GitLab

This patch factors out the ARM FVP specific code to create MMU
translation tables so that it is possible for a boot loader stage to
create a different set of tables instead of using the default ones.
The default translation tables are created with the assumption that
the calling boot loader stage executes out of secure SRAM. This might
not be true for the BL3_2 stage in the future.

A boot loader stage can define the `fill_xlation_tables()` function as
per its requirements. It returns a reference to the level 1
translation table which is used by the common platform code to setup
the TTBR_EL3.

This patch is a temporary solution before a larger rework of
translation table creation logic is introduced.

Change-Id: I09a075d5da16822ee32a411a9dbe284718fb4ff6

This patch adds the following support to the BL3-1 stage:

1. BL3-1 allows runtime services to specify and determine the security
   state of the next image after BL3-1. This has been done by adding
   the `bl31_set_next_image_type()` & `bl31_get_next_image_type()`
   apis. The default security state is non-secure. The platform api
   `bl31_get_next_image_info()` has been modified to let the platform
   decide which is the next image in the desired security state.

2. BL3-1 exports the `bl31_prepare_next_image_entry()` function to
   program entry into the target security state. It uses the apis
   introduced in 1. to do so.

3. BL3-1 reads the information populated by BL2 about the BL3-2 image
   into its internal data structures.

4. BL3-1 introduces a weakly defined reference `bl32_init()` to allow
   initialisation of a BL3-2 image. A runtime service like the Secure
   payload dispatcher will define this function if present.

Change-Id: Icc46dcdb9e475ce6575dd3f9a5dc7a48a83d21d1

This patch reworks BL2 to BL3-1 hand over interface by introducing a
composite structure (bl31_args) that holds the superset of information
that needs to be passed from BL2 to BL3-1.

  - The extents of secure memory available to BL3-1
  - The extents of memory available to BL3-2 (not yet implemented) and
    BL3-3
  - Information to execute BL3-2 (not yet implemented) and BL3-3 images

This patch also introduces a new platform API (bl2_get_bl31_args_ptr)
that needs to be implemented by the platform code to export reference to
bl31_args structure which has been allocated in platform-defined memory.

The platform will initialize the extents of memory available to BL3-3
during early platform setup in bl31_args structure. This obviates the
need for bl2_get_ns_mem_layout platform API.

BL2 calls the bl2_get_bl31_args_ptr function to get a reference to
bl31_args structure. It uses the 'bl33_meminfo' field of this structure
to load the BL3-3 image. It sets the entry point information for the
BL3-3 image in the 'bl33_image_info' field of this structure. The
reference to this structure is passed to the BL3-1 image.

Also fixes issue ARM-software/tf-issues#25

Change-Id: Ic36426196dd5ebf89e60ff42643bed01b3500517

This patch adds guards so that an exception vector exceeding 32
instructions will generate a compile-time error. This keeps the
exception handlers in check from spilling over.

Change-Id: I7aa56dd0071a333664e2814c656d3896032046fe

This patch uses the reworked exception handling support to handle
runtime service requests through SMCs following the SMC calling
convention. This is a giant commit since all the changes are
inter-related. It does the following:

1. Replace the old exception handling mechanism with the new one
2. Enforce that SP_EL0 is used C runtime stacks.
3. Ensures that the cold and warm boot paths use the 'cpu_context'
   structure to program an ERET into the next lower EL.
4. Ensures that SP_EL3 always points to the next 'cpu_context'
   structure prior to an ERET into the next lower EL
5. Introduces a PSCI SMC handler which completes the use of PSCI as a
   runtime service

Change-Id: I661797f834c0803d2c674d20f504df1b04c2b852
Co-authored-by: Achin Gupta <achin.gupta@arm.com>

This patch introduces the reworked exception handling logic which lays
the foundation for accessing runtime services in later patches. The
type of an exception has a greater say in the way it is
handled. SP_EL3 is used as the stack pointer for:

1. Determining the type of exception and handling the unexpected ones
   on the exception stack

2. Saving and restoring the essential general purpose and system
   register state after exception entry and prior to exception exit.

SP_EL0 is used as the stack pointer for handling runtime service
requests e.g. SMCs. A new structure for preserving general purpose
register state has been added to the 'cpu_context' structure. All
assembler ensures that it does not use callee saved registers
(x19-x29). The C runtime preserves them across functions calls. Hence
EL3 code does not have to save and restore them explicitly.

Since the exception handling framework has undergone substantial change,
the changes have been kept in separate files to aid readability. These
files will replace the existing ones in subsequent patches.

