Skip to content

GitLab

Switch branch/tag
  1. 27 Nov, 2018 3 commits
  3. 26 Nov, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Synchronise arch.h and arch_helpers.h with TF-A-Tests · 932b3ae2
      Antonio Nino Diaz authored 
      

The headers forked at some point in the past and have diverged a lot. In
order to make it easier to share code between TF-A-Tests and TF-A, this
patch synchronises most of the definitions in the mentioned headers.

This is not a complete sync, it has to be followed by more cleanup.

This patch also removes the read helpers for the AArch32 instructions
ats1cpr and ats1hr (they are write-only).

Change-Id: Id13ecd7aeb83bd2318cd47156d71a42f1c9f6ba2
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      932b3ae2
  5. 21 Nov, 2018 1 commit
  7. 20 Nov, 2018 1 commit
  9. 19 Nov, 2018 1 commit
    • Pete Batard's avatar
      rpi3: add RPI3_USE_UEFI_MAP build option · 4dcf1fad
      Pete Batard authored 
      

The default Raspberry Pi 3 memory mapping for ATF is geared towards
the use of uboot + Linux. This creates issues when trying to use
ATF with an UEFI payload and Windows on ARM64.

We therefore introduce new build option RPI3_USE_UEFI_MAP, that
enables the build process to use an alternate memory mapping that
is compatible with UEFI + Windows (as well as UEFI + Linux).

Fixes ARM-software/tf-issues#649
Signed-off-by: default avatarPete Batard <pete@akeo.ie>
      4dcf1fad
  11. 15 Nov, 2018 4 commits
  13. 14 Nov, 2018 5 commits
    • Andre Przywara's avatar
      allwinner: power: Add DCDC6 power rail · 793c38f0
      Andre Przywara authored 
      

The DCDC6 power rail is typically driving VDD_SYS in the SoC, so it is
on by default and uses the default voltage.

As there seems to be at least on board using a different voltage, add
the rail to the list of known voltage lines, so we can setup the right
voltage as early as possible.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      793c38f0
    • Andre Przywara's avatar
      allwinner: power: add enable switches for DCDC1/5 · a561e41b
      Andre Przywara authored 
      

The DCDC1 and DCDC5 power rails didn't specify the enable bits. This
isn't critical, since those rails are on by default (and are needed for
every board), but it is inconsistent.

Add the respective enable bits for those two rails.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      a561e41b
    • Andre Przywara's avatar
      allwinner: power: fix DRIVEVBUS pin setup · d93eb446
      Andre Przywara authored 
      

The DRIVEVBUS pin setup was broken in two ways:
- To configure this pin as an output pin, one has to *clear* the bit in
  register 0x8f. It is 0 by default, but rebooting from Linux might have
  left this bit set.
- Doing this just configures the pin as an output pin, but doesn't
  actually drive power to it. This is done via bit 2 in register 0x30.

Fix the routine to both properly configure the pin and drive power to
it. Add an axp_clrsetbits() helper on the way.

Now this isn't really perfect, still:
We only need to setup the PMIC power rails that are needed for U-Boot.
DRIVEVBUS typically controls the VBUS voltage for the host function of
an USB-OTG port, something we typically don't want in U-Boot (fastboot,
using the USB *device* functionality, is much more common). The
BananaPi-M64 uses the regulator in this way, but the Remix Mini PC
actually controls the power of both its USB ports via this line.

Technically we should differentiate here: if DRIVEVBUS controls a
microUSB-B socket, the power should stay off, any host-type A sockets
should be supplied, though.
For now just always enable the power, that shouldn't really hurt the
USB-OTG functionality anyway.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      d93eb446
    • Andre Przywara's avatar
      allwinner: A64/H5: setup missing bus clocks · 19a7507a
      Andre Przywara authored 
      

The legacy Allwinner ATF port used to setup some clocks, and U-Boot is
still relying on this. We don't need to setup the full set, as the SPL
is doing most of it, but it misses one clock (AHB2) and programs another
(AHB1) to quite conservative values.

Fix this up during the platform setup to improve USB and Ethernet
performance, iperf values go up by 31% in my setup with that patch.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      19a7507a
    • Sughosh Ganu's avatar
      SPM: Register Secure Partition priority level with ehf module · 5681b292
      Sughosh Ganu authored 
      

Register a priority level, PLAT_SP_PRI, for secure partition with EL3
exception handling framework(ehf) module.

The secure partition manager(SPM) would raise the core's priority to
PLAT_SP_PRI before entering the secure partition, to protect the core
from getting interrupted while in secure partition.

Change-Id: I686897f052a4371e0efa9b929c07d3ad77249e95
Signed-off-by: default avatarSughosh Ganu <sughosh.ganu@arm.com>
      5681b292
  15. 13 Nov, 2018 1 commit
    • Pete Batard's avatar
      rpi3: add RPI3_RUNTIME_UART build option · 6d5c61de
      Pete Batard authored 
      

Some OSes (e.g. Ubuntu 18.04 LTS on Raspberry Pi 3) may disable the
runtime UART in a manner that prevents the system from rebooting if
ATF tries to send runtime messages there.

Also, we don't want the firmware to share the UART with normal
world, as this can be a DoS attack vector into the secure world.

This patch fixes these 2 issues by introducing new build option
RPI3_RUNTIME_UART, that disables the runtime UART by default.

Fixes ARM-software/tf-issues#647
Signed-off-by: default avatarPete Batard <pete@akeo.ie>
      6d5c61de
  17. 09 Nov, 2018 2 commits
    • Yann Gautier's avatar
      stm32mp1: correct some static analysis tools issues · 3e6fab43
      Yann Gautier authored 
      

These issues wer found by sparse:

drivers/st/clk/stm32mp1_clk.c:1524:19:
 warning: incorrect type in assignment (different base types)
    expected restricted fdt32_t const [usertype] *pkcs_cell
    got unsigned int const [usertype] *

plat/st/stm32mp1/plat_image_load.c:13:6:
 warning: symbol 'plat_flush_next_bl_params' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:21:16:
 warning: symbol 'plat_get_bl_image_load_info' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:29:13:
 warning: symbol 'plat_get_next_bl_params' was not declared.
 Should it be static?

plat/st/stm32mp1/bl2_io_storage.c:40:10:
 warning: symbol 'block_buffer' was not declared. Should it be static?
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      3e6fab43
    • Siva Durga Prasad Paladugu's avatar
      arm64: versal: Add support for new Xilinx Versal ACAPs · f91c3cb1
      Siva Durga Prasad Paladugu authored 
      

Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar
Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with
leading-edge memory and interfacing technologies to deliver powerful
heterogeneous acceleration for any application. The Versal AI Core series has
five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm
Cortex-A72 application processors, dual-core Arm Cortex-R5 real-time
processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines
optimized for high-precision floating point with low latency.

This patch adds Virtual QEMU platform support for
this SoC "versal_virt".
Signed-off-by: default avatarSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      f91c3cb1
  19. 08 Nov, 2018 4 commits
  21. 06 Nov, 2018 3 commits
  23. 05 Nov, 2018 1 commit
  25. 01 Nov, 2018 4 commits
  27. 31 Oct, 2018 2 commits
  29. 30 Oct, 2018 5 commits
  31. 29 Oct, 2018 2 commits