GitLab

This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.

Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Memmap video memory as uncached normal memory by adding flag
'MT_NON_CACHEABLE' in mmap_add_dynamic_region().
This improves the time taken for clearing the non-overlapping video
memory:

test conditions: 32MB memory size, EMC running at 1866MHz, t186
1) without MT_NON_CACHEABLE: 30ms ~ 40ms
<3>[  133.852885]  vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[  133.860471] _tegra_set_vpr_params[120]: begin
<3>[  133.896481] _tegra_set_vpr_params[123]: end
<3>[  133.908944]  vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[  133.916397] _tegra_set_vpr_params[120]: begin
<3>[  133.956369] _tegra_set_vpr_params[123]: end
<3>[  133.970394]  vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[  133.977934] _tegra_set_vpr_params[120]: begin
<3>[  134.013874] _tegra_set_vpr_params[123]: end
<3>[  134.025666]  vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[  134.033512] _tegra_set_vpr_params[120]: begin
<3>[  134.065996] _tegra_set_vpr_params[123]: end
<3>[  134.075465]  vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[  134.082923] _tegra_set_vpr_params[120]: begin
<3>[  134.113119] _tegra_set_vpr_params[123]: end
<3>[  134.123448]  vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[  134.130790] _tegra_set_vpr_params[120]: begin
<3>[  134.162523] _tegra_set_vpr_params[123]: end
<3>[  134.172413]  vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[  134.179772] _tegra_set_vpr_params[120]: begin
<3>[  134.209142] _tegra_set_vpr_params[123]: end

2) with MT_NON_CACHEABLE: 10ms ~ 18ms
<3>[  102.108702]  vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[  102.116296] _tegra_set_vpr_params[120]: begin
<3>[  102.134272] _tegra_set_vpr_params[123]: end
<3>[  102.145839]  vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[  102.153226] _tegra_set_vpr_params[120]: begin
<3>[  102.164201] _tegra_set_vpr_params[123]: end
<3>[  102.172275]  vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[  102.179638] _tegra_set_vpr_params[120]: begin
<3>[  102.190342] _tegra_set_vpr_params[123]: end
<3>[  102.197524]  vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[  102.205085] _tegra_set_vpr_params[120]: begin
<3>[  102.216112] _tegra_set_vpr_params[123]: end
<3>[  102.224080]  vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[  102.231387] _tegra_set_vpr_params[120]: begin
<3>[  102.241775] _tegra_set_vpr_params[123]: end
<3>[  102.248825]  vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[  102.256069] _tegra_set_vpr_params[120]: begin
<3>[  102.266368] _tegra_set_vpr_params[123]: end
<3>[  102.273400]  vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[  102.280672] _tegra_set_vpr_params[120]: begin
<3>[  102.290929] _tegra_set_vpr_params[123]: end

Change-Id: I5f604064ce7b8b73ea9ad5860156ae5e2c6cc42a
Signed-off-by: Ken Chang <kenc@nvidia.com>

This patch includes the missing stdbool.h header from flowctrl.h
and bpmp_ivc.c files.

Change-Id: If60d19142b1cb8ae663fbdbdf1ffe45cbbdbc1b2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch exports the SMMU register read/write handlers for platforms.

Change-Id: If92f0d3ce820e4997c090b48be7614407bb582da
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

SMMU and MC registers are saved as part of the System Suspend sequence.
The register list includes some NS world SMMU registers that need to be
saved by NS world software instead. All that remains as a result are
the MC registers.

This patch moves code to MC file as a result and renames all the
variables and defines to use the MC prefix instead of SMMU. The
Tegra186 and Tegra194 platform ports are updated to provide the MC
context register list to the parent driver. The memory required for
context save is reduced due to removal of the SMMU registers.

Change-Id: I83a05079039f52f9ce91c938ada6cd6dfd9c843f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Commit ac71344e

 moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.

This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I75dbfafb67849833b3f7b5047e237651e3f553cd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

There are chances a denial-of-service attack, if an attacker
removes the SPE firmware from the system. The console driver
would end up waiting for the firmware to respond indefinitely.
The console driver must detect such scenarios and uninit the
interface as a result.

This patch adds a timeout to the interaction with the SPE
firmware and uninits the interface if it times out.

Change-Id: I06f27a858baed25711d41105b4110865f1a01727
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Code complexity is a good indication of maintainability versus
testability of a piece of software.

ISO26262 introduces the following thresholds:

    complexity < 10 is accepted
    10 <= complexity < 20 has to be justified
    complexity >= 20 cannot be accepted

Rationale is that number of test cases to fully test a piece of
software can (depending on the coverage metrics) grow exponentially
with the number of branches in the software.

