- 19 Mar, 2020 8 commits
-
-
Varun Wadekar authored
We set deepest power state when offlining a core but that may not be requested by non-secure sw which controls idle states. It will re-init this info from non-secure software when the core come online. This patch resets the power state in the non-secure world context to allow it to start with a clean slate. Change-Id: Iafd92cb2a49571aa6eeb9580beaaff4ba55a87dc Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
TZSRAM loses power during System suspend, so the entire contents are copied to TZDRAM before Sysem Suspend entry. The warmboot code verifies and restores the contents to TZSRAM during System Resume. This patch removes the code that sets up CPU vector to point to TZSRAM during System Resume as a result. The trampoline code can also be completely removed as a result. Change-Id: I2830eb1db16efef3dfd96c4e3afc41a307588ca1 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
This patch disables the code to program reset vector for secondary CPUs to a different entry point, than cold boot. The cold boot entry point has the ability to differentiate between a cold boot and a warm boot, that is controlled by the PROGRAMMABLE_RESET_ADDRESS macro. By reusing the same entry point, we can lock the CPU reset vector during cold boot. Change-Id: Iad400841d57c139469e1d29b5d467197e11958c4 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Leo He authored
In SE suspend, switch SE clock source to CLK_M, to make sure SE clock is on when saving SE context Change-Id: I57c559825a3ec8e0cc35f7a389afc458a5eed0cb Signed-off-by: Leo He <leoh@nvidia.com> Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
This patch increases the assert logging level for all Tegra platforms to VERBOSE, to print the actual assertion condition to the console, improving debuggability. Change-Id: If3399bde63fa4261522cab984cc9c49cd2073358 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Kalyani Chidambaram authored
This patch enables dual execution optimized translations for EL2 and EL3 CPU exception levels. Change-Id: I28fe98bb05687400f247e94adf44a1f3a85c38b1 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Kalyani Chidambaram authored
This patch updates 'plat_my_core_pos' handler to call 'plat_core_pos_from_mpidr' instead of implementing the same logic at two places. Change-Id: I1e56adaa10dc2fe3440e5507e0e260d8932e6657 Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
-
Kalyani Chidambaram authored
This patch updates the t194_nvg.h header file received from the CPU team to v6.7. Change-Id: I5d25dfc60448e14b7085250946bd002fcb80a774 Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
-
- 11 Mar, 2020 9 commits
-
-
Kalyani Chidambaram authored
The platform sip is reporting a "unsupported function ID" if the smc function id is not pmc command. When actually the smc function id could be specific to the tegra sip handler. This patch removes the error reported. Change-Id: Ia3c8545d345746c5eea6d75b9e6957ca23ae9ca3 Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
-
Varun Wadekar authored
This patch enables on-chip timer1 interrupts for Tegra210 platforms. Change-Id: Ic7417dc0e69264d7c28aa012fe2322cd30838f3e Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
This patch exports the SMMU register read/write handlers for platforms. Change-Id: If92f0d3ce820e4997c090b48be7614407bb582da Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Pritesh Raithatha authored
SMMU and MC registers are saved as part of the System Suspend sequence. The register list includes some NS world SMMU registers that need to be saved by NS world software instead. All that remains as a result are the MC registers. This patch moves code to MC file as a result and renames all the variables and defines to use the MC prefix instead of SMMU. The Tegra186 and Tegra194 platform ports are updated to provide the MC context register list to the parent driver. The memory required for context save is reduced due to removal of the SMMU registers. Change-Id: I83a05079039f52f9ce91c938ada6cd6dfd9c843f Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
-
Varun Wadekar authored
This patch fixes the SE clock ID being used for Tegra186 and Tegra194 SoCs. Previous assumption, that both SoCs use the same clock ID, was incorrect. Change-Id: I1ef0da5547ff2e14151b53968cad9cc78fee63bd Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Pritesh Raithatha authored
The platform code already contains the initial set of MC SID security configs to be locked during boot. This patch adds some more configs to the list. Since the reset value of these registers is already as per expectations, there is no need to change it. MC SID security configs - PTCR, - MIU6R, MIU6W, MIU7R, MIU7W, - MPCORER, MPCOREW, - NVDEC1SRD, NVDEC1SRD1, NVDEC1SWR. Change-Id: Ia9a1f6a6b6d34fb2787298651f7a4792a40b88ab Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
-
Jeetesh Burman authored
The BL3-1 firmware code is stored in TZSRAM on Tegra194 platforms. This memory loses power when we enter System Suspend and so its contents are stored to TZDRAM, before entry. This opens up an attack vector where the TZDRAM contents might be tampered with when we are in the System Suspend mode. To mitigate this attack the SE engine calculates the hash of entire TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The WB0 code will validate the TZDRAM and match the hash with the one in PMC scratch. This patch adds driver for the SE engine, with APIs to calculate the hash and store to PMC scratch registers. Change-Id: I04cc0eb7f54c69d64b6c34fc2ff62e4cfbdd43b2 Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
