GitLab

The Mediatek 8173 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.

Enable the workaround that TF provides to fix this erratum.

Change-Id: I6e1c7822c320d81bdd46b8942d1d755883dac1f5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

ARM erratum 855873 applies to all Cortex-A53 CPUs.
The recommended workaround is to promote "data cache clean"
instructions to "data cache clean and invalidate" instructions.
For core revisions of r0p3 and later this can be done by setting a bit
in the CPUACTLR_EL1 register, so that hardware takes care of the promotion.
As CPUACTLR_EL1 is both IMPLEMENTATION DEFINED and can be trapped to EL3,
we set the bit in firmware.
Also we dump this register upon crashing to provide more debug
information.

Enable the workaround for the Juno boards.

Change-Id: I3840114291958a406574ab6c49b01a9d9847fec8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Modify ARM common makefile to use version 2 of the translation tables
library and include the new header in C files.

Simplify header dependencies related to this library to simplify the
change.

The following table contains information about the size increase in
bytes for BL1 after applying this patch. The code has been compiled for
different configurations of FVP in AArch64 mode with compiler GCC 4.9.3
20150413. The sizes have been calculated with the output of `nm` by
adding the size of all regions and comparing the total size before and
after the change. They are sumarized in the table below:

                               text   bss   data  total
        Release                +660   -20    +88   +728
        Debug                  +740   -20   +242   +962
        Debug (LOG_LEVEL=50)  +1120   -20   +317  +1417

Change-Id: I539e307f158ab71e3a8b771640001fc1bf431b29
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

TLBI instructions for EL3 won't have the desired effect under specific
circumstances in Cortex-A57 r0p0. The workaround is to execute DSB and
TLBI twice each time.

Even though this errata is only needed in r0p0, the current errata
framework is not prepared to apply run-time workarounds. The current one
is always applied if compiled in, regardless of the CPU or its revision.

This errata has been enabled for Juno.

The `DSB` instruction used when initializing the translation tables has
been changed to `DSB ISH` as an optimization and to be consistent with
the barriers used for the workaround.

Change-Id: Ifc1d70b79cb5e0d87e90d88d376a59385667d338
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The files affected by this patch don't really depend on `xlat_tables.h`.
By changing the included file it becomes easier to switch between the
two versions of the translation tables library.

Change-Id: Idae9171c490e0865cb55883b19eaf942457c4ccc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch enables the following erratas for the Tegra210 SoC:

* Cortex-A57
=============
- A57_DISABLE_NON_TEMPORAL_HINT
- ERRATA_A57_826974
- ERRATA_A57_826977
- ERRATA_A57_828024
- ERRATA_A57_829520
- ERRATA_A57_833471

* Cortex-A53
=============
- A53_DISABLE_NON_TEMPORAL_HINT
- ERRATA_A53_826319
- ERRATA_A53_836870

Tegra210 uses Cortex-A57 revision: r1p1 and Cortex-A53 revision: r0p2.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the SEPARATE_CODE_AND_RODATA build flag for all
Tegra platforms, to allow setting proper MMU attributes for the RO
data and the code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Change-Id: I6d39b4cac9b34b1f841e9bbddaf9c49785ba0c5e
Signed-off-by: tony.xie <tony.xie@rock-chips.com>

The linux kernel v3.10 does not use System Suspend function ID, whereas
v4.4 uses it. This means affinity levels 0/1 will have different state id
values during System Suspend entry. This patch updates the assert criteria
to check both the state id values.

Change-Id: I07fcaf99501cc9622e40d0a2c1eb4a4a160be10a
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch allows the NS world to pass 64-bit base address for
the Video Memory carveout region.

Change-Id: I7e47cc1f5425bd39c6763755b801517013e1e0cd
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch increases the ADDR_SPACE_SIZE macro (virtual address)
to 35 bits, to support max memory of 32G, for all Tegra platforms.

Change-Id: I8e6861601d3a667d7428988c7596b0adebfa0548
Signed-off-by: Steven kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Some platforms might want to keep the uart console disabled
during boot. This patch checks if the platform supports a
console, before calling console_init().

Change-Id: Icc9c59cb979d91fd0a72e4732403b3284bdd2dfc
Signed-off-by: Damon Duan <danield@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies the TZDRAM base address to the new aperture
allocated by the bootloader.

Change-Id: Id158d15b1ec9aa681136d258e90fbba930aebf92
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sets the core power state during cluster power down,
so that the 'get_target_pwr_state' handler can calculate the
proper states for all the affinity levels.

Change-Id: If4adb001011208916427ee1623c6c923bed99985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the 'tegra_soc_get_target_pwr_state' handler used to
calculate the proper state for each of the affinity levels.

