GitLab

These directives are only used when stabs debugging information
is used, but we use ELF which uses DWARF debugging information.
Clang assembler doesn't support these directives, and removing
them makes the code more compatible with clang.

Change-Id: I2803f22ebd24c0fe248e04ef1b17de9cec5f89c4
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

The stdint header was introduced to rk3399's plat_sip_calls.c in order
to fix missing stdint definitions. However, ordering headers
alphabetically caused the fix to be ineffective, as stint was then
included after the offending header file (dfs.h).

Move the stdint include to that header to properly fix the issue.

Change-Id: Ieaad37a7932786971488ab58fc5b169bfa79e197
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

To catch early hangs in resume, this sets up the watchdog before
anything else in the pmusram code (ignoring setting up the stack...).
This uses hard coded settings for the watchdog until the proper
watchdog restore later on in the firmware/kernel.

This also restores the old watchdog register values before the PLLs
are restored to make sure we don't temporarily switch over to a 1/3s
timeout on the watchdog when the pclk_wdt goes from 4MHz to 100MHz.

Change-Id: I8f7652089a88783271b17482117b4609330abe80
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

All the m0 code run in SRAM before, but we need to watch PMU_POWER_ST
when SOC enter into FSM, and SRAM will shutdown during this time, so
this code need run in PMUSRAM. But PMUSRAM only 8K space, we can not
put all the m0 binary into PMUSRAM, Split the M0 binary into two, dram
part still run in SRAM, and suspend part run in PMUSRAM.

Change-Id: Ie08bdf3e2b8838f12b9297fe60ab0aad219684b1
Signed-off-by: Lin Huang <hl@rock-chips.com>

we need to enable PMU_WKUP_RST_EN for pmu powermode configure, since
enable wakeup reset will hold the soc status, so the SOC will not affect
by some power or other single glitch when resume, and keep the soc in the
right status. And it not need to enable DDRIO_RET_HW_DE_REQ, the ddr resume
will do it manual.

Change-Id: Ib4af897ffb3cb63dc2aa9a6002e5d9ef86ee4a49
Signed-off-by: Lin Huang <hl@rock-chips.com>

Commit 4c0d0390

 ("Rework type usage in Trusted Firmware") changed
the type usage in struct declarations, but did not touch the definition
side.  Fix the type mismatch.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This fixes an off by 576x bug the the sram_udelay code. The wrong
value was multipled by the system ticks per mhz value (which is 24),
so we delayed for 1/576th of the requested time.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>

When the source code says 'SMCC' it is talking about the SMC Calling
Convention. The correct acronym is SMCCC. This affects a few definitions
and file names.

Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S)
but the old files have been kept for compatibility, they include the
new ones with an ERROR_DEPRECATED guard.

Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

there are two fix for save/restore watchdog register:
1. watchdog plck will shutdown after secure_watchdog_disable(), so need
   to save register before it and restore after secure_watchdog_enable().
2. need write 0x76 to cnt_restart to keep watchdog alive when restore
   watchdog register.

Change-Id: I1f6fbceae22186e3b72a87df6332a110adf37479
Signed-off-by: Lin Huang <hl@rock-chips.com>

MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.

This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.

Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>

Coverity scan done for the coreboot project found the issue:
Coverity (*** CID 1385418: Memory - illegal accesses (OVERRUN))
Coverity (*** CID 1385419: Memory - corruptions  (OVERRUN))

Fix the Converity error issue with store_cru[] loop needs to be one
element bigger.

Fixes: ARM-software/tf-issues#544

Change-Id: I420f0a660b24baaa5fc5e78fca242cf750c9bbc7
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This adds calls to the GICv3 save/restore functions for the GIC
distributor and redistributor.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

We were looping for MAX_WAIT_COUNT in several places without any
delays, so this adds the delays to make those loops more predictable.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The code was accidentally restoring the QOS on suspend and saving the
QOS on resume. This is the opposite of what we want.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This brings ATF into line with the kernel on the timeout for power
domains turning on. We could actually timeout (when we shouldn't) on
resume when turning power domains on. The guaranteed maximum delay is
now 10ms.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This patch changes all Rockchip platforms to use the new
MULTI_CONSOLE_API. The platform-specific plat_crash_console
implementations are removed so that the platform can use the ones from
the common platform code instead.

