GitLab

Tegra186: Support AARCH32/64 encoding for MCE calls

PSCI: Build option to enable D-Caches early in warmboot

ARM platforms: Add option to use xlat tables lib v1

Add `ENABLE_ASSERTIONS` build option

Many asserts depend on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.

Change-Id: I6406674788aa7e1ad7c23d86ce94482ad3c382bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.

All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.

ASM_ASSERTION has been removed from the user guide.

Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Tegra: smmu: fix the size used to save context

This patch fixes the size used to save the context, when the
device enters System Suspend.

Reported by: David Cunado
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Add the new build option `ENABLE_ASSERTIONS` that controls whether or
not assert functions are compiled out. It defaults to 1 for debug builds
and to 0 for release builds.

Additionally, a following patch will be done to allow this build option
to hide auxiliary code used for the checks done in an `assert()`. This
code is is currently under the DEBUG build flag.

Assert messages are now only printed if LOG_LEVEL >= LOG_LEVEL_INFO,
which is the default for debug builds.

This patch also updates the User Guide.

Change-Id: I1401530b56bab25561bb0f274529f1d12c5263bc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch introduces a build option to enable D-cache early on the CPU
after warm boot. This is applicable for platforms which do not require
interconnect programming to enable cache coherency (eg: single cluster
platforms). If this option is enabled, then warm boot path enables
D-caches immediately after enabling MMU.

Fixes ARM-Software/tf-issues#456

Change-Id: I44c8787d116d7217837ced3bcf0b1d3441c8d80e
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

ARM platforms have migrated to the translation tables library v2.
However, for testing purposes, it can be useful to temporarily switch
back to the old version.

This patch introduces the option `ARM_XLAT_TABLES_LIB_V1`, that switches
to v1 of the library when is set to 1. By default, it is 0, so that ARM
platforms use the new version unless specifically stated.

Updated User Guide.

Change-Id: I53d3c8dd97706f6af9c6fca0364a88ef341efd31
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

C files shouldn't be included into others. This file only contains some
macros and functions that can be made `static inline`, so it is ok to
convert it into a header file.

This is the only occurrence of a C file being included in another one in
the codebase instead of using a header, other occurrences are a way of
achieving backwards-compatibility.

Functions therein have been qualified as `inline`.

Change-Id: I88fe300f6d85a7f0740ef14c9cb8fa54849218e6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

On Tegra systems, there are multiple software components that
require to interact with MCE. The components can either be 32-bit
or 64-bit payloads. This patch supports MCE SMC functions ID for
AARCH32 and AARCH64 architectures to support such clients.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Replace tf_printf occurrences with ERROR

Tegra186 platform support v6

Build: add generic way to include SCP_BL2 into FIP image

Tegra: memctrl_v1: enable 'xlat_table_v2' library

Not having U or ULL as a suffix for these enums causes
a lot of unnecessary MISRA issues. This patch adds U or
ULL suffix to these common enums to reduce number of
MISRA issues.
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch stops initialising the same UART console, as a "crash"
console. The normal and the crash consoles use the same UART port
and hence the crash console init function now only checks if the
console is ready to be used.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for fake system suspend (SC7).
This is a debug mode, to ensure that a different code path is
executed for cases like pre-silicon development, where a
full-fledged SC7 is not possible in early stages.

This particular patch ensures that, if fake system suspend is
enabled (denoted by tegra_fake_system_suspend variable
having a non-zero value), instead of calling WFI, a request
for a warm reset is made for starting the SC7 exit procedure.

This ensures that the code path of kernel->ATF and back to
kernel is executed without depending on other components
involved in SC7 code path.