-
Jeetesh Burman authored
This patch saves the TZDRAM base and size values to secure scratch registers, for the WB0. The WB0 reads these values and uses them to verify integrity of the TZDRAM aperture. Change-Id: I2f5fd11c87804d20e2698de33be977991c9f6f33 Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
-
kalyani chidambaram authored
armclang displays warnings for extra parentheses, leading to build failures as warnings are treated as errors. This patch removes the extra parentheses to fix this issue. Change-Id: Id2fd6a3086590436eecabc55502f40752a018131 Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
-
- 09 Mar, 2020 10 commits
-
-
Varun Wadekar authored
This patch saves the TZDRAM base and size values to secure scratch registers, for the WB0. The WB0 reads these values and uses them to verify integrity of the TZDRAM aperture. Change-Id: Ic70914cb958249f06cb58025a24d13734a85e16e Signed-off-by: Jeetesh Burman <jburman@nvidia.com> Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Jeetesh Burman authored
The BL3-1 firmware code is stored in TZSRAM on Tegra186 platforms. This memory loses power when we enter System Suspend and so its contents are stored to TZDRAM, before entry. This opens up an attack vector where the TZDRAM contents might be tampered with when we are in the System Suspend mode. To mitigate this attack the SE engine calculates the hash of entire TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The WB0 code will validate the TZDRAM and match the hash with the one in PMC scratch. This patch adds driver for the SE engine, with APIs to calculate the hash and store SE SHA256 hash-result to PMC scratch registers. Change-Id: Ib487d5629225d3d99bd35d44f0402d6d3cf27ddf Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
-
Jeetesh Burman authored
This patch enables the bpmp-ipc driver for Tegra186 platforms, to ask BPMP firmware to toggle SE clock. Change-Id: Ie63587346c4d9b7e54767dbee17d0139fa2818ae Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
-
Mithun Maragiri authored
ERRATA_A57_829520 disables "indirect branch prediction" for EL1 on cpu reset, leading to 15% drop in CPU performance with coremark benchmarks. Tegra210 already has a hardware fix for ARM BUG#829520,so this errata is not needed. This patch disables the errata to get increased performance numbers. Change-Id: I0b42e8badd19a8101f6a55d80eb2d953597d3c20 Signed-off-by: Mithun Maragiri <mmaragiri@nvidia.com>
-
Pravin authored
This patch adds support for memqual miu 4,5. The MEMQUAL engine has miu0 to miu7 in which miu6 and miu7 is hardwired to bypass SMMU. So only miu0 to miu5 support is provided. Change-Id: Ib350334eec521e65f395f1c3205e2cdaf464ebea Signed-off-by: Pravin <pt@nvidia.com>
-
Stefan Kristiansson authored
As bpmp-fw is running at the same time as ATF, and the mss client reconfiguration sequence involves performing a hot flush resets on bpmp, there is a chance that bpmp-fw is trying to perform accesses while the hot flush is active. Therefore, the mss client reconfigure has been moved to System Suspend resume fw and bootloader, and it can be removed from here. Change-Id: I34019ad12abea9681f5e180af6bc86f2c4c6fc74 Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
-
Varun Wadekar authored
This patch removes usage of bakery_locks from the FIQ handler, as it creates unnecessary dependency whenever the watchdog timer interrupt fires. All operations inside the interrupt handler are 'reads', so no need for serialization. Change-Id: I3f675e610e4dabc5b1435fdd24bc28e424f5a8e4 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Harvey Hsieh authored
Tegra210B01 SoCs support atomic context save for the two SE hardware engines. Tegra210 SoCs have support for only one SE engine and support a software based save/restore mechanism instead. This patch updates the SE driver to make this change. Change-Id: Ia5e5ed75d0fe011f17809684bbc2ed2338925946 Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
-
kalyani chidambaram authored
Update the list to include PMC registers that the NS world cannot access even with smc calls. Change-Id: I588179b56ebc0c29200b55e6d61535fd3a7a3b7e Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
-
Varun Wadekar authored
This patch resets the macros to update the CPUACTLR_ELx to make them generic for all exception levels. Change-Id: I33e9b860efb543934b654a2f5d775135df7f1aa6 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
- 05 Mar, 2020 1 commit
-
-
Varun Wadekar authored
Commit ac71344e moved the base address for the MMIO aperture of the console inside the console_t struct. As a result, the driver should now save the MMIO base address to console_t at offset marked by the CONSOLE_T_BASE macro. This patch updates the SPE console driver to use the CONSOLE_T_BASE macro to save/access the MMIO base address. Signed-off-by: Varun Wadekar <vwadekar@nvidia.com> Change-Id: I42afc2608372687832932269108ed642f218fd40
-
- 03 Mar, 2020 1 commit
-
-
Max Shvetsov authored
Renamed the structure according to a SPMD refactoring introduced in <c585d07aa> since this structure is used to service both EL1 and EL2 as opposed to serving only EL1. Change-Id: I23b7c089e53f617157a4b4e6443acce50d85c3b5 Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