Also change the registers used in plat_crash_print_regs. The existing
use of x16 and x17 has always been illegal, since those registers are
reserved for use by the linker as a temporary scratch registers in
intra-procedure-call veneers and can never be expected to maintain their
values across a function call.

Change-Id: I8249424150be8d5543ed4af93b56756795a5288f
Signed-off-by: Julius Werner <jwerner@chromium.org>

This patch changes all Rockchip platforms to initialize the serial
console with information supplied by coreboot rather than hardcoded
base address and divisor values if BL31 is run on top of coreboot.
Moving the BL2-to-BL31 parameter parsing as early as possible to ensure
that the console is available for all following code.

Also update the Rockchip platform to use MULTI_CONSOLE_API.

Change-Id: I670d350fa2f8b8133539f91ac14977ab47db60d9
Signed-off-by: Julius Werner <jwerner@chromium.org>

This includes the stdint header to declare the various types used within
the file, preventing build errors with recent GCC versions.

Change-Id: I9e7e92bb31deb58d4ff2732067dd88b53124bcc9
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.

This has a minor performance improvement with no functional
impact.

Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: David Cunado <david.cunado@arm.com>

When defining different sections in linker scripts it is needed to align
them to multiples of the page size. In most linker scripts this is done
by aligning to the hardcoded value 4096 instead of PAGE_SIZE.

This may be confusing when taking a look at all the codebase, as 4096
is used in some parts that aren't meant to be a multiple of the page
size.

Change-Id: I36c6f461c7782437a58d13d37ec8b822a1663ec1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Some platforms (for ex. UniPhier) want to create files in the very
top of the build directory.  Add ${BUILD_PLAT} so such files can
depend on it.

Make existing directory targets depend on ${BUILD_PLAT} because
they are sub-directories of ${BUILD_PLAT}.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

when shutdown logic power rail, the some sgrf register
value will reset, so need to reinitilize secure.

Change-Id: I8ad0570432e54441fe1c60dd2960a81fd58f7163
Signed-off-by: Lin Huang <hl@rock-chips.com>

we will use timer in pmusarm, when logic power rail shutdown,
the secure timer will gone, so need to initial it in pmusram.

Change-Id: I472e7eec3fc197f56223e6fff9167556c1c5e3bc
Signed-off-by: Lin Huang <hl@rock-chips.com>

we do not have enough pmusram space now, so use slice1 to restore
ddr slice1 ~ slice4, that's will save more pmusram space.

Change-Id: Id54a7944f33d01a8f244cee6a8a0707bfe4d42da
Signed-off-by: Lin Huang <hl@rock-chips.com>

Change-Id: Ia59adf48cf14eb627721264765bce50cb31065ef
Signed-off-by: Lin Huang <hl@rock-chips.com>

pd_alive control cru, grf, timer, gpio and wdt, when
turn off logic power rail, these register value will
back to reset value, we need to save them value in suspend
and restore them when resuem, since timer will reinitial
in kernel, so it not need to save/restore.

Change-Id: I0fc2a011d3cdc04b66ffbf728e769eb28b51ee38
Signed-off-by: Lin Huang <hl@rock-chips.com>

when logic power rail shutdown, CRU register will back to reset
value, ddr use abpll as clock source when do suspend, we need to save
and dpll value in pmusram, then set back these ddr clock back to dpll
when dddr resume.

Change-Id: I95dc0173649e8515859cfa46b40a606e0cc2fe3f
Signed-off-by: Lin Huang <hl@rock-chips.com>

when shutdown logic power rail, the uart register value will reset,
so need to reinitilize debug uart.