Change-Id: Ice418686592990ff7a4260771e8d6676e6c8c5ef

This patch introduces the framework to enable registration and
initialisation of runtime services. PSCI is registered and initialised
as a runtime service. Handling of runtime service requests will be
implemented in subsequent patches.

Change-Id: Id21e7ddc5a33d42b7d6e455b41155fc5441a9547

This patch uses the context library to save and restore EL3 state on
the 'cpu_context' data structures allocated by PSCI for managing
non-secure state context on each cpu.

Change-Id: I19c1f26578204a7cd9e0a6c582ced0d97ee4cf80

This patch adds support for a cpu context management library. This
library will be used to:

1. Share pointers to secure and non-secure state cpu contexts between
   runtime services e.g. PSCI and Secure Payload Dispatcher services
2. Set SP_EL3 to a context structure which will be used for
   programming an ERET into a lower EL
3. Provide wrapper functions to save and restore EL3 & EL1
   state. These functions will in turn use the helper functions in
   context.S

Change-Id: I655eeef83dcd2a0c6f2eb2ac23efab866ac83ca0

This patch introduces functions for saving and restoring shared system
registers between secure and non-secure EL1 exception levels, VFP
registers and essential EL3 system register and other state. It also
defines the 'cpu_context' data structure which will used for saving and
restoring execution context for a given security state. These functions
will allow runtime services like PSCI and Secure payload dispatcher to
implement logic for switching between the secure and non-secure states.

The save and restore functions follow AArch64 PCS and only use
caller-saved temporary registers.

Change-Id: I8ee3aaa061d3caaedb28ae2c5becb9a206b6fd74

This patch ensures that VBAR_EL3 points to the simple stack-less
'early_exceptions' when the C runtime stack is not correctly setup to
use the more complex 'runtime_exceptions'. It is initialised to
'runtime_exceptions' once this is done.

This patch also moves all exception vectors into a '.vectors' section
and modifies linker scripts to place all such sections together. This
will minimize space wastage from alignment restrictions.

Change-Id: I8c3e596ea3412c8bd582af9e8d622bb1cb2e049d

The Firmware Image Package (FIP) driver allows for data to be loaded
from a FIP on platform storage. The FVP supports loading bootloader
images from a FIP located in NOR FLASH.

The implemented FVP policy states that bootloader images will be
loaded from a FIP in NOR FLASH if available and fall back to loading
individual images from semi-hosting.

NOTE:
- BL3-3(e.g. UEFI) is loaded into DRAM and needs to be configured
  to run from the BL33_BASE address. This is currently set to
  DRAM_BASE+128MB for the FVP.

Change-Id: I2e4821748e3376b5f9e467cf3ec09509e43579a0

This tool can be used to create a Firmware Image Packages (FIP). These
FIPs store a combined set of firmware images with a Table of Contents
(ToC) that can be loaded by the firmware from platform storage.

- Add uuid.h from FreeBSD.
- Use symbolic links to shared headers otherwise unwanted headers and
  definitions are pulled in.
- A FIP is created as part of the default FVP build.
- A BL3-3 image(e.g. UEFI) must be provided.

Change-Id: Ib73feee181df2dba68bf6abec115a83cfa5e26cb

The modified implementation uses the IO abstraction rather than
making direct semi-hosting calls.  The semi-hosting driver is now
registered for the FVP platform during initialisation of each boot
stage where it is used.  Additionally, the FVP platform includes a
straightforward implementation of 'plat_get_image_source' which
provides a generic means for the 'load_image' function to determine
how to access the image data.

Change-Id: Ia34457b471dbee990c7b3c79de7aee4ceea51aa6

This is intended primarily for use as a storage abstraction.
It allows operations such as image-loading to be implemented
in a platform-independent fashion.  Each platform registers
a set of IO drivers during initialisation.  The platform must
also provide a function that will return a device and a specifier
that can be used to access specified content.

Clients of the API will primarily use device and entity handles.
The term "entity" is deliberately vague, to allow for different
representations of content accessed using different types of
specifier, but will often be interpreted as a "file" where the
specifier will normally be its path.

This commit builds, but is intended to be paired with a sample
implementation of "load_image" using a semi-hosting driver on FVP.

Change-Id: Id3b52f1c0eb9ce76b44b99fc6b6460803668cc86

The psci implementation does not track target affinity level requests
specified during cpu_suspend calls correctly as per the following
example.