This patch removes redundant conditionals from 'ipc_send_req_atomic'
handler to reduce the McCabe Cyclomatic Complexity for this function

Change-Id: I20fef79a771301e1c824aea72a45ff83f97591d5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes violations for the following MISRA rules

* Rule 5.7  "A tag name shall be a unique identifier"
* Rule 10.1 "Operands shall not be of an inappropriate essential type"
* Rule 10.3 "The value of an expression shall not be assigned to an object
             with a narrower essential type or of a different essential type
             category"
* Rule 10.4 "Both operands of an operator in which the usual arithmetic
             conversions are performed shall have the same essential type
             category"
* Rule 20.7 "Expressions resulting from the expansion of macro parameters
             shall be enclosed in parentheses"
* Rule 21.1 "#define and #undef shall not be used on a reserved identifier
             or reserved macro name"

Change-Id: I83cbe659c2d72e76dd4759959870b57c58adafdf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the per-platform, weakly defined TZDRAM setup handler,
as all affected platforms implement the actual handler.

Change-Id: I95d04b2a771bc5d673e56b097d45c493fa388ee8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the header file paths to include debug.h
from the right location.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If303792d2169158f436ae6aa5b6d7a4f88e28f7b

This patch fixes a coding error, where the size of the protected memory area
was truncated due to an incorrect typecast.

This defect was found by coverity and reported as CID 336781.

Change-Id: I41878b0a9a5e5cd78ef3393fdc7b9ea7f7403ed3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates all Tegra platforms to use the new multi console API.

Change-Id: I27c0c7830a86e26491dea9991a689f0b01e4dbf0
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>

Now it is needed to use the full path of the common header files.

Commit 09d40e0e

 ("Sanitise includes across codebase") provides more
information.

Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

This patch udpates the SPE console driver to prepend '\r' to
'\n'. This fixes the alignment of prints seen by the host
machines on their UART ports.

Tested by collecting the logs from host PC using Cutecom

Reported by: Mustafa Bilgen <mbilgen@nvidia.com>

Change-Id: I6e0b412bd71ff5eb889582071df8c157da5175ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the state machine to "not present" if the bpmp
firmware is not found in the system during boot. The suspend
handler also checks now if the interface exists, before updating
the internal state machine.

Reported by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

Change-Id: If8fd7f8e412bb603944555c24826855226e7f48c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the PMC's DPD registers on resuming from System
Suspend, for all Tegra210 platforms that support the sc7entry-fw.

Change-Id: I7881ef0a5f609ed28b158bc2f4016abea3c7f305
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

This patch adds suspend and resume handlers for the BPMP
interface. Mark the interface as "suspended" before entering
System Suspend and verify that BPMP is alive on exit.

Change-Id: I74ccbc86125079b46d06360fc4c7e8a5acfbdfb2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to enter System Suspend on Tegra210 platforms
without the traditional BPMP firmware. The BPMP firmware will no longer
be supported on Tegra210 platforms and its functionality will be
divided across the CPU and sc7entry-fw.

The sc7entry-fw takes care of performing the hardware sequence required
to enter System Suspend (SC7 power state) from the COP. The CPU is required
to load this firmware to the internal RAM of the COP and start the sequence.
The CPU also make sure that the COP is off after cold boot and is only
powered on when we want to start the actual System Suspend sequence.

The previous bootloader loads the firmware to TZDRAM and passes its base and
size as part of the boot parameters. The EL3 layer is supposed to sanitize
the parameters before touching the firmware blob.

To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
program PMC's scratch register #210, with appropriate values. Without these
settings the warmboot code wont be able to get the device out of System
Suspend.

Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to find the last standing CPU
in a cluster.

Change-Id: Id018f1958f458c772c7b0c52af8ddf7532b1cec5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds helper functions to help platforms with cluster state entry
and exit decisions.

* tegra_fc_ccplex_pgexit_lock(): lock CPU power ungate
* tegra_fc_ccplex_pgexit_unlock(): unlock CPU power ungate
* tegra_fc_is_ccx_allowed(): CCx state entry allowed on this CPU?

Change-Id: I6490d34bf380dc03ae203eb3028f61984f06931c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the error print displayed when bpmp init
fails. On platforms that do not load the bpmp firmware, this
print is seen on every cluster idle and powerdown request,
cluttering the logs.

Change-Id: I9e30007a913080406052fc32d5360ff70a019d75
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

On earlier Tegra platforms, e.g. Tegra210, the watchdog timer's FIQ interrupt
is not direclty wired to the GICD. It goes to the flow controller instead, for
power state management. But the flow controller can route the FIQ to the GICD,
as a PPI, which can then get routed to the target CPU.

This patch adds routines to enable/disable routing the legacy FIQ used by
the watchdog timers, to the GICD.

Change-Id: Idd07c88c8d730b5f0e93e3a6e4fdc59bdcb2161b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to the bpmp_ipc driver to allow clients to
enable/disable clocks to hardware blocks. Currently, the API only
supports SE devices.

Change-Id: I9a361e380c0bcda59f5a92ca51c86a46555b2e90
Signed-off-by: steven kao <skao@nvidia.com>

This patch removes the usage of this platform config, as it is always
enabled by all the supported platforms.

Change-Id: Ie7adb641adeb3604b177b6960b797722d60addfa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

There are Tegra platforms which have limited UART ports and so
all the components have to share the console. The SPE helps out
by collecting all the logs in such cases and prints them on the
shared UART port.

This patch adds a driver to communicate with the SPE driver, which
in turn provides the console.