Change-Id: I48d3535c0068fd671dea6ea32e908612992faf62
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.

Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

Decrypt device private keys which transfer from kernel, then stuff it to
DP controller. So that DP driver could start HDCP authentication in
kernel.

Change-Id: If3c2cd99bca811fe5fc30acc88bf5dc1afd7416d
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This patch fixes the two things as follows:

1) rk3399_flash_l2_b" seems to be a typo. That's "flush", not "flash".

2) fixes the warnings log.
We always hit the warnings thing during the suspend, as below log:
..
[   51.022334] CPU5: shutdown
[   51.025069] psci: CPU5 killed.
INFO:    sdram_params->ddr_freq = 928000000
WARNING: rk3399_flash_l2_b:reg 28830380,wait

When the L2 completes the clean and invalidate sequence, it asserts the
L2FLUSHDONE signal. The SoC can now deassert L2FLUSHREQ signal and then
the L2 deasserts L2FLUSHDONE.

Then, a loop without a delay isn't really great to measure time. We should
probably add a udelay(10) or so in there and then maybe replace the WARN()
after the loop. In the actual tests, the L2 cache will take ~4ms by
default for big cluster.

In the real world that give 10ms for the enough margin, like the
ddr/cpu/cci frequency and other factors that will affect it.

Change-Id: I55788c897be232bf72e8c7b0e10cf9b06f7aa50d
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

For rk3399, the L2ACTLR[14] is 0 by default, as ACE CCI-500 doesn't
support WriteEvict. and you will hit the condition L2ACTLR[3] with 0,
as the Evict transactions should propagate to CCI-500 since it has
snoop filters.

Maybe this erratum applies to all Cortex-A53 cores so far, especially
if RK3399's A53 is a r0p4. we should enable it to avoid data corruption,

Change-Id: Ib86933f1fc84f8919c8e43dac41af60fd0c3ce2f
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

For some reason, HDCP key decrytion can't open source in ATF, so we
build it as hdcp.bin. Besides declare the handler for decrypting.

Change-Id: Ia67ff2442ab43cb3ee4875b3d59cc1608e854b4b
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

unlike rk3399 and rk3368, there are some rockchip 64bit SOC
do not have CPUPD, and pmu_cpuson_entrypoint() is common
function for rockchip platform, so we need to check wakeup
cpu when resume.

Change-Id: I6313e8a9d7c16b03e033414f0cb281646c2159ff
Signed-off-by: Lin Huang <hl@rock-chips.com>

with PMU_PERILP_PD_EN bit enable, the soc will shutdown
cm0, crypto, dcf, imem(normal SRAM), dmac, bootrom, efuse_con,
spi, i2c, uart, saradc, tsadc when suspend, we have M0 code
need to run when suspend in normal SRAM, so we need to take
care of that.

Change-Id: I8c066637e5b81d4b1d53197450b9d592cbe00793
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This moves the DRAM restore code to PMUSRAM. This is so that the
voltage domain that contains the SRAM that it was stored in before may
be turned off during system suspend.

Change-Id: Id761181a30caadd12f1ce061d1034f3159a76d28
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This converts two functions to use for-loops. This saves a bit of
space to help moving DRAM resume code to PMUSRAM.

Change-Id: Ie6ca490cf50c2ec83335cf1845b337c3e8a47496
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The removed if statement would make the same check that the for loop
it is in does to break out of the for loop, so it doesn't make any
sense to keep it there.

Change-Id: I819c29f9182e6de1fc47e418aed15ad38e8f9fa9
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This removes the mmio_... function calls to set the multicast bit for
the PHY registers when overriding the write leveling values. These are
not needed since multicast is set by default when calling the
function, and it's also better not to leave the side effect of
disabling multicast when exiting the function.

Change-Id: I83e089a2a2d55268b3832f36724c3b2c4be81082
Signed-off-by: Derek Basehore <dbasehore@chromium.org>