1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0
2. Only the cpu0.cluster0 is powered down while cluster0 remains
   powered up
3. cpu1.cluster0 calls cpu_off to power itself down to highest
   possible affinity level
4. cluster0 will be powered off even though cpu0.cluster0 does not
   allow cluster shutdown

This patch introduces reference counts at affinity levels > 0 to track
the number of cpus which want an affinity instance at level X to
remain powered up. This instance can be turned off only if its
reference count is 0. Cpus still undergo the normal state transitions
(ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be
either ON or OFF depending upon their reference count.

The above issue is thus fixed as follows:

1. cluster0's reference count is incremented by two when cpu0 and cpu1
   are initially powered on.

2. cpu0.cluster0 calls cpu_suspend with the target affinity level as
   0. This does not affect the cluster0 reference count.

3. Only the cpu0.cluster0 is powered down while cluster0 remains
   powered up as it has a non-zero reference count.

4. cpu1.cluster0 call cpu_off to power itself down to highest possible
   affinity level. This decrements the cluster0 reference count.

5. cluster0 is still not powered off since its reference count will at
   least be 1 due to the restriction placed by cpu0.

Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9

The secure context saved and restored across a cpu_suspend operation
can be more than just the state of the secure system registers e.g. we
also need to save the affinity level till which the cpu is being
powered down. This patch creates a suspend_context data structure
which includes the system register context. This will allow other bits
to be saved and restored as well in subsequent patches.

Change-Id: I1c1f7d25497388b54b7d6ee4fab77e8c6a9992c4

The GICv3 distributor can have more ports than CPUs are available in
the system. Probe all re-distributors and use the matching affinity
levels as specified by each core and re-distributor to decide which
re-distributor to use with which CPU core.

If a core cannot be matched with a re-distributor, the core panics and
is placed in an endless loop.

Change-Id: Ie393cfe07c7449a2383959e3c968664882e18afc

Traps when accessing architectural features are disabled by clearing bits
in CPTR_EL3 during early boot, including accesses to floating point
registers. The value of this register was previously undetermined, causing
unwanted traps to EL3. Future EL3 code (for example, context save/restore
code) may use floating point registers, although they are not used by current
code.

Also, the '-mgeneral-regs-only' flag is enabled in the GCC settings to
prevent generation of code that uses floating point registers.

Change-Id: I9a03675f6387bbbee81a6f2c9ccf81150db03747

Change-Id: Ic7fb61aabae1d515b9e6baf3dd003807ff42da60

GIC setup code which used to be in bl31_plat_setup.c is now in fvp_gic.c
to simplify future changes to other bootloader stages.  This patch moves
code from bl31_plat_setup.c to fvp_gic.c, simplifies the include file
list for bl31_plat_setup.c, moves GIC declarations from the bl31.h header
file into the platform.h, and reworks files according to coding style
guide.

Change-Id: I48d82a4ba33e7114dcc88f9ca98767a06cf8f417

Tighten up ISO C standard checking. Fix 'CASSERT' implementation to
conform to C99 as opposed to GNU99 standard.

Change-Id: I58ddc61913617b66f11da5b6e3f7363136d5cf7d

SPSR is a 32-bit register and so its size should be reflected in
the gp_regs structure.  This patch fixes the type of gp_regs.spsr
to use a 32-bit variable.  It also makes the size of the other
register fields more explicit.

Change-Id: I27e0367df1a91cc501d5217c1b3856d4097c60ba

Change-Id: I3659e119a242f8ef828e32bfdf5d0b4b7ac4f716

- This change is split into two separate patches in order to
  simplify the history as interpreted by 'git'. The split is
  between the move/rename and addition of new files.
- Remove dependency on toolchain C library headers and functions in
  order to ensure behavioural compatibility between toolchains.
- Use FreeBSD as reference for C library implementation.
- Do not let GCC use default library include paths.
- Remove unused definitions in modified headers and implementations.
- Move C library files to 'lib/stdlib' and 'include/stdlib'.
- Break std.c functions out into separate files.

Change-Id: I3e3d8d992052264d2a02489034ae4c03bf0f5512

- This change is split into two separate patches in order to
  simplify the history as interpreted by 'git'. The split is
  between the move/rename and addition of new files.
- Remove dependency on toolchain C library headers and functions in
  order to ensure behavioural compatibility between toolchains.
- Use FreeBSD as reference for C library implementation.
- Do not let GCC use default library include paths.
- Remove unused definitions in modified headers and implementations.
- Move C library files to 'lib/stdlib' and 'include/stdlib'.
- Break std.c functions out into separate files.

