Skip to content

GitLab

Switch branch/tag
  1. 20 Nov, 2020 1 commit
  3. 19 Nov, 2020 4 commits
    • Manish V Badarkhe's avatar
      plat/nvidia: tegra: Rename SMC API · 840fa94a
      Manish V Badarkhe authored 
      

Renamed SMC API from "plat_smccc_feature_available" to
"plat_is_smccc_feature_available" as per the current implementation.
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib0fa400816fba61039c2029a9e127501a6a36811
      840fa94a
    • Saurabh Gorecha's avatar
      plat:qti Mandate SMC implementaion · 7a0f795e
      Saurabh Gorecha authored 
      

renamed smcc api with correct name  plat_is_smccc_feature_available

Change-Id: I277ece02bffc2caa065256576c1a047dfcde1c92
Signed-off-by: default avatarSaurabh Gorecha <sgorecha@codeaurora.org>
      7a0f795e
    • Pali Rohár's avatar
      plat: marvell: armada: Add new target mrvl_bootimage · 91bc2da7
      Pali Rohár authored 
      

This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.

Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.

To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.

For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280
      91bc2da7
    • Pali Rohár's avatar
      plat: marvell: armada: a3k: Add support for building $(DOIMAGETOOL) · c6a7ab77
      Pali Rohár authored 
      Current binary wtptp/linux/tbb_linux which is specified in $(DOIMAGETOOL)
variable points to external pre-compiled Marvell x86_64 ELF linux binary
from A3700-utils-marvell WTP repository.

It means that currently it is not possible to compile TF-A for A3720 on
other host platform then linux x86_64.

Part of the A3700-utils-marvell WTP repository is also source code of
$(DOIMAGETOOL) TBB_Linux tool.

This change adds support for building $(DOIMAGETOOL) also for a3k platform.

After running $(MAKE) at appropriate subdirectory of A3700-utils-marvell
WTP repository, compiled TBB_linux tool will appear in WTP subdirectory
wtptp/src/TBB_Linux/release/. So update also $(DOIMAGETOOL) variable to
point to the correct location where TBB_linux was built.

To build TBB_linux it is required to compile external Crypto++ library
which is available at: https://github.com/weidai11/cryptopp.git



User needs to set CRYPTOPP_PATH option to specify path to that library.

After this change it is now possible to build whole firmware for A3720
platform without requirement to use pre-compiled/proprietary x86_64
executable binaries from Marvell.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I6f26bd4356778a2f8f730a223067a2e550e6c8e0
      c6a7ab77
  5. 12 Nov, 2020 3 commits
  7. 28 Oct, 2020 4 commits
    • David Horstmann's avatar
      Use constant stack size with RECLAIM_INIT_CODE · 3ed5606b
      David Horstmann authored 
      

Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.

This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.

Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.

Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.

Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.

Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      3ed5606b
    • Dehui Sun's avatar
      mediatek: mt8192: add timer support · 4a128018
      Dehui Sun authored 
      

add timer driver.
Signed-off-by: default avatarDehui Sun <dehui.sun@mediatek.com>
Change-Id: I07448d85a15bb14577b05e4f302860d609420ba7
      4a128018
    • Nina Wu's avatar
      mediatek: mt8192: Add reboot function for PSCI · 0f408247
      Nina Wu authored 
      

Add system_reset function in psci ops

Change-Id: If85be70b8ae9d6487e02626356f0ff1e78b76de9
Signed-off-by: default avatarNina Wu <nina-cm.wu@mediatek.com>
      0f408247
    • gtk_pangao's avatar
      mediatek: mt8192: add sys_cirq driver · b6cec337
      gtk_pangao authored 
      

1.add sys_cirq driver
2.add gic api for cirq

Change-Id: Ie6802d6ddcf7dde3412a050736dfdc85f97cb51b
Signed-off-by: default avatargtk_pangao <gtk_pangao@mediatek.com>
      b6cec337
  9. 27 Oct, 2020 9 commits
  11. 26 Oct, 2020 1 commit
  13. 24 Oct, 2020 6 commits
  15. 21 Oct, 2020 4 commits
  17. 20 Oct, 2020 5 commits
  19. 19 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Fix including plat/marvell/marvell.mk file · 0412b732
      Pali Rohár authored 
      

Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
second time from common file plat/marvell/armada/common/marvell_common.mk.

It caused following warning every time was make called:

    plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
    plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'

Change in this commit removes inclusion of plat/marvell/marvell.mk file in
common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
needs this include file, add it also into a80x0 platform specific include
file lat/marvell/armada/a8k/common/a8k_common.mk.

Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
are already defined, but it defines MARVELL_SECURE_BOOT variable which is
needed by plat/marvell/armada/a3k/common/a3700_common.mk.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa
      0412b732
  21. 16 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Fix dependences for target fip · fb28d525
      Pali Rohár authored 
      

For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
therefore it does not depend on Marvell wtmi and wtp A3700-utils.

So remove mrvl_flash dependency for fip target to allow building fip image
without need to build mrvl_flash and therefore specify and provide Marvell
wmi and wtp A3700-utils.

This changes fixes compilation of fip image for A3700 platform by command:

    make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
         DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip

Marvell boot image can be still build by 'mrvl_flash' target.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9
      fb28d525
  23. 15 Oct, 2020 1 commit