces a non-identity mapping for the DRAM regions. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
- 28 Jun, 2018 1 commit
-
-
Andre Przywara authored
The relative VER_REG *offset* is the same across all known SoCs, so we can define this offset near it's user. Remove it from the memory map. Reported-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
- 15 Jun, 2018 3 commits
-
-
Andre Przywara authored
Some peripherals are TrustZone aware, so they need to be configured to be accessible from non-secure world, as we don't need any of them being exclusive to the secure world. This affects some clocks, DMA channels and the Secure Peripheral Controller (SPC). The latter controls access to most devices, but is not active unless booting with the secure boot fuse burnt. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
Samuel Holland authored
sun50i_cpu_on will be used by the PSCI implementation to initialize secondary cores for SMP. Unfortunately, sun50i_cpu_off is not usable by PSCI directly, because it is not possible for a CPU to use this function to power itself down. Power cannot be shut off until the outputs are clamped, and MMIO does not work once the outputs are clamped. But at least CPU0 can shutdown the other cores early in the BL31 boot process and before shutting down the system. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
Samuel Holland authored
The Allwinner A64 SoC is quite popular on single board computers. It comes with four Cortex-A53 cores in a singe cluster and the usual peripherals for set-top box/tablet SoC. The ATF platform target is called "sun50i_a64". [Andre: adapted to amended directory layout, removed unneeded definitions ] Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-