Change-Id: I91cddfb3229775f770ad781589670c57d347a154

- Add 'debug.h' with INFO, WARN and ERROR macros.
- This prints the specified message with the appropriate tag.
- INFO and WARN messages are only displayed when building with
  the DEBUG flag set. Error messages are always printed.

Change-Id: I21835b6063fcc99649b30ac7489387cbd3705bc0

ns_entry_info used to be a per-cpu array.  This is a waste of space
because it is only accessed by the primary CPU on the cold boot path.
This patch reduces ns_entry_info to a single-cpu area.

Change-Id: I647c70c4e76069560f1aaad37a1d5910f56fba4c

RUN_IMAGE constant is used by all bootloader stages.

Change-Id: I1b4e28d8fcf3ad1363f202c859f5efab0f320efe

Platform setup code has to reserve some memory for storing the
memory layout information.  It is populated in early platform setup
code.

blx_get_sec_mem_layout() functions used to return a copy of this
structure.  This patch modifies blx_get_sec_mem_layout() functions
so that they now directly return a pointer to their memory layout
structure.  It ensures that the memory layout returned by
blx_get_sec_mem_layout() is always up-to-date and also avoids a
useless copy of the meminfo structure.

Also rename blx_get_sec_mem_layout() to blx_plat_sec_mem_layout()
to make it clear those functions are platform specific.

Change-Id: Ic7a6f9d6b6236b14865ab48a9f5eff545ce56551

This patch:

1. removes a duplicate assertion to check that the only error
   condition that can be returned while turning a cpu off is
   PSCI_E_DENIED. Having this assertion after calling
   psci_afflvl_off() is sufficient.

2. corrects some incorrect usage of 'its' vs 'it is'

3. removes some unwanted white spaces

Change-Id: Icf014e269b54f5be5ce0b9fbe6b41258e4ebf403

This patch removes the duplicate declaration of psci_cpu_on in psci.h
and moves the constants for the system level implementation of the
generic timer from arch_helpers.h to arch.h. All other architectural
constants are defined in arch.h so there is no need to add them to
arch_helpers.h

Change-Id: Ia8ad3f91854f7e57fce31873773eede55c384ff1

This patch fixes the following constant values in the psci.h:

1. The affinity level shift value in the power_state parameter of the
   cpu_suspend psci call. The previous value was preventing shutdown
   of the affinity level 1.

2. The values used for affinity state constants (ON, OFF,
   ON_PENDING). They did not match the values expected to be returned
   by the affinity_info psci api as mentioned in the spec.

3. The state id shift value in the power_state parameter of the
   cpu_suspend psci call.

Change-Id: I62ed5eb0e9640b4aa97b93923d6630e6b877a097

The runtime exception handling assembler code used magic numbers for
saving and restoring the general purpose register context on stack
memory. The memory is interpreted as a 'gp_regs' structure and the
magic numbers are offsets to members of this structure. This patch
replaces the magic number offsets with constants. It also adds compile
time assertions to prevent an incorrect assembler view of this
structure.

Change-Id: Ibf125bfdd62ba3a33e58c5f1d71f8c229720781c

- Add instructions for contributing to ARM Trusted Firmware.

- Update copyright text in all files to acknowledge contributors.

Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5

  - Check at link-time that bootloader images will fit in memory
    at run time and that they won't overlap each other.
  - Remove text and rodata orphan sections.
  - Define new linker symbols to remove the need for platform setup
    code to know the order of sections.
  - Reduce the size of the raw binary images by cutting some sections
    out of the disk image and allocating them at load time, whenever
    possible.
  - Rework alignment constraints on sections.
  - Remove unused linker symbols.
  - Homogenize linker symbols names across all BLs.
  - Add some comments in the linker scripts.

Change-Id: I47a328af0ccc7c8ab47fcc0dc6e7dd26160610b9

Also, don't invalidate the TLBs in disable_mmu() function, it's better
to do it in enable_mmu() function just before actually enabling the
MMU.

Change-Id: Ib32d6660019b0b2c17254156aad4be67ab4970e1

Any asynchronous exception caused by the firmware should be handled
in the firmware itself.  For this reason, unmask SError exceptions
(and Debug ones as well) on all boot paths.  Also route external
abort and SError interrupts to EL3, otherwise they will target EL1.

Change-Id: I9c191d2d0dcfef85f265641c8460dfbb4d112092