Additionally, this patch also adds support for SMC call
from kernel, enabling fake system suspend mode.
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch restores the MC_TXN_OVERRIDE settings when we exit from
System Suspend.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

During boot, USB3 and flash media (SDMMC/SATA) devices need access to
IRAM. Because these clients connect to the MC and do not have a direct
path to the IRAM, the MC implements AHB redirection during boot to allow
path to IRAM. In this mode, accesses to a programmed memory address aperture
are directed to the AHB bus, allowing access to the IRAM. The AHB aperture
is defined by the IRAM_BASE_LO and IRAM_BASE_HI registers, which are
initialized to disable this aperture. Once bootup is complete, we must
program IRAM base/top, thus disabling access to IRAM.

This patch provides functionality to disable this access. The tegra port
calls this new function before jumping to the non-secure world during
cold boot.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to read the chip id and identify if
the current platform is Tegra186.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs MC transaction overrides settings using
mc_txn_override_cfgs array for all Tegra chips beyond Tegra186
rev. A01
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

GCC version 4.8 (and presumably earlier) warn when non-standard types are
used for bitfield definitions when -pedantic is enabled. This prevents TF
from being built with such toolchains, since -Werror -pedantic options are
used.

gcc-4.9 removed this warning; -pedantic is intended to cause gcc to emit a
warning in all cases required by the standard, but the standard does not
require a warning in this case.

See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57773

Signed-off-by: Stephen Warren <swarren@nvidia.com>

This patch adds flexibility to the code to initialise multiple SMMU
devices. The base address macro name has been changed to make it
explicit that we support multiple SMMUs.

Change-Id: Id4854fb010ebeb699512d79c769de24050c2ad69
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch empowers the platforms to provide an array with the
registers that must be saved/restored across System Suspend.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 platform support v5

zynqmp: Enable workaround for errata 855873

Implement console_flush()

This patch enables the 'xlat_table_v2' library for the Tegra Memory
Controller driver. This library allows us to dynamically map/unmap
memory regions, with MMU enabled.

The Memory Controller driver maps/unmaps non-overlapping Video Memory
region, to clean it of any secure contents, before it resizes the
region.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch makes the default implementation of plat_core_pos_by_mpidr()
as weakly linked, so that platforms can override it with their own.

Tegra186, for one, does not have CPU IDs 2 and 3, so it has its own
implementation of plat_core_pos_by_mpidr().

Change-Id: I7a5319869c01ede3775386cb95af1431792f74b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch empowers the platforms to provide the settings (e.g. stream ID,
security setting, transaction overrides) required by the Memory Controller
driver. This allows the platforms to program the Memory Controller as per
their needs and makes the driver scalable.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the memory controller configuration setting, which
allowed non-secure access to the TZSRAM memory.

Change-Id: Ic13645ba6a7694f192565962df40ca4fb8130f23
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This ARI call enables the EDBGREQ feature in the CCPLEX,
which will cause the CPUs to enter debug state instead of
vectoring to sw (ie MCA handler) upon receiving an async
abort signal.

Change-Id: Ifcb0e11446b6ac55179e3350d8f02b60ba32c94d
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the ARI header file to v3.1.

Change-Id: I3e58cf50d27fb6e72062bb9d9782b75296b32025
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.

Change-Id: Ib67eda64b09f26fb2f427f0d624f057081473132
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a config to the memory controller driver to enable SMMU
device init during boot. Tegra186 platforms keeps it enabled by default,
but future platforms might not support it.

Change-Id: Iebe1c60a25fc1cfb4c97a507e121d6685a49cb83
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new SMC function ID to read the refclk and coreclk
clock counter values from the Activity Monitor. The non-secure world
requires this information to calculate the CPU's frequency.

Formula: "freq = (delta_coreclk / delta_refclk) * refclk_freq"

The following CPU registers have to be set by the non-secure driver
before issuing the SMC:

X1 = MPIDR of the target core
X2 = MIDR of the target core

Change-Id: I296d835def1f5788c17640c0c456b8f8f0e90824
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new config to enable MC settings for the AFIW
and AFIR devices. Platforms must enable this config on their own.

Change-Id: I53b450117e4764ea76d9347ee2928f9be178b107
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>