-
- 25 Feb, 2020 3 commits
-
-
Andre Przywara authored
Since now the generic console_t structure holds the UART base address as well, let's use that generic location and drop the UART driver specific data structure at all. Change-Id: I75dbfafb67849833b3f7b5047e237651e3f553cd Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
Andre Przywara authored
Since now the generic console_t structure holds the UART base address as well, let's use that generic location and drop the UART driver specific data structure at all. Change-Id: Ifd6aff1064ba1c3c029cdd8a83f715f7a9976db5 Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
Andre Przywara authored
Since now the generic console_t structure holds the UART base address as well, let's use that generic location and drop the UART driver specific data structure at all. Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-
- 20 Feb, 2020 8 commits
-
-
Varun Wadekar authored
There are chances a denial-of-service attack, if an attacker removes the SPE firmware from the system. The console driver would end up waiting for the firmware to respond indefinitely. The console driver must detect such scenarios and uninit the interface as a result. This patch adds a timeout to the interaction with the SPE firmware and uninits the interface if it times out. Change-Id: I06f27a858baed25711d41105b4110865f1a01727 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
Tegra210 SoCs need the sc7entry-fw to enter System Suspend mode, but there might be certain boards that do not have this firmware blob. To stop the NS world from issuing System suspend entry commands on such devices, we ned to disable System Suspend from the PSCI "features". This patch removes the System suspend handler from the Tegra PSCI ops, so that the framework will disable support for "System Suspend" from the PSCI "features". Original change by: kalyani chidambaram <kalyanic@nvidia.com> Change-Id: Ie029f82f55990a8b3a6debb73e95e0e218bfd1f5 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
Code complexity is a good indication of maintainability versus testability of a piece of software. ISO26262 introduces the following thresholds: complexity < 10 is accepted 10 <= complexity < 20 has to be justified complexity >= 20 cannot be accepted Rationale is that number of test cases to fully test a piece of software can (depending on the coverage metrics) grow exponentially with the number of branches in the software. This patch removes redundant conditionals from 'ipc_send_req_atomic' handler to reduce the McCabe Cyclomatic Complexity for this function Change-Id: I20fef79a771301e1c824aea72a45ff83f97591d5 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
This patch provides platforms an opportunity to relocate the BL32 image, during cold boot. Tegra186 platforms, for example, relocate BL32 images to TZDRAM memory as the previous bootloader relies on BL31 to do so. Change-Id: Ibb864901e43aca5bf55d8c79e918b598c12e8a28 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
Code complexity is a good indication of maintainability versus testability of a piece of software. ISO26262 introduces the following thresholds: complexity < 10 is accepted 10 <= complexity < 20 has to be justified complexity >= 20 cannot be accepted Rationale is that number of test cases to fully test a piece of software can (depending on the coverage metrics) grow exponentially with the number of branches in the software. This patch removes redundant conditionals from 'bl31_early_platform_setup' handler to reduce the McCabe Cyclomatic Complexity for this function. Change-Id: Ifb628e33269b388f9323639cd97db761a7e049c4 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
kalyani chidambaram authored
This patch sets the "secure" bit to mark the PMC hardware block as accessible only from the secure world. This setting must be programmed during cold boot and System Resume. The sc7entry-fw, running on the COP, needs access to the PMC block to enter System Suspend state, so "unlock" the PMC block before passing control to the COP. Change-Id: I00e39a49ae6b9f8c8eafe0cf7ff63fe6a67fdccf Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
-
Varun Wadekar authored
This patch modifies the delay timer driver to switch to the ARM secure physical timer instead of using Tegra's on-chip uS timer. The secure timer is not accessible to the NS world and so eliminates an important attack vector, where the Tegra timer source gets switched off from the NS world leading to a DoS attack for the trusted world. This timer is shared with the S-EL1 layer for now, but later patches will mark it as exclusive to the EL3 exception mode. Change-Id: I2c00f8cb4c48b25578971c626c314603906ad7cc Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Pritesh Raithatha authored
This patch locks most of the stream id security config registers as per HW guidance. This patch keeps the stream id configs unlocked for the following clients, to allow some platforms to still function, until they make the transition to the latest guidance. - ISPRA - ISPFALR - ISPFALW - ISPWA - ISPWA1 - ISPWB - XUSB_DEVR - XUSB_DEVW - XUSB_HOSTR - XUSB_HOSTW - VIW - VIFALR - VIFALW Change-Id: I66192b228a0a237035938f498babc0325764d5df Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
-