Change-Id: Ie750520b936b8bed0ab1d876f03fc0a3490a85a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra SoCs currently do not have a SMMU register at address 0xFFFFFFFF.
This patch changes the search criteria, to look for this marker, to
calculate the size of the saved context.

Change-Id: I15d91945ecb78267f91c45f37985dbb2327ca3ae
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra memctrl driver sets up the TZDRAM fence during boot and
system suspend exit. This patch provides individual platforms with
handlers to perform custom steps during TZDRAM setup.

Change-Id: Iee094d6ca189c6dd24f1147003c33c99ff3a953b
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch returns error if BPMP initialization fails. The platform
code marks the cluster as "runnning" since we wont be able to get
it into the low power state without BPMP.

Change-Id: I86f51d478626240bb7b4ccede8907674290c5dc1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames all the secure scratch registers to reflect their
usage.

This is a list of all the macros being renamed:

- SECURE_SCRATCH_RSV1_* -> SCRATCH_RESET_VECTOR_*
- SECURE_SCRATCH_RSV6 -> SCRATCH_SECURE_BOOTP_FCFG
- SECURE_SCRATCH_RSV11_* -> SCRATCH_SMMU_TABLE_ADDR_*
- SECURE_SCRATCH_RSV53_* -> SCRATCH_BOOT_PARAMS_ADDR_*
- SECURE_SCRATCH_RSV55_* -> SCRATCH_TZDRAM_ADDR_*

NOTE: Future SoCs will have to define these macros to
      keep the drivers functioning.

Change-Id: Ib3ba40dd32e77b92b47825f19c420e6fdfa8b987
Signed-off-by: Steven Kao <skao@nvidia.com>

The Tegra memctrl driver sets up the TZDRAM fence during boot and
system suspend exit. This patch provides individual platforms with
handlers to perform platform specific steps, e.g. enable encryption,
save base/size to secure scratch registers.

Change-Id: Ifaa2e0eac20b50f77ec734256544c36dd511bd63
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the driver to communicate with the BPMP firmware on Tegra
SoCs, starting Tegra186. BPMP firmware is responsible for clock enable/
disable requests, module resets among other things.

MRQ is short for Message ReQuest. This is the general purpose, multi channel
messaging protocol that is widely used to communicate with BPMP. This is further
divided into a common high level protocol and a peer-specific low level protocol.
The higher level protocol specifies the peer identification, channel definition
and allocation, message structure, message semantics and message dispatch process
whereas the lower level protocol defines actual message transfer implementation
details. Currently, BPMP supports two lower level protocols - Token Mail Operations
(TMO), IVC Mail Operations (IMO).

This driver implements the IMO protocol. IMO is implemented using the IVC (Inter-VM
Communication) protocol which is a lockless, shared memory messaging queue management
protocol.

The IVC peer is expected to perform the following as part of establishing a connection
with BPMP.

1. Initialize the channels with tegra_ivc_init() or its equivalent.
2. Reset the channel with tegra_ivc_channel_reset. The peer should also ensure that
   BPMP is notified via the doorbell.
3. Poll until the channel connection is established [tegra_ivc_channel_notified() return
   0]. Interrupt BPMP with doorbell each time after tegra_ivc_channel_notified() return
   non zero.

The IPC driver currently supports reseting the GPCDMAand XUSB_PADCTL hardware blocks. In
future, more hardware blocks would be supported.

Change-Id: I52a4bd3a853de6c4fa410904b6614ff1c63df364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables CPU access configuration register to allow
accesses to the TZRAM aperture on chips after Tegra186.

Change-Id: I0898582f8bd6fd35360ecf8ca5cee21fe35f7aab
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch saves the TZDRAM_BASE value to secure RSVD55
scratch register. The warmboot code uses this register to
restore the settings on exiting System Suspend.

Change-Id: Id76175c2a7d931227589468511365599e2908411
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Introduce platform handlers to program the MSS settings.
This allows the current driver to scale to future chips.

Change-Id: I40a27648a1a3c73b1ce38dafddc1babb6f0b0d9b
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch cleans the Memory controller's interrupt status
register, before exiting to the non-secure world during
cold boot. This is required as we observed that the MC's
arbitration bit is set before exiting the secure world.

Change-Id: Iacd01994d03b3b9cbd7b8a57fe7ab5b04e607a9f
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

This patch moves the TZDRAM base address to SCRATCH55_LO due
to security concerns. The HI and LO address bits are packed
into SCRATCH55_LO for the warmboot firmware to restore.
SCRATCH54_HI is still being used for backward compatibility,
but would be removed eventually.

The scratch registers are populated as:
* RSV55_0 = CFG1[12:0] | CFG0[31:20]
* RSV55_1 = CFG3[1:0]
* RSV54_1 = CFG1[12:0]

Change-Id: Idc20d165d8117488010fcc8dfd946f7ad475da58
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

To deal with upcoming EMC periodic compensation, increase the BPMP timeout
to 2ms.

Change-Id: I8572c031168defd15504d905c4d625f44dd7fa3d
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>

This patch adds an assert in case the dynamic memmap routine fails.

Change-Id: Idd20debbb8944340f5928c6f2cfea973a63a7b1c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>