Change-Id: Id16bd15b96f0fc633ffeac2d7a390592fbd0454b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses GICD_BASE to calculate the GICD_ISPENDR regsiter address
in the platform's 'plat_crash_print_regs' routine.

Reported by: Seth Eatinger <seatinger@nvidia.com>

Change-Id: Ic7be29abc781f475ad25b59582ae60a0a2497377
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the console_init() from runtime_setup() as we already
initialize it earlier and disables/enables it across "System Suspend".

Change-Id: I992d3ca56ff4797faf83e8d7fa52c0ef3e1c3367
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to identify the underlying platform
on which we are running. The currently supported platforms
are actual silicon and simulation platforms.

Change-Id: Iadf96e79ec663b3dbd1a18e9bb95ffcdb82fc8af
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch makes the default MP definitions of plat_get_my_stack()
and plat_set_my_stack() as weak so that they can be overridden by
the AArch32 Secure Payload if it requires.

Change-Id: I3b6ddff5750443a776505e3023ff2934227592b6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Remove struct rockchip_pm_ops_cb and instead of using weak functions
implement; in this way we want the codes look clear and simple;

Change-Id: Ib9e8a5e932fdfc2b3e6a1ec502c40dfe720ac400
Signed-off-by: tony.xie <tony.xie@rock-chips.com>

This patch implements a per-soc handler to calculate the target
power state for the cluster/system. A weak implementation of the
handler is provided for platforms to use by default.

For SoCs with multiple CPU clusters, this handler would provide
the individual cluster/system state, allowing the PSCI service to
flush caches during cluster/system power down.

Change-Id: I568cdb42204f9841a8430bd9105bd694f71cf91d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to relocate the BL32 image from the NS
memory to TZDRAM during cold boot. The NS memory buffer is
cleared out after the process completes.

Change-Id: I1a033ffe73b8c309449f874d5187708d0a8846d2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.

Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch returns pointer to the BL32 entrypoint info only if
it is valid.

Change-Id: I71ce3c4626681753c94f3a7bbaa50c26c74874cb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch configures the TZDRAM fence during early platform
setup to allow the memory controller to enable DRAM encryption
before the TZDRAM actually gets used.

Change-Id: I0169ef9dda75699527b4e30c9e617a9036ba1d76
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch restores the TZRAM fence and the access permissions
on exiting the "System Suspend" state.

Change-Id: Ie313fca5a861c73f80df9639b01115780fb6e217
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables L2 ECC and Parity Protection for ARM Cortex-A57 CPUs
for Tegra SoCs.

Change-Id: I038fcd529991d0201a4951ce2730ab71b1c980f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.

Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.

The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.

Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.

This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.

Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a platform handler to calculate the proper target power
level at the specified affinity level.

Tegra platforms assign a local state value in order of decreasing depth
of the power state i.e. for two power states X & Y, if X < Y then X
represents a shallower power state than Y. As a result, the coordinated
target local power state for a power domain will be the maximum of the
requested local power state values.

Change-Id: I67360684b7f5b783fcfdd605b96da5375fa05417
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch includes platform_def.h required to access UART macros -
"TEGRA_BOOT_UART_CLK_IN_HZ" and "TEGRA_CONSOLE_BAUDRATE" from
tegra_helpers.S.

Change-Id: Ieb63968a48dc299d03e81ddeb1ccc871cf3397a1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the restriction of allowing SiP calls only from the
non-secure world. The secure world can issue SiP calls as a result of
this patch now.

Change-Id: Idd64e893ae8e114bba0196872d3ec544cac150bf
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a weak handler for early platform setup which
can be overriden by the soc-specific handlers to perform any
early setup tasks.

Change-Id: I1a7a98d59b2332a3030c6dca5a9b7be977177326
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to relocate BL3-1 code to BL31_BASE in case
we cold boot to a different address. This is particularly useful to
maintain compatibility with legacy BL2 code.

This patch also checks to see if the image base address matches either
the TZDRAM or TZSRAM base.

Change-Id: I72c96d7f89076701a6ac2537d4c06565c54dab9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This change disables the cache non-temporal hints for A57 and
A53 CPUs on Tegra.

Change-Id: I279d95aec5afbc3ca3cc4b34aa16de3f2c83a4fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Sorry to miss the security configuration for SRAM, if we don't support
it, somebody may modify the comment of SRAM in the non-secure space.
Let's fix this issue.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

This fixes code that set a tFC value in a register using the tRFC
value instead.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The F1 CAS latency setting was not bit shifted, which resulted in
setting the DRAM additive latency value instead.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

On resume, we use the DFS hardware to switch frequency index,
followed by a full training sequence on that index. Leaving
the DFS training modules enabled causes issues with the full
training done at resume. We also only needs these enabled
during a call to ddr_set_rate during runtime, so there's no
issue disabling them at the end of ddr_set_rate.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>